The project was prepared with complete documentation of a new Motel at the level of building construction documentation. Motel has a capacity of 25 double beds and one single bed for the disabled. Built-up area is 984,2 square meters. Enclosure is designed as a flat roof. The supporting structure of the building consists of prefabricated reinforced concrete frame. Building design emphasizes on static solution and layout, fire safety, energy saving and safety of use. Drawings were processed in software for design - AutoCad

Main concern of the thesis is a structural design of main load bearing elements of steel, four-storey high administration building. Designed building has 36 m long and 24 m wide rectangular footprint. Roof is shaped into a hyperbolic paraboloid surface. Main load bearing structure is consisting of six main cross sections formed by truss columns, and generally curved roof truss beams, accompanied by storey supporting frames with composite slabs. Overall shape of the roof is defined by warped surface. Cladding of the building is consisting of aluminium facade system.

The subject of this final thesis is the preparation of a project documentation for the building construction of a new pension with restaurant and wine cellar. The compound is located in Vážany nad Litavou. Its location falls under Velké Pavlovice area. Due to the location in this wine-growing region is in the project located, a wine cellar with a vineyard. The project is designed as a guesthouse with the restaurant designed for families with children, and for holding small social or company events. For this purpose, is in the main building designed a lounge with capacity of 20 people and a restaurant with capacity of 60 persons. The accommodation capacity provided in the pension is 43 beds. Pension offers background designed for relaxation or wellness stays thanks to the sauna and whirlpool. The building has rectangular plan on two basements and two above-ground floors with a mono-pitched roof facing south. This makes it possible to use solar power from the roof and south-facing facade. Water from the roof of the building is collected in a small pond, which serves as a storage reservoir useful in case of fire and vineyard irrigation. Near the building there are paved and parking areas.

This thesis deals with the design of brewery in Litomyšl. Brewery with beer production 2000hl per year and restaurant for 140 guests and kitchen have the main function of the building. The building is designed as one construction object and its built-up area is 472,2 square meters. The building has a partial basement, two floors and it has structural masonry system. A load-bearing walls of two floors are formed by clay masonry and the load-bearing walls of the basement are formed by permanent formwork. A roof of the building is a flat roof with a slope of 3 percent and the finish is made of modifed bitumen membrane.

This thesis describes a design of a travel agency headquarters building. It is a four storey building without a basement made of longitudinal cast-in-place concrete frame system. The building is roofed with non-walkable flat roof and two terraces. Two flats are located in the facility in addition to offices, a café, a shop, a tour saleroom, a small storage, a departure waiting room and other facilities providing quality operation of a travel agency. The land on which the building is located is designed as a car park and parking areas for smooth departure of the travel agency clients.

This theses work is concerned with assessment of transfer line exchanger behind pusher furnace. First part is describing technical characteristic and parametres. The most important part of this theses is thermic calculation of the boiler. Last following part is concerned with suggestions of constructional modifications of heating surface for proper functioning of boiler. These modifications are demonstrated by scheme in the enclosure.

The thesis compares oxidation and fusion laser cutting methods in the production of sheet components called Trager consoles. Individual methods of laser cutting are compared in terms of achieved quality and properties of cutting areas. Consequently, the effect of these properties on consecutive technological operations, which are mainly threading and pressing the nuts into components, are evaluated. In the experimental part of the thesis the roughness of cut surfaces was measured and the cuts were classified into quality classes according to the ČSN EN ISO 9013 standard. Metallographic samples were taken in order to measure hardness and determine its course in the direction from the cutting edge into the material. The metallographic samples were further used for capturing detailed images on the microscope and assessing the quality of nuts pressing. Afterwards, the cut moments affecting taps were measured in order to verify the impact of cutting edge properties on threading. These measurements provided sufficient data for comparing the influence of cutting edge properties in individual methods of laser cutting on consecutive operations. Finally, individual methods were compared in terms of production costs. According to all the data and the conclusions reached, fusion method was identified as the most suitable method of laser cutting for components manufacturing.

This diploma thesis deals with a design of truck-centres count and location near the motorway D1. This design is a result of aspects which can influent truck-centres‘ count, size and location. There are derived the aspects on the basis of calculation of freight transport intensity till the year 2030 and its concurrence to accident frequency, traffic flow regulation, and also its concurrence to management of personnel labour (AETR), means of eventual maintenance need and means of vehicles’ reparation, services for motorway attendants and finally its concurrence to possibilities of controls by public authorities and police. In order to regulate freight transport traffic flows is calculated size of parking spaces and suggested their appropriate locations.

My thesis work will go in theoretical part about explanation of basic terms, that are commonly used in valuation of real estates like recreation cottages, which are used for permanent living. Way of preparation for measuring and imporant tools used during measuring proces are also described here. Individual ways of valuation are used in practical part. Result will be valorization of used methods and evaluation of the best method for each locality and type of real estate.

The aim of this master´s thesis is valuation of 11 real estate propetries of type flat in Ústí nad Orlicí by selected methods of valuation. Subsequently comparison of these methods and analysis of selected factors influencing the ascertained price and the standard price is done.