61 |
Transient stability-constrained load dispatch, ancillary services allocation and transient stability assessment procedures for secure power system operationKarimishad, Amir January 2008 (has links)
[Truncated abstract] The present thesis is devoted to the development of new methods for transient stability-constrained optimal power flow, probabilistic transient stability assessment and security-constrained ancillary services allocation. The key objective of the thesis is to develop novel dispatch and assessment methods for power systems operation in the new environment of electricity markets to ensure power systems security, particularly transient stability. A new method for economic dispatch together with nodal price calculations which includes transient stability constraints and, at the same time, optimises the reference inputs to the Flexible AC Transmission System (FACTS) devices for maintaining power systems transient stability and reducing nodal prices is developed. The method draws on the sensitivity analysis of time-domain transient stability simulation results to derive a set of linearised stability constraints expressed in terms of generator active powers and FACTS devices input references. '...' The low computing time requirement of the two-point estimate method allows online applications, and the use of detailed power systems dynamic model for time-domain simulation which offers high accuracy. The two-point estimate method is integrated in a straightforward manner with the existing transient stability analysis tools. The integrated software facility has potential applications in control rooms to assist the system operator in decision making process based on instability risks. The software system when implemented on a cluster of processors also makes it feasible to re-assess online transient stability for any change in system configuration arising from switching control. The method proposed has been tested on a representative power system and validated using the Monte Carlo simulation. In conjunction with the energy market, by which forecasted load demand is met by generator dispatch, ancillary services are required in relation to control for secure system operation and power quality. The final part of the thesis has a focus on the key aspect of allocating these ancillary services, subject to an important constraint that the dispatch of the ancillary services will not impair the system security achieved in the load dispatch. With this focus and requirement, the thesis develops a new dispatch formulation in which the network security constraints are represented in the optimal determination of generator active power schedule and allocation of ancillary services. Contingencies considered include power demand variations at individual load nodes from the values specified for the current dispatch calculation. The required changes in generator active powers to meet the new load demands are represented by additional control variables in the new dispatch formulation which augment those variables in the traditional OPF dispatch calculation. Based on the Lagrange function which includes the extended set of security constraints, the formulation derives the optimality condition to be satisfied by the dispatch solution, together with the marginal prices for individual ancillary service providers and LMPs. The effects of the security constraints are investigated and discussed. Case studies for representative power systems are presented to verify the new dispatch calculation procedure.
|
62 |
Electric Power Generation and Storage Using a High Voltage ApproachBolund, Björn January 2006 (has links)
<p>Production and consumption of electricity have grown enormously during the last century. No mater what the primary source of energy is, almost all generation of electricity comes from conversion of a rotational movement in a generator. The aim of this thesis is to see how high voltage technology influence production and storage of electricity. Power flow in the generators used to convert mechanical movement to electric energy is analyzed using Poynting‘s vector. The impact of new generator technology for efficient extraction of hydroelectric power is shown. Simulation of a large permanent magnet turbo generator is presented. A flywheel storage system for electric vehicles utilizing high voltage technology is also presented. In pulsed power applications, a cheap method for intermediate storage of energy during milliseconds, which enables an inductive primary storage is presented and experimentally tested.</p>
|
63 |
Electric Power Generation and Storage Using a High Voltage ApproachBolund, Björn January 2006 (has links)
Production and consumption of electricity have grown enormously during the last century. No mater what the primary source of energy is, almost all generation of electricity comes from conversion of a rotational movement in a generator. The aim of this thesis is to see how high voltage technology influence production and storage of electricity. Power flow in the generators used to convert mechanical movement to electric energy is analyzed using Poynting‘s vector. The impact of new generator technology for efficient extraction of hydroelectric power is shown. Simulation of a large permanent magnet turbo generator is presented. A flywheel storage system for electric vehicles utilizing high voltage technology is also presented. In pulsed power applications, a cheap method for intermediate storage of energy during milliseconds, which enables an inductive primary storage is presented and experimentally tested.
|
64 |
Physical Hybrid Model : Measurement - Experiment - SimulationWeingarten, Leopold January 2012 (has links)
A method has been developed, Physical Hybrid Model, to investigate the physical large scale electrical effects of a Battery Energy Storage System (BESS) on a distribution grid by scaling the response from a small size Research Development and Demonstration (RD&D) platform. In order to realize the model the control system of an existing RD&D platform was refurbished and stability of components ensured. The Physical Hybrid Model proceeds as follows: Data from a distribution grid are collected. A BESS cycle curve is produced based on analyzed measurements. Required BESS power and capacity in investigated grid is scaled down by factor k to that of the physical test installation of the RD&D platform. The scaled BESS cycle is sent as input to control of the battery cycling of the RD&D platform. The response from the RD&D platform is scaled – up, and used in simulation of the distribution grid to find the impact of a BESS. The model was successfully implemented on a regional distribution grid in southern Sweden.
|
65 |
Voltage Stability Study for Dynamic Load with Modified Orthogonal Particle Swarm OptimizationLin, Wu-Cheng 24 June 2011 (has links)
The thesis use capacitors, Static Synchronous Compensator (STATCOM) and wind generator to get optimal voltage stability for twenty-four-hour dynamic load by compensating real/reactive power.
In the thesis, Modified Orthogonal Particle Swarm Optimizer (MOPSO) is proposed to find the sitting and sizing of capacitors, STATCOM and wind generator, and integrate Equivalent Current Injection (ECI) algorithm to solve Optimal Power Flow (OPF) to achieve optimal voltage stability. The algorithm uses MOPSO to renew STATCOM and wind turbine sizing Gbest with multiple choices and Taguchi orthogonal array, which improves Particle Swarm Optimizer (PSO) without falling into the local optimal solution and searches optimal voltage stability of power system by load balancing equation and inequality constraints. Average Voltage Variation (AVV) and Average Voltage Drop Variation (AVDV) are proposed as objective function to calculate whole system voltage variations, and convergence test of MOPSO.
The IEEE 33 Bus distribution system and Miaoli-Houlong distribution system were used for simulation to test the voltage control during peak and off-peak periods of Taipower. Compensation of real/reactive power was used to get optimal system voltage stability for each simulated case.
|
66 |
Experimental Verification for the Power-Flow of the Parallel-type Independently Controllable Transmission MechanismsLiao, Wei-Hsiang 28 June 2012 (has links)
A parallel-type independently controllable transmission mechanism (PT-ICT) comprises of two planetary gear trains and two transmission-connecting members. It also includes an input shaft connecting to the input power source, a controller shaft connecting to the controller, an output shaft connecting to the output end, and a free-transmission end connecting to a secondary input source or output end. The controller can independently manipulate the transmitted output speed that is not affected by the variation of the Input speed. Adjusting the free-transmission¡¦s torque can reduce the power of the controller.
This study proposes a new structural arrangement of the PT-ICT, and a corresponding test-bed for kinematic and dynamic experiments is also constructed. It first analyzes the theoretical expressions of angular speeds, torques, and power flows introduced on each rotational shaft. And then for the purpose of verifying the validity of the analytical theoretical results, this study also builds a 3D model configuration with its prototype of the PT-ICT is also built to perform kinematic and dynamic experiments. It shows that experimental results are in agreement with the design values. It is expected that applying the proposed PT-ICT mechanism to wind turbines in a variable wind farm can achieve high quality electricity output, extend workable wind speed range, and have no need of using any frequency converters.
|
67 |
Emergencey Operation Strategy for Power System Restoration with Artificial Neural Network and Grey Relational AnalysisChen, Chine-Ming 23 January 2006 (has links)
Power system protection is important for service reliability and quality assurance. Various faults may occur due to natural and artificial calamity. Dispatchers are use the changed statuses of protection devices from the Supervisory Control and Data Acquisition (SCADA) system to identify the fault. To reduce the outage duration and promptly restore power services, fault section detection has to be done effectively and accurately with fault alarms.
In this thesis, artificial neural networks (ANN) and Grey Relational Analysis (GRA) are used to develop the restoration schemes for emergency operation in a power system including fault section detection (FSD), restoration strategy(RS), and voltage correction(VC). The optimal power flow (OPF) is responsible for verifying the proposed schemes by off-line analysis. With a IEEE 30-Bus power system, computer simulations were conducted to show the effectiveness of the proposed restoration schemes.
|
68 |
Continuation Power Flow And Voltage Stability In Power SystemsKeskin, Mehmet B. 01 September 2007 (has links) (PDF)
This thesis investigates an important power system phenomenon, voltage stability, by using continuation power flow method. Voltage collapse scenario is presented which can be a serious result of voltage instability and the parameters that affect voltage collapse are discussed.
In analyzing power system voltage stability, continuation power flow method is utilized which consists of successive load flows. This method is applied to a sample test system and Turkish Power System and load-voltage curves for several buses are obtained.
|
69 |
Study of Two-Objective Dynamic Power Dispatch Problem by Particle Swarm OptimizationChen, Yi-Sheng 12 June 2009 (has links)
In recent years, the awareness of environmental protection has made the power dispatch model no longer purely economical-oriented. This thesis proposed the application of particle swarm optimization (PSO) algorithm and interactive compromise programming method to solve the 24-hour two-objective power dispatch problem. Considering simultaneously the lowest generating cost and the lowest pollution emission, the two mutually-conflicting objectives will choose a compromised dispatch model. This thesis joined the mixed-integer programming problem of optimal power flow (MIOPF) with the dynamic economic dispatch (DED), making this dispatch solution more realistic without electrical violations; The MIOPF considers both continuous and discrete types of variables. The continuous variables are the generating unit real power output and the generator-bus voltage magnitudes; the discrete variables are the shunt capacitor banks and transformer tap setting. Simulation were run on the standard IEEE 30 Bus system. In order to avoid the PSO local optimality problem, this thesis proposed the utilization of the PSO algorithm with time-varying acceleration coefficients (PSO_TVAC) plus the local random search method (LRS), so it can quickly and effectively reach the optimal solution, without advantages of performance and accuracy of PSO. This thesis also proposed the consideration of the available transfer capability (ATC) on transmission lines of the existing dispatch model. Applying sensitivity factors to calculate each generator¡¦s available transfer capability that can be offered in the analyzed time interval, enables the creation of a new constraint. Joined with the dynamic economic dispatch problem, it will make possible that a load client wishes to raise its demand. Simultaneously taking care of the minimum cost and the limits of system security, better dispatch results could be expected.
|
70 |
Dynamic control of grid power flow using controllable network transformersDas, Debrup 19 December 2011 (has links)
The objective of the research is to develop a cost-effective, dynamic grid controller called the controllable network transformer (CNT) that can be implemented by augmenting existing load tap changing (LTC) transformers with an AC-AC converter. The concept is based on using a fractionally rated direct AC-AC converter to control the power through an existing passive LTC. By using a modulation strategy based on virtual quadrature sources (VQS), it is possible to control both the magnitude and the phase angle of the output voltage of the CNT without having any inter-phase connections. The CNT architecture has many advantages over existing power flow controllers, like absence of low frequency storage, fractional converter rating, retro-fitting existing assets and independent per-phase operation making it potentially attractive for utility applications.
The independent control of the magnitude and the phase angle of the output voltage allow independent real and reactive power flow control through the CNT-controlled line. In a meshed network with asymmetric network stresses this functionality can be used to redirect power from critically loaded assets to other relatively under-utilized parallel paths. The power flow controllability of CNT can thus be used to lower the overall cost of generation of power. The solid state switches in the CNT with fast response capability enable incorporation of various additional critical functionalities like grid fault ride through, bypassing internal faults and dynamic damping. This bouquet of features makes the CNT useful under both steady state and transient conditions without compromising the grid reliability.
|
Page generated in 0.0615 seconds