The Master's thesis is engaged in analyse of methods of pricing and comparison of each other. This work is compiled from historical evolution of prising immovables, over adjustment prising in international prising standards, over defination elementary conceptions to analysis selected ways of prising of houses. The Master's thesis analyses process of prising methods and analyses sources which we need to compile a ways of prising. These are most important things to know, when we want to compare ways of prising. There are ten houses in this work from Kroměříž and surroundings. The main target of master's thesis is to ratify and to explain that location of houses and their surroundings are the most importatnt. These two points of view influenced price and salableing of houses. There is a comparison of ways of prising houses at the end of work

This diploma thesis is focused on the comparison of selected methods of apartment valuation in the location of Brno - Černá Pole, in specific on the apartment valuation in brick buildings. The theoretical part describes the basic notions connected with valuation, describes the methods of valuation and also the valuated location itself. The practical part deals with the apartment valuation using these methods - the method according to price provision, specifically comparative technique, then the comparative method itself but not according to price provision and finally using the yield method for an assessment of the current price. In the conclusion there is comparison of all of these used methods.

The Master´s thesis is engaged in valuation of property in Germany. Special focus is given to on valuation methods applicable to apartment value estimation. In order to that comparative and capital valuation methods are described in detail within the scope of the thesis. These methods are applied on the example of apartment valuation of an current apartment in Münster in the thesis. Fundamental components of the thesis are an explanation of basic valuation methods, an explanation of basis terms, a method of determination of average rent, a basic legal regulations and a description of an expert´s assessment. Furthermore the thesis describes as well the actual situation on the real estate market in Germany.

This diploma thesis deals with the comparison of chosen valuation methods for real estate. The evaluated apartments are located in Otrokovice and Zlin. The theoretical section covers the basic terms associated with the valuation process and it describes the valuation methods which were chosen for this work, as well as the evaluated locations. The practical part is focused on the valuation of the apartments according to valid price provision based on a comparative method, a direct comparison method and yield method for an estimation of the current price.

This assignment concentrates on the problematics of encumbrance. It is about the flat ministry encumbrance in a family house. The job is split into two parts, written and suggested. The written part analyses general notions which are found in the pricing of the property’s belongings. Next, there are stated methods to pricing the property’s belongings. The next chapters are dealing with the legislation of eternal encumbrance, the procedures and the ways of their pricing. The second part, suggested, contains the pricing itself. The property’s belonging is priced in two methods. One of the methods to pricing is value regulations; the second method prices by the regular value. First, the whole family house is priced with all its’ accessories, on the principal of half basis ownership and the given area of the flats, we can consider the value of the priced flat at the same value as half of a family house. Next, the encumbrance itself is priced. The age of the authorised is considered in one group of 30 years and the second group of 80 years. The following step is deducting the value of the eternal encumbrance. From these given final results, we state the chosen price of the flat including taxing purposes. At the conclusion of the done job, evaluation and recommendation is done for pricing similar cases.

This diploma thesis is focused on the comparison of selected methods of apartment and commercial units valuation in the district of Žďár nad Sázavou. The theoretical part describes the basic notions connected with valuation, describes the methods of valuation and also the valuated location itself. The practical part deals with the apartment and commercial units valuation using these metods – the metods according to price provision, specifically comparative technice, then the komparative method itself byt not according to price provision and finály using the yield method for an assessment of the current price. In the conclusion there is comparison of all of these used methods.

The thesis focuses on the comparison of selected methods for valuated property type apartment. Valuating apartments are located in areas Decin, Ústí nad Labem and Most. The theoretical part focuses on the definition of basic terms, a description of the valuation methods associated with this dissertation and description of locations for the sites in terms of historical, cultural, social and economic. The practical part was to prepare drawings of assessed residential units and subsequent determination of prices of selected valuation methods – comparative method price by 2014 and 2015, by direct comparison and revenue method. In conclusion, the comparison of prices, according to the valuation method sused.

The project deals with structure design of a new – built house for elderly with accommodation capacity up to 28 persons. It is situated on the south side of the village Papradno in a flat lot with area of 6018,4 m2.The house for elderly was designed for disabled people, it has got two floors with irregular shape and the floor area of 920,83 m2 . On the first floor there is an accommodation part of building situated on the southwest side and there is an another part of building where are situated rooms like (kitchen for serving meals, dining room, boiler room, changing room for employee...) it is situated on the northeast side. On the second floor there is an accommodation part of building it is identical as in the first floor. And the another part of second floor it has got rooms like (offices, storages, chapel, club room...). A bearing system composed of uninforcement concret foundation, wall system of ceramic block Porotherm and the slab system composed of bearing panels Spiroll. The Spiroll panels is a bearing system for flat roof with clasic layer order.

This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.

The thesis deals with the microstrip filter design using defected ground structure (DGS). The difference between standard asymmetric microstrip technique and DGS is in using the structures etched in the microwave substrate ground plane. The DGS resonant characteristics are then used in filter design. The thesis consists of three factual parts. The first one (chapter 4) introduces the use of the DGS resonators in the lowpass filter design. It involves experimental analysis of one type of the lowpass filter. The second part (chapter 5) deals with a novel microstrip lowpass filter design method using DGS. The proposed method is verified by simulations and several samples are realized and measured. Finally, the third part (chapters 7 and 8) deals with the bandpass filter design using specific defected ground structure as a resonator. The resonators are used in a coupled resonator structure. Filters of various orders and resonator configurations are designed and simulated. A combination of the DGS resonators and half-wavelength microstrip resonators is introduced as well. Selected samples are realized and measurement results are compared with simulations.