Phased array antennas, capable of controlling the direction of their radiated beam, are demanded by many conventional as well as modern systems. Applications such as automotive collision avoidance radar, inter-satellite communication links and future man-portable satellite communication on move services require reconfigurable beam systems with stress on mobility and cost effectiveness. Microwave phase shifters are key components of phased antenna arrays. A phase shifter is a device that controls the phase of the signal passing through it. Among the technologies used to realize this device, traditional ferrite waveguide phase shifters offer the best performance. However, they are bulky and difficult to integrate with other system components. Recently, ferrite material has been introduced in Low Temperature Co-fired Ceramic (LTCC) multilayer packaging technology. This enables the integration of ferrite based components with other microwave circuitry in a compact, light-weight and mass producible package. Additionally, the recent concept of Substrate Integrated Waveguide (SIW) allowed realization of synthesized rectangular waveguide-like structures in planar and multilayer substrates. These SIW structures have been shown to maintain the merits of conventional rectangular waveguides such as low loss and high power handling capabilities while being planar and easily integrable with other components. Implementing SIW structures inside a multilayer ferrite LTCC package enables monolithic integration of phase shifters and phased arrays representing a true System on Package (SoP) solution. It is the objective of this thesis to pursue realizing efficient integrated phase shifters and phased arrays combining the above mentioned technologies, namely Ferrite LTCC and SIW. In this work, a novel SIW phase shifter in ferrite LTCC package is designed, fabricated and tested. The device is able to operate reciprocally as well as non-reciprocally. Demonstrating a measured maximum reciprocal phase shift of 132o and maximum non-reciprocal shift of 118o at 12 GHz. Additionally a slotted SIW antenna is designed and integrated with the phase shifter in an array format, demonstrating a beam scanning of ± 15o. The design is highly suitable for mobile automotive radars and satellite communications systems.

Phased array receivers are a set of antenna elements that are capable of forming multiple simultaneous beams over a field of view. In radio astronomy, the study of deep space radio sources, a phased array feed (PAF) is placed at the focus of a large dish telescope that spatially samples the focal plane. PAFs provide an increase in the field of view as compared to the traditional single pixel horn feed, thereby increasing survey speed while maintaining low sensitivity. Phased arrays are also capable of radio frequency interference (RFI) mitigation which is useful in both radio astronomy and wireless communications when detecting signals in the presence of interferers such as satellites. Digital signal processing algorithms are used to process and analyze data provided by phased array receivers. During the commissioning of the Focal-plane L-band Array feed for the Green Bank telescope (FLAG), sensitivity consistent with an equivalent system temperature below 18 K was measured. To demonstrate the astronomical capability of the receiver, a pulsar (PSR B2011+38) was detected, and an HI source (NGC4258) was mapped with the real-time beamformer and fine channel correlator, respectively. This work also details improvements made to the software of the FLAG digital backend such as the design and implementation of an algorithm to remove scalloping ripple from the spectrum of two cascading polyphase filter banks (PFB). This work will also provide a brief introduction to a model-based beam interpolation algorithm capable of increasing spatial resolution of radio source maps as well as reducing time spent performing calibration. The development of a phased array receiver digital back end for the Office of Naval Research (ONR) is also detailed. This broadband system will be capable of communication in hostile RFI-rich environments with the aid of a real-time RFI mitigation algorithm currently implemented in software. This algorithm will be compatible with other PAF receiver systems and will enable RFI mitigation in other applications such as radio astronomy. This work will provide details on the implementation of this algorithm, the development and modification of other system software as well as full system tests of the 150 MHz bandwidth receiver have been conducted and will be shown in this document.

Phased array receivers are a set of antenna elements that are capable of forming multiple simultaneous beams over a field of view. In radio astronomy, the study of deep space radio sources, a phased array feed (PAF) is placed at the focus of a large dish telescope that spatially samples the focal plane. PAFs provide an increase in the field of view as compared to the traditional single pixel horn feed, thereby increasing survey speed while maintaining low sensitivity. Phased arrays are also capable of radio frequency interference (RFI) mitigation which is useful in both radio astronomy and wireless communications when detecting signals in the presence of interferers such as satellites. Digital signal processing algorithms are used to process and analyze data provided by phased array receivers. During the commissioning of the Focal-plane L-band Array feed for the Green Bank telescope (FLAG), sensitivity consistent with an equivalent system temperature below 18 K was measured. To demonstrate the astronomical capability of the receiver, a pulsar (PSR B2011+38) was detected, and an HI source (NGC4258) was mapped with the real-time beamformer and fine channel correlator, respectively. This work also details improvements made to the software of the FLAG digital backend such as the design and implementation of an algorithm to remove scalloping ripple from the spectrum of two cascading polyphase filter banks (PFB). This work will also provide a brief introduction to a model-based beam interpolation algorithm capable of increasing spatial resolution of radio source maps as well as reducing time spent performing calibration. The development of a phased array receiver digital back end for the Office of Naval Research (ONR) is also detailed. This broadband system will be capable of communication in hostile RFI-rich environments with the aid of a real-time RFI mitigation algorithm currently implemented in software. This algorithm will be compatible with other PAF receiver systems and will enable RFI mitigation in other applications such as radio astronomy. This work will provide details on the implementation of this algorithm, the development and modification of other system software as well as full system tests of the 150 MHz bandwidth receiver have been conducted and will be shown in this document.

Phased array systems present desirable antenna features like beam steering and high gain. However, due to their high cost, civilian applications cannot generally afford them, restricting their usage to military. Hardware involved in phased array systems is expensive and the number of devices is high, since there is usually one device of each kind (filter, amplifier, shifter..) for each individual antenna. Alternative techniques, mainly based on TDMA, have been developed looking for lowering the number of elements in the system. However, these approaches increase the system bandwidth, multiplying it by a factor of $N$ (Number of antennas), as they use redundant information. In this thesis, a novel phased receiver, based on an economic sampling scheme is proposed. All the elements in an array receive a common information (signal amplitude) and a unique information (relative delay between elements). The idea is to sample only the information required to reconstruct the transmitted signal and discard the redundant one. This idea is achieved by sampling just one antenna during each RF cycle and then gathering all the information taking in account the relative delay between different antenna elements. The proposed technique is mathematically proved and validated by simulation. As a first approach, the equation for the received signal in the frequency domain is derived for a linear array. The radiation pattern and the received signals are simulated for equally spaced planar and linear arrays. Bandwidth signal transmission is demonstrated and tapering effects are shown. After that, the proposed technique is expanded for arbitrary structures and the resulting system bandwidth is enhanced by using different sampling order sequences. / Master of Science

3D display technology is limited by the user's ability to interact with displays without being connected to external equipment. In order to feel tactile feedback in conjunction with displays, ultrasonic sound pressure fields have been created; however, ceramic transducers interfere with the user's immersive experience. We have created transparent ultrasonic transducers using capacitive micromachined ultrasonic transducer (CMUT) and piezoelectric micromachined ultrasonic transducer (PMUT) technology that allow the user to remain immersed in the experience while interacting with the display. Individual transparent piezoelectric transducers made with indium tin oxide (ITO) and polyvinylidene fluoride (PVDF) generate 66.9dB with 91.6% transparency. Samples were phased and modulated using a field programmable gate array (FPGA) in a 36-element array.

Infrared (IR) dipole antenna-coupled metal-oxide-metal (MOM) tunnel diodes provide a unique detection mechanism that allows for determination of the polarization and wavelength of an optical field. By integrating the MOM diode into a phased-array antenna, the angle of arrival and degree of coherence of received IR radiation can be determined. The angular response characteristics of IR dipole antennas are determined by boundary conditions imposed by the surrounding dielectric or conductive environment on the radiated fields. To explore the influence of the substrate configuration, single dipole antennas are fabricated on both planar and hemispherical lens substrates. Measurements demonstrate that the angular response can be tailored by the thickness of the electrical isolation stand-off layer on which the detector is fabricated and/or the inclusion of a ground plane. Directional detection of IR radiation is achieved with a pair of dipole antennas coupled to a MOM diode through a coplanar strip transmission line. The direction of maximum angular response is altered by varying the position of the diode along the transmission line connecting the antenna elements. By fabricating the devices on a quarter wave layer above a ground plane, narrow beam widths of 35° full width at half maximum and reception angles of ± 50° are achievable with minimal side-lobe contributions. Phased-array antennas can also be used to assess the degree of coherence of a partially coherent field. For a two-element array, the degree of coherence is a measure of the correlation of electric fields received by the antennas as a function of the element separation.

Sound generation and radiation properties are studied of full-scale tactical jet engine noise. This is motivated by the high sound exposure levels from jet noise, particularly for tactical engines. Acoustic source reconstruction methods are implemented computationally on existing jet noise data. A comparative study is performed using numerical simulations to understand the capabilities of more advanced beamforming methods to successfully estimate the source properties of a distributed, partially correlated source distribution. The properties and limitations of each beamforming method are described. Having validated the methods, beamforming with regularization—via the Hybrid Method—is implemented on linear array measurements near an installed tactical engine. A detailed analysis of the correlation and coherence properties associated with the phased array measurements guides the implementation of the beamforming. When the measurements are used as inputs to the beamforming, they produce partially correlated, distributed sources in a full-order model representation. A processing technique is also implemented that increases the usable bandwidth of the array measurements to almost an order of magnitude above the array design frequency. To more appropriately study the equivalent sources, a decomposition technique is designed and implemented to create a reduced-order wavepacket model of the jet noise. The wavepacket model is modular and scalable to allow for the efficient characterization of similar jet noise measurements. It is also appropriate for its physical significance, as wavepackets are attributed to the turbulent flow as well as the hydrodynamic and acoustic properties of the radiation. The reduced order model can estimate the levels and coherence properties of the acoustic radiation and represents a significant step towards a complete jet noise prediction model.

Sound generation and radiation properties are studied of full-scale tactical jet engine noise. This is motivated by the high sound exposure levels from jet noise, particularly for tactical engines. Acoustic source reconstruction methods are implemented computationally on existing jet noise data. A comparative study is performed using numerical simulations to understand the capabilities of more advanced beamforming methods to successfully estimate the source properties of a distributed, partially correlated source distribution. The properties and limitations of each beamforming method are described. Having validated the methods, beamforming with regularization”via the Hybrid Method”is implemented on linear array measurements near an installed tactical engine. A detailed analysis of the correlation and coherence properties associated with the phased array measurements guides the implementation of the beamforming. When the measurements are used as inputs to the beamforming, they produce partially correlated, distributed sources in a full-order model representation. A processing technique is also implemented that increases the usable bandwidth of the array measurements to almost an order of magnitude above the array design frequency. To more appropriately study the equivalent sources, a decomposition technique is designed and implemented to create a reduced-order wavepacket model of the jet noise. The wavepacket model is modular and scalable to allow for the efficient characterization of similar jet noise measurements. It is also appropriate for its physical significance, as wavepackets are attributed to the turbulent flow as well as the hydrodynamic and acoustic properties of the radiation. The reduced order model can estimate the levels and coherence properties of the acoustic radiation and represents a significant step towards a complete jet noise prediction model.

A 3D Finite Element Boundary Integral technique (FE-BI) using mixed-order tangential vector finite elements (TVFE?s) is presented. This technique is used to design two wide band antennas and an ultra wideband (UWB) antenna array. Tetrahedral elements are used for domain discretization because they offer higher flexibility when simulating complex structures. A set of hierarchical mixed-order TVFE?s up to and including order 2.5 is implemented. Hierarchical mixed-order TVFE?s accurately simulate regions with high and low field variations. They also guarantee tangential field continuity across element boundaries and suppress spurious modes. The efficacy of the technique has been tested on two different wide band antennas and an UWB array. The first antenna is designed for automotive applications and covers GPS, GSM, XM, and PCS bands (0.8?3.35 GHz). The second antenna is a double sided rounded bowtie antenna (DSRBA) for UWB communication (3.1-10.6 GHz). The third design is a DSRBA array. For validation purposes, the antennas are also simulated using a commercially available high frequency electromagnetic simulation software, HFSS. Results regarding antenna parameters such as return loss, radiation pattern, and gain are also given.

The use of computer aided design (CAD) tools has catalyzed the growth of IC design techniques. The rapid growth in transistor count for synchronous digital circuits has increased circuit complexity. This growing complexity of synchronous circuits has exposed design issues such as clock skew, increased power consumption, increased electromagnetic interference and worst case performance. The increasing number of challenges posed by synchronous designs has encouraged researchers to explore asynchronous design techniques as an alternative methodology. Asynchronous circuits do not use a global clock signal that is the primary cause of many design challenges faced by synchronous designers. It has also been shown in some designs that asynchronous circuits consumes less power, and exhibits better average case performance than synchronous circuits. Asynchronous design techniques, even with their various advantages over synchronous systems, are not widely accepted by logic designers. This is due to the shortcomings of asynchronous design methodologies, primarily, the limited availability of CAD tool support and the use of proprietary specification languages. To overcome the shortcomings of current asynchronous design techniques, this research uses a methodology for designing asynchronous circuits starting from clocked RTL design. This research extends the concepts of Phased Logic (PL) and marked graphs to quasi-delay insensitive gates (QDI) gates to create an asynchronous PL-QDI methodology. The PL methodology is easy to use as it maps conventional RTL designs into delay insensitive PL circuits using commercial CAD tools. Caltech?s QDI gates exhibit fast forward latency, but the use of Caltech?s methodology requires a user skilled in the pecurialities of the Caltech design methodology. This research uses best of Caltech?s QDI circuit methodology and the PL methodology to come up with a new asynchronous PL-QDI methodology. It also presents a synthesis algorithm that uses commercially available synchronous CAD tools to map clocked designs to PL-QDI systems. Results of this research show that third-party clocked RTL codes including intellectual property (IP) cores can be converted to asynchronous PL-QDI systems using the PL-QDI CAD tools presented in this research. This work shows how mature synchronous CAD tools can be used to design clockless circuits.