Spelling suggestions: "subject:"disstacking"" "subject:"pstacking""
1 |
Stacked Conjugated Oligomers as Molecular Models to Examine Interchain Interactions in Conjugated MaterialsKnoblock, Kurt M. 20 November 2006 (has links)
Previous studies of the redox states of linear conjugated oligomers as models for polarons and bipolarons in conjugated polymers do not fully address the influence of intermolecular interactions on the electronic structure of conjugated systems in the solid state. Fusion of oligothiophenes onto a bicyclo[4.4.1]undecane core holds the conjugated oligomers in a permanent cofacial stack. One- and two-electron oxidation of the stacked oligomers affords mono(radical cation)s and dications that serve as models for polarons and bipolarons in p-doped conjugated polymers and demonstrates the effect of pi-stacking on the electronic structure of these species. Installation of phenyl-capped and ferrocenyl-capped oligothiophenes allows us to systematically vary pi-stacked oligomers and study intramolecular charge migration in other linear conjugated molecules.
|
2 |
How to assemble in water without really bonding : aromatic-donor acceptor interactions in foldamers, DNA intercalation and "pi-stacking"Martinez, Chelsea RamEl 21 February 2012 (has links)
Non-covalent interactions are of great interest to chemists and biologists who study the molecular structure and function of biological systems, as well as those who seek to control, undo, or improve upon the efficiency of these systems with man-made chemical tools. The Iverson group has specifically applied noncovalent aromatic donor-acceptor interactions to biotic and abiotic aqueous systems through the use of the electron-rich 1,5-dialkoxynaphthalene (DAN) and electron-deficient 1,4,5,8-naphthalenetetracarboxylic diimide (NDI) moieties.
Chapter 1 introduces and reviews the current state of self-assembly research, especially work conducted in aqueous media. Chapter 2 delineates the design and synthesis of a molecule that can self-assemble and form disulfide bonds, with the goal of creating higher-order structure. Chapter 3 comprises the design and synthesis of a series of pendant-NDI bisintercalators of DNA that are distinct from the backbone-incorporated intercalators previously employed in our laboratory. Chapter 4 contextualizes the term of art “pi-stacking,” reviewing the current state of knowledge of specific contributions to this effect and commenting on the putative uniqueness of the interaction. Theoretical and experimental work in the field is summarized.
The work discussed in this dissertation serves to expand the scope of programmability of our DNA intercalators, to probe the higher-order assembly behavior of our donor-acceptor pair, and to clarify the term “pi-stacking,” lately overused, that imperfectly describes the interaction that gives both these systems their compelling binding properties. / text
|
3 |
Computational Study of Pi-Pi Stacking Interactions in Large Curved and Planar Polycyclic Aromatic HydrocarbonsKarunarathna, A A Sasith N 14 December 2013 (has links)
Theoretical studies of pi-pi interactions on several dimers of curved polycyclic aromatic systems have been carried out. In the first part, dispersion corrected density functional theory methods (DC-DFT) were used to evaluate the basis set superposition errors (BSSE) in dispersion interactions of the corannulene dimer, and the accuracy of the calculations using DC-DFT methods was compared with high level benchmark calculations. In these calculations, Grimme’s B97D DC-DFT method provided reasonably accurate results with the benchmark calculations. In addition, BSSE obtained with the B97D method along with cc-pVQZ basis set was negligible. Furthermore, a series of calculations were carried out to obtain the pi-pi interaction energy and most stable conformation for the sumanene dimer system. In these calculations, Grimme’s B97D method was used. The potential energy minimum of the sumanene dimer was determined as the concave-convex stacked arrangement with one monomer unit rotated to 60°. The binding energy of the dimer was found to be 19.34 kcal/mol with a 3.72 angstrom distance between two monomer units. Dimers of three different heterosumanenes along with the parent sumanene were also studied. In this set of calculations, two different concave-convex dimer motifs were chosen, eclipsed and staggered (60° rotated). For all the heterosumanenes, as well as the parent sumanene, the staggered conformation is the most stable geometry. The parent sumanene had the highest binding energy. The –NH substituted sumanene produced the second highest binding energy, while the –O analog was the weakest bonded dimer. Finally, dispersion calculations were carried out for the planar aromatic compound of triphenylene. The pi-system of the dimer was distorted by rotating one monomer unit around the principle axis and parallel displacing one monomer unit relative to the other one. Among the rotational dimers, the 39° rotated dimer was the minimum energy conformation. Interaction energy of that dimer was 14.42 kcal/mol with 3.40 angstrom separation between monomers at the B97D/cc-pVQZ level. The parallel displaced minimum energy dimer has a binding energy about 1.0 kcal/mol smaller than the rotational minimum energy geometry.
|
4 |
UNHINDERED TRIANGULENE SALT PAIRS: SUBSTITUTION-DEPENDENT CONTACT ION PAIRING AND COMPLEX SOLVENT-SEPARATED DISCOTIC IONS IN SOLUTIONModekrutti, Subrahmanyam 01 January 2015 (has links)
This work sought to enforce aromatic interactions between compatible π-molecular orbital systems with ionic bonding. In this case the interacting partners are oppositely charged discotic triangulene derivatives. The observed properties of the heterodimeric ion-pairs likely arise due to a hypothetical synergy between electrostatics and π-interactions. The work presented here describes investigation of putative covalency arising from this hypothetical synergy in the electrostatics driven π-stacking. In order to probe this, various hypotheses were made and experiments were designed to test their validity. The results from the experiments show existence of contact ion-pairs and complex solvent-separated discotic ions in solution. The formation of complex ion-pairs arise due to the fact that the electrostatic interaction that brings the discotic ions together is strong, but does not neutralize when the contact is made. So, the dipole created by the monopoles in a dimeric contact ion-pair can attract ions at both termini forming oligomers. This process apparently continues towards highly aggregated states and then to nanometric species and at some point the material precipitates. The propensity to aggregate and form complex-ions limited our approach to the measurement of the energetics of the ion-pairing for two reasons: (1) the observables had a complex dependence on temperature, solvent, concentration and ionic strength; and (2) the mass in solution was undergoing kinetic evolution towards solid states. The turbidimetric effects arising due to aggregate formation further complicated the extraction of weak interactions between the ions and hence effects determination of ion-pairing constants.
|
5 |
Platinum Complexes and Zinc Finger Proteins: From Target Recognition to FixationTsotsoros, Samantha 01 January 2014 (has links)
Bioinorganic chemistry strives to understand the roles of metals in biological systems, whether in the form of naturally occurring or addition of non-essential metals to natural systems. Metal ions play vital roles in many cellular functions such as gene expression/regulation and DNA transcription and repair. The study of metal-protein-DNA/RNA interactions has been relatively unexplored. It is important to understand the role of metalloprotein interactions with DNA/RNA as this enhanced knowledge may lead to better understanding of diseases and therefore more effective treatments. A major milestone in the development of this field was the discovery of the cytotoxic properties of cisplatin in 1965 and its FDA approval in 1978. Since then, two other chemotherapeutic drugs containing platinum, carboplatin and oxaliplatin, have been used in the clinic. These three compounds are all bifunctional with the ligands surrounding platinum In the cis conformation and rearrangement of the ligands to the trans orientation results in a loss of cytotoxic properties due to rapid deactivation through binding to S-containing proteins. This enhanced reactivity yields new opportunities to study the reactions between proteins and DNA. One of the first crosslinking experiments used transplatin to crosslink NCp7 to viral RNA in order to understand how/where the protein bound to RNA. We have studied the interaction between cis and trans dinuclear platinum complexes and the C-terminal zinc finger (ZF). The trans complex reacts at a faster rate than the cis isomer and causes N- terminal specific cleavage of the ZF. The dinuclear structure plays a critical role in the peptide cleavage as studies with transplatin (the mononuclear derivative) does not result in cleavage. Monofunctional trans platinum-nucleobase complexes (MPNs) serve as a model for the binding of transplatin to DNA. This provides an interesting opportunity to study their reactions with S-containing proteins, such as HIV1 NCp7. MPNs have been shown to bind to the C-terminal ZF of HIV1 NCp7, resulting in zinc ejection. This occurs through a two-step process where the nucleobase π-stacks with Trp37 on the ZF, followed by covalent binding at the labile Cl site to Cys. MPNs have also shown antiviral activity in vitro. The labile Cl on MPNs reduces specificity of these compounds, as it leaves an available coordination site on the platinum center for binding to other S-proteins or DNA. Therefore, we have moved to an inert PtN4 coordination sphere, [Pt(dien)L]2+ (dien= diethylenetri- amine). Due to the strong bond between platinum and nitrogen, covalent reactions are highly unlikely to occur at rapid rates. The strength of the pi-stacking interaction between nucleobases (free and platinated) and the aromatic amino acid, tryptophan (Trp), showed an enhanced binding constant for platinated nucleobases. This was confirmed by density functional theory (DFT) calculations as the difference in energy between the HOMO of Trp and the LUMO of the nucleobase was smaller for the platinum complex. The studies were extended to the Trp-containing C-terminal ZF of HIV1 NCp7 and an increase in association constant was seen compared to free Trp. Reaction of PtN4 nucleobases compounds with a short amino acid sequence con- taining either Ala (no pi-stacking capabilities) or Trp (pi-stacking interactions) revealed an enhanced rate of reactivity for the Trp-containing peptide. This result supports the theory of a two-step reaction mechanism where the platinum-nucleobase complex recognizes the pep- tide through a pi-stacking interaction with Trp followed by covalent binding to the platinum center. The [Pt(dien)L]2+ motif allows for systematic modification of the structural elements surrounding platinum in a search for the most effective compound. Methylation of the dien ligand should, in theory, increase lipophilicity of the compounds, however, due to 2+ charge of the compounds, this simple association does not hold true. Analysis of the cellular accumulation profiles showed little change in the uptake with the addition of methyl groups to the dien ligand, in agreement with the non-linear change in lipophilicity. Modification of L using different nucleobases allows for the tuning of the strength of the π-stacking interaction between Trp and the platinum complex. The addition of inosine (which lacks a H-bonding donor/acceptor at the C2 position) resulted in a lower association constant with both N-AcTrp and the C-terminal zinc finger of HIV1 NCp7. Interestingly, the addition of xanthosine resulted in an ehanced pi-stacking interaction with the C-terminal zinc finger of HIV1 NCp7; likely as a results of the addition of a H-bonding donor (double-bonded O) at the C2 position. The ability of PtN4 nucleobase complexes to inhibit formation of the NCp7 complexation with viral RNA was studied by mass spectrometry and gel electrophoresis. Dissociation of the NCp7-RNA complex was seen upon addition of PtN4 compounds. These compounds were also able to retard formation of the NCp7-RNA complex when pre-incubated with the protein. These results have important implications as inhibition of complex formation between NCp7 and viral RNA has negative implications for viral replication. Despite the success of platinum-nucleobase compounds, it is important to evaluate all potential pi-stacking ligands. A series of pyridine- and thiazole-based compounds were evaluated for the strength of the pi-stacking interaction with N-AcTrp and the C-terminal ZF of HIV1 NCp7. There was notable increase in association constant for the platinum- DMAP (4-dimethylaminopyridine) complex compared to other ligands studied. This result highlights the importance of exploring multiple avenues for the design of specifically targeted inhibitors and further confirms the viability of the medicinal chemistry dual approach of target recognition (non-covalent) followed by target fixation (covalent).
|
6 |
Novel conducting polymeric materials: 1. Fluoroalkylated polythiophenes 2. Stacked oligothiophenes as models for the interchain charge transfer in conducting polymersLi, Ling 12 July 2004 (has links)
Polythiophenes have great potential as semiconductors for use in organic field effect transistors and light emitting diodes. Recent research has been focused on the design, synthesis and characterization of fluorinated polythiophenes and oligothiophenes. Various fluoroalkyl side chains have been introduced to induce polymer self-assembly, to control the electronic properties of the conjugated backbone, and to modify the solubility of the polymer in supercritical CO2.
This work led to the preparation of poly(3-(perfluorooctyl)thiophene), which is one of only a few examples of n-dopable polythiophenes, and is the first supercritical CO2-soluble conducting polymer. An alternating copolymer consisting of 3-perfluoroakyl and 3-alkylthiophene units has been synthesized. This polymer, with alternating electron-donating and withdrawing substituents, has a high quantum yield for fluorescence in solution relative to the two homopolymers, and strong fluorescence in solid state. Based on the study on its nanocrystals, the unusual photophyiscs may be due to the formation of the supramolecular structure with hexagonal packing.
A novel thiophene monomer, 3-(1,1-difluorooctyl)thiophene, was prepared to further tune the electronic structure of polythiophenes by changing the fluorination pattern of side chains, while retaining solubility in organic solvents by virtue of the hydrocarbon side chain. a-Hexyl-w-perfluorohexylsexithiophene was synthesized to make a novel amphiphilic material for use in TFTs.
Models for interchain charge transfer in doped conducting polymers were also developed. Stacked and unstacked conjugated oligomers have been synthesized as models for conducting polymers. The bis(radical cation) form and the dication-neutral form of compounds in which conjugated oligomers are held in a stacked arrangement are shown to coexist and in equilibrium with each other. The coexistence of these two forms further suggests that both may serve as charge carriers. Interconversion between these forms by disproportionation mimics a possible mechanism for charge migration in doped conjugated polymers.
|
7 |
PARTIALLY FLUORINATED POLYCYCLIC AROMATIC COMPOUNDS: SYNTHESIS AND SUPRAMOLECULAR BEHAVIORCho, Don Mark 01 January 2007 (has links)
The field of organic electronics has received much attention over the last few years, and engineering of organic crystals to grow with pi-electron systems arranged in a face-to-face motif has been shown to be beneficial in electronic devices. The effects of combining aromatic and perfluorinated aromatic derivatives have shown that the intramolecular stacking pattern can be changed from an edge-to-face arrangement to that of a face-to-face motif. Before the work described herein, there were no reported studies of the supramolecular behavior of fused polycyclic aromatic compounds with partial peripheral fluorination, inducing the desired face-to-face behavior. This is the main focus of the thesis. Furthermore, by exploiting the interactions between the fluorinated and non-fluorinated faces of the molecule, columnar liquid crystalline behavior can be achieved through variations of the alkyl substituents on the molecule.
|
8 |
Altering the Crystal Packing of Boronsubphthalocyanine Derivatives through Molecular EngineeringPaton, Andrew Simon 09 August 2013 (has links)
There are currently three known crystal packing motifs of boronsubphthalocyanine derivatives. Each motif is associated with a particular class of BsubPc derivatives, and none are ideal for organic electronic applications according to the criteria we defined for evaluation: having a continuous pathway for charge-carrier conduction in the solid-state, resistance to hydrolysis, good electrochemical and optical properties, and possession of a robust crystal form. In this thesis, we present five methods for altering the crystal packing structure of phenoxy-BsubPc derivatives in order to meet the above four criteria. We find that neither addition of steric bulk to the axial derivative nor changing the symmetry of the compounds is sufficient for creating a new crystal packing motif. We do find that reducing the symmetry of the axial group does increase the solubility greatly, however. We identify a new motif for BsubPc crystals that occurs when the intermolecular interactions between the axial phenoxy segment and the BsubPc ligand are increased. We present two methods for achieving this new motif, one is through addition of a π-Br interaction and the other is through creation of a strong π-acid/ π-base stacking by making the axial phenoxy more π-electron rich. Unfortunately, the p-bromophenoxy-BsubPc forms this new motif as a kinetic product, isolation of which is unreliable. Attaching a naphthol fragment axially to the BsubPc creates a stable version of this new motif. We also synthesized a new class of BsubPc pseudohalides based on sulfonate derivatives. Of the derivatives in this new class, we found that mesylate-BsubPc forms into a crystal packing structure that possesses a one-dimensional pathway for charge carrier mobility, but is still resistant to hydrolysis under the conditions tested. Overall, we show four compounds that meet the criteria for further study as organic electronic materials: p-methoxyphenoxy-BsubPc, α-naphthoxy-BsubPc, β-naphthoxy-BsubPc, and mesylate-BsubPc.
|
9 |
Altering the Crystal Packing of Boronsubphthalocyanine Derivatives through Molecular EngineeringPaton, Andrew Simon 09 August 2013 (has links)
There are currently three known crystal packing motifs of boronsubphthalocyanine derivatives. Each motif is associated with a particular class of BsubPc derivatives, and none are ideal for organic electronic applications according to the criteria we defined for evaluation: having a continuous pathway for charge-carrier conduction in the solid-state, resistance to hydrolysis, good electrochemical and optical properties, and possession of a robust crystal form. In this thesis, we present five methods for altering the crystal packing structure of phenoxy-BsubPc derivatives in order to meet the above four criteria. We find that neither addition of steric bulk to the axial derivative nor changing the symmetry of the compounds is sufficient for creating a new crystal packing motif. We do find that reducing the symmetry of the axial group does increase the solubility greatly, however. We identify a new motif for BsubPc crystals that occurs when the intermolecular interactions between the axial phenoxy segment and the BsubPc ligand are increased. We present two methods for achieving this new motif, one is through addition of a π-Br interaction and the other is through creation of a strong π-acid/ π-base stacking by making the axial phenoxy more π-electron rich. Unfortunately, the p-bromophenoxy-BsubPc forms this new motif as a kinetic product, isolation of which is unreliable. Attaching a naphthol fragment axially to the BsubPc creates a stable version of this new motif. We also synthesized a new class of BsubPc pseudohalides based on sulfonate derivatives. Of the derivatives in this new class, we found that mesylate-BsubPc forms into a crystal packing structure that possesses a one-dimensional pathway for charge carrier mobility, but is still resistant to hydrolysis under the conditions tested. Overall, we show four compounds that meet the criteria for further study as organic electronic materials: p-methoxyphenoxy-BsubPc, α-naphthoxy-BsubPc, β-naphthoxy-BsubPc, and mesylate-BsubPc.
|
10 |
Theoretical Investigations of pi-pi Interactions and Their Role in Molecular RecognitionSinnokrot, Mutasem Omar 07 July 2004 (has links)
Noncovalent interactions are of pivotal importance in many areas of chemistry, biology, and materials science, and the intermolecular interactions involving aromatic rings in particular, are fundamental to molecular organization and recognition processes. The work detailed in this thesis involves the application of state-of-the-art ab initio electronic structure theory methods to elucidate the nature of pi-pi interactions. The binding energies, and geometrical and orientational preferences of the simplest prototype of aromatic pi-pi interactions, the benzene dimer, are explored. We obtain the first converged values of the binding energies using highly accurate methods and large basis sets. Results from this study predict the T-shaped and parallel-displaced configurations of benzene dimer to be nearly isoenergetic.
The role of substituents in tuning pi-pi interaction is investigated. By studying dimers of benzene with various monosubstituted benzenes (in the sandwich and two T-shaped configurations), we surprisingly find that all of the substituted sandwich dimers considered bind more strongly than benzene dimer. We also find that these interactions can be tuned by a modest degree of substitution. Energy decomposition analysis using symmetry-adapted perturbation theory (SAPT) reveals that models based solely on electrostatic effects will have difficulty in reliably predicting substituent effects in pi-pi interactions.
|
Page generated in 0.0484 seconds