Structurally precision graphene nanoribbons (GNRs) have attracted great interest considering their prospective applications as organic carbon materials for nanoelectronics. The electronic properties of GNRs not only critically depend on the edge structure and width but also on the heteroatom type, doping position, and concentration. Motivated by the recent undisputable progress in the synthesis of stable boron-doped polycyclic aromatic hydrocarbons (B-PAHs), considerable efforts have been devoted to the precision synthesis of the corresponding boron-doped GNRs (B-GNRs) via bottom-up synthesis approach in recent years in view of the extraordinary ability of boron doping on modulating their physiochemical properties. In this review, an overview of the bottom-up organic synthesis of B-GNRs, including the precursor design and synthesis, structure characterization of the resulting B-GNRs, and investigation of their electronic properties is provided. Moreover, the future challenges and perspectives regarding the bottom-up synthesis of B-GNRs are also discussed. The authors hope that this review will further stimulate the synthesis and device integrations of B-GNRs with a combined effort from different disciplines.

No description available.

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are common contaminants of sediment, soils and biological tissues. These compounds pose a significant risk to biological and ecosystem health and functioning due to these compounds being mutagenic, carcinogenic and are known to disrupt the endocrine system. The bioaccumulation and biomagnification potential that these compounds possess mean that they are capable of affecting the entire food chain and are not limited to the organisms that are directly in contact with the compounds Even though there has been an increase in the attention on identifying the presence and impacts that these compounds may have in South Africa, the level of attention is lower than what it is in other countries around the world. Although South Africa has guidelines in place for other pollutants, such as metals, there are no such guidelines in place to monitor PAHs and PCBs.. Industries are known to release both PAHs and PCBs, mainly from incomplete burning processes and the release of oils and fuels in the case of PAHs, and from heat transfer fluids in the case of PCBs. Durban Bay and surrounding areas of eThekwini, KwaZulu-Natal are highly industrialised with many aquatic systems, in which these contaminants are likely to deposit. The aim of this research was to determine the concentrations of these compounds by means of chemical analysis and additionally biological analysis, using the H4IIE-luc bioassay and compare these levels to international guideline levels. It was found that the concentrations of the 23 analysed PAHs were 6.5–3 235.6 ng.g-1 and the concentration of the PCBs analysed were 0–113.83 ng.g-1. Many sites were found to be in exceedance of the guideline limits, particularly in the harbour. Toxic equivalency factors (TEF) were used to gauge the toxic equivalency (TEQ) of the PAHs and PCBs that were found. The TEQs were generally low, and were below any guideline levels. The assay revealed the extract containing the PCBs had a bioassay equivalence (BEQ) of 0–93.54 pgTCDDeq. g-1 and the extract containing the PAHs of 0–776.08 pgTCDD-eq.g-1. With a proportion of the sites exceeding guideline limits. The BEQ results were two to three orders of magnitude greater than the TEQs calculated from the concentrations determined by the instrumental analysis, however, followed a similar trend. Additionally chemical analysis was not performed on a full suite of compounds that are able to elicit a response from the cells, which could be a reason why the BEQ and TEQ did not follow a similar trend among some of the samples. It would have been more beneficial to have performed chemical analysis on the 16 priority PAHs (as determined by the United States Environmental Protection Agency), the dioxin-like PCBs and polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDFs) which are all capable of eliciting a response from the cells and have TEF values. The areas that were most affected by contamination of these compounds was the harbour and surrounding canals, and there was point source contamination along the Umhlatuzana, Umbilo, and Amanzimnyana Rivers. All dl-PCBs should be chemically analysed at all the sample areas, as these cause adverse effects to biota. In addition to this, biota should be sampled to determine concentrations of the compounds to determine bioavailability and the degree of bioaccumulation in the food chain. Utilising biomarkers it would be possible to determine stresses of fish. / MSc (Environmental Sciences), North-West University, Potchefstroom Campus, 2014

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are common contaminants of sediment, soils and biological tissues. These compounds pose a significant risk to biological and ecosystem health and functioning due to these compounds being mutagenic, carcinogenic and are known to disrupt the endocrine system. The bioaccumulation and biomagnification potential that these compounds possess mean that they are capable of affecting the entire food chain and are not limited to the organisms that are directly in contact with the compounds Even though there has been an increase in the attention on identifying the presence and impacts that these compounds may have in South Africa, the level of attention is lower than what it is in other countries around the world. Although South Africa has guidelines in place for other pollutants, such as metals, there are no such guidelines in place to monitor PAHs and PCBs.. Industries are known to release both PAHs and PCBs, mainly from incomplete burning processes and the release of oils and fuels in the case of PAHs, and from heat transfer fluids in the case of PCBs. Durban Bay and surrounding areas of eThekwini, KwaZulu-Natal are highly industrialised with many aquatic systems, in which these contaminants are likely to deposit. The aim of this research was to determine the concentrations of these compounds by means of chemical analysis and additionally biological analysis, using the H4IIE-luc bioassay and compare these levels to international guideline levels. It was found that the concentrations of the 23 analysed PAHs were 6.5–3 235.6 ng.g-1 and the concentration of the PCBs analysed were 0–113.83 ng.g-1. Many sites were found to be in exceedance of the guideline limits, particularly in the harbour. Toxic equivalency factors (TEF) were used to gauge the toxic equivalency (TEQ) of the PAHs and PCBs that were found. The TEQs were generally low, and were below any guideline levels. The assay revealed the extract containing the PCBs had a bioassay equivalence (BEQ) of 0–93.54 pgTCDDeq. g-1 and the extract containing the PAHs of 0–776.08 pgTCDD-eq.g-1. With a proportion of the sites exceeding guideline limits. The BEQ results were two to three orders of magnitude greater than the TEQs calculated from the concentrations determined by the instrumental analysis, however, followed a similar trend. Additionally chemical analysis was not performed on a full suite of compounds that are able to elicit a response from the cells, which could be a reason why the BEQ and TEQ did not follow a similar trend among some of the samples. It would have been more beneficial to have performed chemical analysis on the 16 priority PAHs (as determined by the United States Environmental Protection Agency), the dioxin-like PCBs and polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDFs) which are all capable of eliciting a response from the cells and have TEF values. The areas that were most affected by contamination of these compounds was the harbour and surrounding canals, and there was point source contamination along the Umhlatuzana, Umbilo, and Amanzimnyana Rivers. All dl-PCBs should be chemically analysed at all the sample areas, as these cause adverse effects to biota. In addition to this, biota should be sampled to determine concentrations of the compounds to determine bioavailability and the degree of bioaccumulation in the food chain. Utilising biomarkers it would be possible to determine stresses of fish. / MSc (Environmental Sciences), North-West University, Potchefstroom Campus, 2014

Marshy soil and sediment samples were collected during dry and rainy seasons within Warri, and Agbarho, 20km away as control. Levels of 16 USEPA priority Polycyclic Aromatic Hydrocarbons PAHs were determined using GC-FID. Source prediction analysis was also done. The study was in Niger Delta region, Nigeria from January to March and June to August 2012 in dry and wet seasons. Benzo(a)pyrene had highest total concentration of 3.302mg/kg and mean value of 1.651mg/kg in dry season soil samples. However, sediment samples had highest levels for total concentration of PAHs of 19.362mg/kg and mean of 4.840mg/kg for both dry and rainy seasons within Warri. PAHs concentration was higher in dry than rainy seasons for soil and sediment samples. Source prediction analysis revealed that PAHs in sediments for dry season were pyrolytic while rainy seasons were petrogenic sources. For soils, the dry season was mixed sources while the rainy season was petrogenic. / Environmental Science / M. Sc. (Environmental Science)

Thesis (MScAgric)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: In recent years South African wines have been under the spotlight due to references in the international wine media to a distinctive ‘burnt rubber’ character. Many winemakers and wine experts argued that the peculiar character could be ascribed to winemaking errors linked to mismanaged fermentation. An alternative possible source of the taint was identified in the coal tar creosote used as a wood preservative in vineyard trellis systems. South African regulations allow for the use of creosoted utility poles in agricultural land, but in Europe and USA their usage has been highly regulated and even banned for certain applications. Contamination of foodstuff by polycyclic aromatic hydrocarbons (PAHs) is one of the major motives for the banning of creosote in Europe and USA. Some of the compounds in the creosote mixture display very strong odour characteristics and for this reason it became the focus of attention for the present study. The overall aim of this study was to determine if vines trellised with creosoted posts could accumulate or absorb the various malodorous compounds deriving from the wood treatment onto the grape berries. These compounds could then be extracted from the grape berries into the wine during alcoholic fermentation, creating quality and sensory problems. Chapter 2 of this thesis gives an overview of the extensive literature that deals with methods of analysis of PAHs and malodorous phenols using both Gas Chromatography (GC), as well as High Performance Liquid Chromatography (HPLC). New methods for sample preparation, as well as analysis of PAHs using HPLC-Diode Array Detector (DAD), were developed and the results reported in Chapter 3. It was demonstrated that Sauvignon blanc experimental wines contained only chrysene at very low levels. The concentrations of chrysene found in the experimental wines are within the prescribed parameters as established by The Commission of the European Communities. Since no other PAH compounds were found in the samples analysed, it was concluded that the experimental wines were safe for human consumption and complied with EU regulations. The effect of vineyard posts on the sensorial characteristics of wine is discussed in Chapter 4. Creosoted poles were found to be responsible for an off-flavour described as ‘burnt rubber’ and ‘tarry’ in Merlot wines produced from grapes grown in close proximity to the posts. Following some of the reported findings, new guidelines have been introduced in the Integrated Production of Wine certification, which advise against the use of creosoted poles for vineyard trellising. This preliminary but important guideline will bring the South African wine industry a step closer to the fulfilling the obligations for food safety as required by the legislation of our major export partners. Future investigations are recommended to completely understand and evaluate the cumulative effect of creosoted posts in a fully trellised vineyard. / AFRIKAANSE OPSOMMING: Oor die afgelope paar jaar is Suid-Afrikaanse wyne onder die soeklig geplaas as gevolg van verwysings in die internasionale wynmedia na ‘n duidelike ‘gebrande rubber’-karakter. Baie wynmakers en wyndeskundiges het aangedui dat hierdie besonderse karakter toegeskryf kan word aan wynbereidingsfoute wat verband hou met gisting wat wanbestuur is. ‘n Alternatiewe moontlike oorsprong van die smaak is geïdentifiseer in die koolteer wat as ‘n houtpreserveermiddel in wingerdopleistelsels gebruik word. Suid-Afrikaanse regulasies maak voorsiening vir die gebruik van kreosoteerde nutspale in landbougrond, hoewel hulle gebruik in Europa en die VSA hoogs gereguleerd en in sommige gevalle selfs verbied is. Die besmetting van kossoorte deur polisikliese aromatiese koolwaterstowwe (polycyclic aromatic hydrocarbons (PAHs)) is een van die vernaamste redes vir die verbanning van kreosoot in Europa en die VSA. Sommige van die verbindings in die kreosootmengsel het baie sterk geurkenmerke en daarom is dit die fokus van die huidige studie. Die oorhoofse doelwit van hierdie studie was om te bepaal of wingerde wat op kreosoteerde pale opgelei is, die verskillende onwelriekende verbindings afkomstig van die houtbehandeling in die druiwekorrels kan akkumuleer of absorbeer. Hierdie verbindings sou dan tydens alkoholiese gisting uit die druiwekorrels in die wyn geëkstraheer kon word, wat aanleiding sou gee tot kwaliteits- en sensoriese probleme. Hoofstuk 2 van hierdie tesis verskaf ‘n oorsig van die breedvoerige literatuur wat handel oor metodes om PAH’s en onwelriekende fenole met behulp van beide gaschromatografie (GC) en hoëdrukvloeistofchromatografie (HPLC) te analiseer. Nuwe metodes is ontwikkel om monsters voor te berei en om PAH’s met behulp van ‘n HPLC-diode array detector (DAD) te analiseer. Die resultate word in Hoofstuk 3 gerapporteer. Daar is aangetoon dat die eksperimentele Sauvignon blanc-wyne chriseen teen baie lae vlakke bevat het. Die konsentrasies van chriseen wat in die eksperimentele wyne gevind is, is binne die voorgeskrewe parameters van die Kommissie van die Europese Gemeenskap. Aangesien daar nie ander PAHverbindings in die geanaliseerde monsters gevind kon word nie, is daar tot die gevolgtrekking gekom dat die eksperimentele wyne veilig is vir menslike verbruik en aan die EG-regulasies voldoen. Die effek van wingerdpale op die sensoriese kenmerke van wyn word in Hoofstuk 4 bespreek. Kreosoteerde pale is gevind wat verantwoordelik is vir ‘n wangeur in Merlot-wyne afkomstig van druiwe wat naby die pale gegroei het en wat as ‘gebrande rubber’ en ‘teeragtig’ beskryf is. Op grond van sommige van die gerapporteerde bevindings, is nuwe riglyne ingesluit in die sertifisering vir die Geïntegreerde Produksie van Wyn, wat aanbeveel dat kreosoteerde pale nie vir wingerdoplei gebruik word nie. Hierdie voorlopige, maar belangrike riglyn sal die Suid-Afrikaanse wynbedryf al beter in staat stel om te voldoen aan die voedselveiligheid regulasies wat vereis word deur die wetgewing van ons belangrikste uitvoervennote. Toekomstige ondersoeke moet aangewend word om die kumulatiewe effek van kreosoteerde pale in volledig opgeleide wingerde ten volle te verstaan en te evalueer. / Indaba Scholarship and Winetech for their financial support

Soils contaminated by hydrophobic organic pollutants like polycyclic aromatic hydrocarbons (PAHs) are a common concern since they are extremely difficult to remove and their potential toxicological impacts are significant. As an alternative to traditional thermal or physical treatments, soil washing and soil flushing processes appear to be conceivable and efficient approaches, especially for higher level of pollution. However, the treatment of highly loaded soil washing/flushing solutions is another challenge to overcome. In that way, a new integrated approach is suggested: soil washing/flushing processes combined to an electrochemical advanced oxidation process (EAOP) in a combination with a recirculation loop (to save extracting agents) and/or a biological post-treatment step (to minimize energy cost).Extraction efficiency of the extracting agent like hydroxypropyl-beta-cyclodextrin (HPCD) is compared to the traditional non-ionic surfactant Tween 80 in synthetic and real soil washing solutions. A new simple fluorescent sensitive and selective quantification method is developed to monitor Tween 80 oxidation. Two EAOPs were compared: electro-Fenton (EF) and anodic oxidation (AO). Platinum (Pt) (in EF process) and boron doped diamond (BDD) (in both treatment) anodes are the respective electrodes employed to recycle effluents and to consider a biological post-treatment, respectively. Regarding the extracting agent recovery, the biodegradability evolution of effluent and the energy consumption (in kWh (kgTOC)-1) during EAOP, HPCD is more advantageous than Tween 80. However, in terms of extraction efficiency, costs of extracting agents and impact on soil respirometry, Tween 80 is much more efficient. By considering all these advantages and drawbacks, Tween 80 could still appear to be the best option

Afin de dépolluer et de réhabiliter les sols contaminés par des hydrocarbures aromatiques polycycliques (HAP), différentes techniques ont été développées durant les dernières décennies, mais leur impact sur les fonctions du sol est rarement pris en compte. L'objectif de ce travail était d'évaluer l'impact des traitements par oxydation chimique sur différents paramètres physico-chimiques et biologiques de terres contaminées aux HAP et de proposer des solutions pour restaurer le fonctionnement biologique des terres oxydées. Les différentes expérimentations de laboratoire et de terrain ont montré que l'efficacité des réactions d'oxydation chimique (réaction de Fenton et persulfate activé) sur la teneur en HAP dépendait de la disponibilité de la pollution et des propriétés physico-chimiques des terres. Par ailleurs, des processus d'acidification ont été observés sur des terres non carbonatées, altérant fortement et durablement les paramètres physico-chimiques et biologiques. Cette altération était plus forte après utilisation du persulfate activé, engendrant ainsi des pertes en éléments traces métalliques dans les eaux de percolations. L'apport de matériaux susceptibles d'augmenter le pH a permis la restauration des activités biologiques et la capacité des terres à supporter la végétation lorsque les terres ont fortement été acidifiées. L'association de traitements d'oxydation chimique et de refonctionnalisation pourrait présenter un moyen de réhabilitation efficace. Un indice, dont l'objectif était de représenter l'état du sol en fonction du poids accordé à différents paramètres, a été proposé et a permis d'évaluer les variations induites par les traitements d'oxydation et les procédés de refonctionnalisation / In order to clean up polycyclic aromatic hydrocarbon (PAH) contaminated soils, various techniques have been developed during the last decades, but their impact on soil functions was rarely considered. The objective of this study was to assess the impact of chemical oxidation treatments on different physico-chemical and biological parameters of PAH contaminated soil and to propose solutions to improve the biological functioning of oxidized soil. Various laboratory and field experiments have shown that the efficiency of chemical oxidation reactions (Fenton reaction and activated persulfate) on PAH concentrations depended on pollutant availability and soil physico-chemical properties. Besides, intense acidification processes have been observed on uncarbonated soil with a strong impact on soil physico-chemical and biological parameters. Moreover, this alteration was higher with activated persulfate treatment, leading to the loss of trace metals in water percolation. In the strongly acidified soil, the input of materials, suitable for pH increase, resulted in the restoration of biological activities and soil capacity to support vegetation. The association of chemical oxidation treatment and restoration techniques could present a good mean for soil rehabilitation. Finally, an index, which aimed to represent soil conditions based on the weight given to different parameters, was proposed and was used to evaluate changes induced by oxidation treatments and restoration techniques

The aim of the study was to determine the 13 health risk PAHs (phenanthrene, anthracene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, ideno(1,2,3-cd)perylene and coronene; c-PAU highlighted) in the fractions of size-segregated aerosol of the urban air in Ostrava (2012, 2014) and Mlada Boleslav (2013) at low temperatures in winter, and to verify experimentally a sampling artifact, i.e., to quantify PAHs in the gas phase. For the particle size separation high-volume cascade impactor Hi-Vol BGI 900 was used. PAHs were determined by HPLC-FLD/PDA. In Ostrava in 2012 during the winter inversion (up to -25 řC), mean concentration of 13 PAHs in aerosol was 432 ng.m-3 ; in fraction 10 - 1 µm 119 ng.m-3 , 1 - 0,5 µm 185 ng.m-3 , 0,5 - 0,17 µm 91 ng.m-3 , in fraction < 0,17 µm 37 ng.m-3 and in the gaseous phase of min. 40 ng.m-3 . In the most unfavorable day 2. 2. 2012 (-18.6 ř C) reached the 24-hour average of 13 PAHs 890 ng.m-3 , the sum of carcinogenic PAHs 237 ng.m-3 and benzo(a)pyrene 32.3 ng.m-3 . An irregular and different decline of PAHs concentrations after inversion was measured: in fraction 1 - 10 µm 2.8 times, 0.5 - 1 µm 4.2 times, 0.5 - 0.17 µm 4 times and for <0.17 µm up to 7.6 times....

Les HAP font partie de la classe des polluants organiques persistants dans les sols. Dans le cadre de la réhabilitation d'anciennes friches industrielles, il est nécessaire de comprendre l'origine de leur forte rétention et de connaître leurs possibilités de re-mobilisation à l'eau. Pour cela, une évaluation du potentiel de re-mobilisation à l'eau de matrices industrielles polluées a été réalisée sur 6 mois à l'aide de réacteurs fermés dont la solution est renouvelée mensuellement. Des expériences d'adsorption/désorption du 14C-fluoranthène sur ces mêmes matrices ainsi que sur une terre agricole ont confirmé que le fluoranthène s'adsorbe par interaction hydrophobe. L'affinité exceptionnelle des HAP pour les matrices présentant une pollution amassée est associée à leur re-mobilisation limitée par le faible contact de l'eau avec les surfaces de ces matrices hydrophobes. Notre étude met également en évidence la désorption plus lente de HAP "natifs" par rapport à des HAP ajoutés récemment, traduisant une modification du comportement de HAP au cours du temps. Afin de comprendre les mécanismes impliqués dans ce "vieillissement" au sein de terres industrielles, une expérience d'incubation de petites colonnes de sol, contaminées par du 14C-fluoranthène, a été conduite sur 6 mois. Dans les matrices à pollution amassée, le fluoranthène reste sous une forme extractible. Dans les matrices présentant une pollution moins importante et non amassée, le devenir des résidus du 14C-fluoranthène est contrôlé par l'activité de la microflore. Il est montré en particulier que les produits de dégradation sont en effet plus mobiles et peuvent pénétrer dans la porosité et y être séquestrés / PAH are persistent organic pollutants in soils. In the framework of industrial waste lands rehabilitation, one needs to understand the reasons of their strong retention and to assess their potential for water remobilization. For these purposes, the remobilization potential of industrial polluted matrices was assessed during 6 months in closed reactors with a monthly renewal of the solution. Adsorption / desorption experiments with 14C-fluoranthene on the same matrices and an agricultural soils confirmed the adsorption of fluoranthene by hydrophobic interaction. The PAH dramatic affinity for matrices containing pure organic phases is combined with their hindered remobilization due to the low surface contact with water of these hydrophobic matrices. Our work also pointed out desorption differences between native and a lab-added PAH, indicating modifications of PAH behaviour in soils. In order to understand the mechanisms involved in this "ageing" in industrial soils, an incubation experiment was conducted during 6 months with small soil columns spiked with 14C-fluoranthene. In matrices containing pure organic phase, fluoranthene remained in an extractable state. In less polluted matrices containing a diffuse pollution, fluoranthene fate was controlled by microflora activity. Our results demonstrated in particular that degradation products that are more mobile than the parent compound can diffuse in the porosity and be sequestered within