Scaling down of the CMOS technology requires thinner gate dielectric to maintain high performance. However, due to the depletion of poly-Si gate, it is difficult to reduce the gate thickness further especially for sub-65 nm CMOS generation. Fully silicidation metal gate (FUSI) is one of the most promising solutions. Furthermore, FUSI metal gate reduces gate-line sheet resistance, prevents boron penetration to channels, and has good process compatibility with high-k gate dielectric. Poly-SiGe gate technology is another solution because of its enhancement of boron activation and compatibility with the conventional CMOS process. Combination of these two technologies for the formation of fully germanosilicided metal gate makes the approach very attractive. In this paper, the deposition of undoped Poly-Si₁₋xGex (0 < x < 30% ) films onto SiO₂ in a low pressure chemical vapor deposition (LPCVD) system is described. Detailed growth conditions and the characterization of the grown films are presented. / Singapore-MIT Alliance (SMA)

The continuous and aggressive dimensional miniaturization ofthe conventional complementary-metal-oxide semiconductor (CMOS)architecture has been the main impetus for the vast growth ofIC industry over the past decades. As the CMOS downscalingapproaches the fundamental limits, unconventional materials andnovel device architectures are required in order to guaranteethe ultimate scaling in device dimensions and maintain theperformance gain expected from the scaling. This thesisinvestigates both unconventional materials for the gate stackand the channel and a novel notched-gate device architecture,with the emphasis on the challenging issues in processintegration. High-κ gate dielectrics will become indispensable forCMOS technology beyond the 65-nm technology node in order toachieve a small equivalent oxide thickness (EOT) whilemaintaining a low gate leakage current. HfO2and Al2O3as well as their mixtures are investigated assubstitutes for the traditionally used SiO2in our MOS transistors. These high-κ filmsare deposited by means of atomic layer deposition (ALD) for anexcellent control of film composition, thickness, uniformityand conformality. Surface treatments prior to ALD are found tohave a crucial influence on the growth of the high-κdielectrics and the performance of the resultant transistors.Alternative gate materials such as TiN and poly-SiGe are alsostudied. The challenging issues encountered in processintegration of the TiN or poly-SiGe with the high-k are furtherelaborated. Transistors with TiN or poly-SiGe/high-k gate stackare successfully fabricated and characterized. Furthermore,proof-of-concept strained-SiGe surface-channel pMOSFETs withALD high-κ dielectrics are demonstrated. The pMOSFETs witha strained SiGe channel exhibit a higher hole mobility than theuniversal hole mobility in Si. A new procedure for extractionof carrier mobility in the presence of a high density ofinterface states found in MOSFETs with high-κ dielectricsis developed. A notched-gate architecture aiming at reducing the parasiticcapacitance of a MOSFET is studied. The notched gate is usuallyreferred to as a local thickness increase of the gatedielectric at the feet of the gate above the source/drainextensions. Two-dimensional simulations are carried out toinvestigate the influence of the notched gate on the static anddynamic characteristics of MOSFETs. MOSFETs with optimizednotch profile exhibit a substantial enhancement in the dynamiccharacteristics with a negligible effect on the staticcharacteristics. Notched-gate MOSFETs are also experimentallyimplemented with the integration of a high-κ gatedielectric and a poly-SiGe/TiN bi-layer gate electrode. Key words:CMOS technology, MOSFET, high-κ, gatedielectric, ALD, surface pre-treatment, metal gate, poly-SiGe,strained SiGe, surface-channel, buried-channel, notchedgate.

<p>The continuous and aggressive dimensional miniaturization ofthe conventional complementary-metal-oxide semiconductor (CMOS)architecture has been the main impetus for the vast growth ofIC industry over the past decades. As the CMOS downscalingapproaches the fundamental limits, unconventional materials andnovel device architectures are required in order to guaranteethe ultimate scaling in device dimensions and maintain theperformance gain expected from the scaling. This thesisinvestigates both unconventional materials for the gate stackand the channel and a novel notched-gate device architecture,with the emphasis on the challenging issues in processintegration.</p><p>High-κ gate dielectrics will become indispensable forCMOS technology beyond the 65-nm technology node in order toachieve a small equivalent oxide thickness (EOT) whilemaintaining a low gate leakage current. HfO₂and Al₂O₃as well as their mixtures are investigated assubstitutes for the traditionally used SiO₂in our MOS transistors. These high-κ filmsare deposited by means of atomic layer deposition (ALD) for anexcellent control of film composition, thickness, uniformityand conformality. Surface treatments prior to ALD are found tohave a crucial influence on the growth of the high-κdielectrics and the performance of the resultant transistors.Alternative gate materials such as TiN and poly-SiGe are alsostudied. The challenging issues encountered in processintegration of the TiN or poly-SiGe with the high-k are furtherelaborated. Transistors with TiN or poly-SiGe/high-k gate stackare successfully fabricated and characterized. Furthermore,proof-of-concept strained-SiGe surface-channel pMOSFETs withALD high-κ dielectrics are demonstrated. The pMOSFETs witha strained SiGe channel exhibit a higher hole mobility than theuniversal hole mobility in Si. A new procedure for extractionof carrier mobility in the presence of a high density ofinterface states found in MOSFETs with high-κ dielectricsis developed.</p><p>A notched-gate architecture aiming at reducing the parasiticcapacitance of a MOSFET is studied. The notched gate is usuallyreferred to as a local thickness increase of the gatedielectric at the feet of the gate above the source/drainextensions. Two-dimensional simulations are carried out toinvestigate the influence of the notched gate on the static anddynamic characteristics of MOSFETs. MOSFETs with optimizednotch profile exhibit a substantial enhancement in the dynamiccharacteristics with a negligible effect on the staticcharacteristics. Notched-gate MOSFETs are also experimentallyimplemented with the integration of a high-κ gatedielectric and a poly-SiGe/TiN bi-layer gate electrode.</p><p><b>Key words:</b>CMOS technology, MOSFET, high-κ, gatedielectric, ALD, surface pre-treatment, metal gate, poly-SiGe,strained SiGe, surface-channel, buried-channel, notchedgate.</p>