The ROC (Receiver Operating Characteristic) curve is a projection of two different cumulative distribution functions F0 and F1. On axis are values 1-F0(c) and 1-F1(c). The c-parameter is a real number. This curve is useful to check quality of discriminant rule which classify an object to one of two classes. The criterion is a size of an area under the curve. To solve real problems we use point and interval estimation of ROC curves and statistical hypothesis tests about ROC curves.

This master’s thesis is focused on measurement of electrical contact resistance. The beginning of the thesis is devoted to the introduction of the electrical contact resistance and electrical parameters of journal bearings. Next part of the thesis deals with engineering design of test rig. In order to verify functional measurement principle, the test rig based on engineering design has been made. In the end of the thesis the measuring devices and the measuring process is described. The measurement results from the test rig are presented.

This master‘s thesis deals with the design of horizontal heat recovery steam generators (HRSG) with two pressure levels after a combustion turbine. In the introduction part is performed thermal calculation and proposal of a heat transfer surfaces. Furthermore, are suggested dimensions of the drums and pipes for flooding and transferring. The emphasis is placed on the fulfillment the required parameters of steam and flue gas at HRSG outlet. At the end is calculated loss of boiler draft and made technical documentation a drawing of the boiler.

This master´s thesis is focused on detterminations of the difference between the standard price of a detached passive house and selected detached houses in Chomutov and its surroundings. The theoretical part of the thesis describes the basic terms used in real estate valuation. The main task of this thesis is in Chomutov establish the standard price of houses with regard to their implementation, to evaluate land forming their accessories and assess standart value house without land, in order to eliminate the influence of land price to the price of the property. For valuation has been selected 10 houses from the Ústecký kraj of 3 districts (Chomutov, Louny and Most).

The Thesis „Comparison of fruit trees prices ascertained by the simplified and yield method“ deals with the comparison of both pricing methods, where there are defined factors on the basis of ascertained facts which have essential influence on price difference of fruit trees and subsequently the proposal to their modification is made.

The aim of the thesis is the design of project documentation of the new-building of library including road and technical infrastructure. Project is concerned with urbanistic, architectonic and construction-technical design of the building. The main assignment of the building is information and education activities. Object the library provides a comprehensive library and bibliographic services for scientific-pedagogical employees and students of the Brno University of Technology, other universities and other specialistic public. It is a detached building situated in the cadastral area Veveří close to the area of the Faculty of Civil Engineering of the Brno University of Technology. Object has 3 above ground floors containing the reading rooms, the study rooms, area of the cafe and also allow storage of the book stock. Bearing structure of the building is formed by a monolithic reinforced concrete skeleton mounted on the base plate. Facade of the building is in front of the bearing structure, is ventilated and outer surface is formed by laminate cladding panels. Roofing of the object is flat vegetation roof with planting of extensive vegetation.

This thesis processes design of hot water heater. It was done thermal, hydraulic and basic strength calculations in the work and from their outcomes was set up a design of heat exchanger, which was afterwards modelled and drawn. In the beginning of the work is reader introduced to heat exchanger types and characteristics and also to its thermal processes. Then the work continues with thermal design of the heat exchanger, where the most important outcome is heat transfer surface with other geometric parameters, followed by hydraulic design, where pressure loss on water side was calculated. The calculations are finished up by basic strength design, calculating thickness of shell and tube walls. The thesis is ended with evaluation of computed design and description of its basic features.

The object of thesis is estimation of the normal price for property type of apartment in Hradec Králové, including finding of the extent to which is the normal price influenced by the type of supporting structure. A partial task is valuation of selected apartments using different valuation methods. The solution task were used the price regulation methods – cost method and comparative method and market valuation methods – yield method and the direct comparison method of valuation, which is estimated market value. Finally the thesis contain a recapitulation of prices and analysis of detected differences.

This thesis deals with remote access to mobile devices with the Android system and their remote control possibilities. The aim was to create the interface for mobile devices remote control by remote desktop and also for changing mobile device's settings remotely. I focused on the utility of remote control for assistance in mobile devices usage. The solution was to create an application with the control interface, then application being controlled, and the server enabling communication between them. The server has been created with use of the Node.js technology. Socket.io library has been used for enabling communication between applications in real time. The remote desktop utilizes sending of screenshots and its clicks coordinates. These clicks on the remote device are executed by hidden API. Remote settings change uses API of Android SDK. It has been managed to develop the system that enable the control of the Android device and also to change its settings, both remotely.

Heterogenní katalýza hraje významnou roli pro zvy¹ování efektivity rùzných procesù. Vysokou katalytickou aktivitu vykazují oxidy ceru patøící k tzv. reducibilním oxidùm, je¾ snadno uvolòují èi (zpìtnì) pøijímají atomy kyslíku prostøednictvím procesù redukce a oxidace. Zámìrem pøedlo¾ené práce je vypoèítat pásové struktury a øezy plochami konstantní energie objemových a povrchových systémù oxidu ceru pomocí kvantovì-mechanické "ab initio"metody Teorie hustotního funkcionálu. Numerické simulace jsou provádìny pomocí programového balíèku Quantum ESPRESSO za u¾ití metod rovinných vln a pseudopotenciálu. Silná korelace elektronù v pøípadì atomù ceru je modelována pøidáním Hubbardova U-èlenu. Hlavní dùraz je kladen na mo¾nost porovnávání teoretických výsledkù s tìmi získanými pomocí experimentální metody úhlovì-rozli¹ené fotoelektronové spektroskopie umo¾òující pøímý zisk jak pásových struktur, tak øezù plochami konstantní energie zkoumaného materiálu. Porovnání pomù¾e jak poznat mo¾nosti a mo¾né hranice zmínìné experimentální metody, tak i roz¹íøit její teoretické zázemí vedoucí k prohloubení znalostí materiálù perspektivních pro katalýzu. Klíèová slova: Teorie hustotního funkcionálu, Hubbardùv U-èlen, pásová struktura, plocha konstantní energie, Brillouinova zóna 1