Electricity construction is required for a country¡¦s fundamental economic development. It provides the needed power and plays an important role in modern society. In order to develop sufficient electricity, Taiwan government has launched a construction project in the whole country starting from the year of 2004. The thermal power station is the major source of electricity in Taiwan and will take long time to construct. Based on the guidelines of Executive Yuan¡¥s Public Construction Commission, the construction shall focus on material management system; coordinate, monitor and examine the project; review by routine and check on site; integrate technology and experts from the production field to raise the execution effect and process quality. Alteration of thermal power station consists of generating set and supportive equipment. The construction methodology will determine if the construction can or not be completed on time. With reference by managerial and operational scopes of some enterprises, this thesis sets up Architecture-Oriented Thermal Power Station Alteration Affairs Management Model, abbreviated as AOTPSAAMM, to describe the whole picture for the thermal power station alteration project and further to achieve the aims on controlling schedule and raising knowledge management. AOTPSAAMM contains the architecture of thermal power station alteration construction. It not only describes the coalescence of organizational structure and organizational behavior in enterprise value chains, but also integrates with technology application systems. With duplicating and expanding capabilities, AOTPSAAMM will easily apply to other generating electricity system and create contemporary enterprise excellences.

Thesis (M. Soc. Sc.)--University of Hong Kong, 1989.

According to the Department of Water Affairs (DWAF, 2004 p.15), South Africa’s water resources are scarce and extremely limited and much of this precious resource is utilised and consumed in our industries. Treatment and re-use of effluent generated is, in some cases, preferred over use of alternate water resources (Du Plessis, 2008 p.3). The volume of effluent generated in treatment processes like ultra-filtration (UF) and reverse osmosis (RO) units is determined by the feed water quality, with high water loss through effluent generation at poor feed water quality. Current UF and RO applications require an increased UF production capacity due to the use of UF filtrate for periodic backwashing of the UF membrane units. This results in loss of water and decreases overall recovery. The need therefore exists to increase the overall recovery of product water from the raw water stream by reducing the amount of effluent generated. This would be possible to achieve by using RO brine to backwash the UF unit. The study was conducted to provide a modelling tool, assisting management to optimise the use of RO brine as backwash water on the UF system at the Medupi power station. The secondary objective of this study was the development of a modelling tool that can be used for other projects, new or existing, as a measure and indication of the usability of RO brine as backwash water on UF systems. By successfully applying this newly developed model, the viability of utilising the RO brine as backwash water for the UF was investigated. This modification would lead to utilizing smaller UF units than previously envisioned, which in turn leads to reducing capital cost with 11.07% and operating expenditure with 9.98% at the Medupi power station. This also has a positive environmental impact by reducing the amount of raw water used monthly by 10.34% (108 000 m3/month). / MIng (Development and Management Engineering), North-West University, Potchefstroom Campus, 2014

In line with its commitment to safe nuclear power generation, the Koeberg Nuclear Power Station (KNPS) replaced the outdated vibration monitoring system with a modern on-line vibration monitoring system. This will allow plant personnel to monitor components on a continuous basis which will provide faster response time in the scenario of excessive vibrations of the primary components. This study focuses on the analysis of the vibration of the primary components of the KNPS by analysing the frequency spectra of the vibration signals of the primary components and comparing these to reference signatures obtained during similar operating conditions. The condition of the vibration sensors will also be evaluated. In order to obtain a deeper understanding of the vibration behaviour and hence vibration signatures of the KNPS primary reactor components, a simplified mathematical model of the primary components is developed, based on the system of elasto-dynamic equations. The equations are solved numerically and used to simulate the KNPS vibration monitoring system. The mechanical system is modelled. Time series are generated and Fast Fourier Transforms (FFT) are calculated to simulate the new KNPS monitoring system. In the simulation mechanical degradation of the primary components as well as sensor degradation is simulated. The purpose of this study is to indicate whether mechanical degradation has occurred in the primary components of the plant and to validate the vibration signals. At the same time the study aims to lay a foundation for future monitoring and interpretation of vibration signatures by simulating the vibration and the monitoring signals. It was found that the primary components had not been affected by mechanical degradation as no deviations in resonances were detected in the frequency signatures. A small number of vibration sensors were found to have deteriorated; hence replacement / maintenance was proposed. The mechanical model and the simulation of the monitoring signals proved to be useful to understand and interpret the vibration of the KNPS primary components. / Thesis (M.Ing. (Nuclear Engineering))--North-West University, Potchefstroom Campus, 2011.

Effective and efficient operations management is the cornerstone of any company's success. Presently, because of cost-cutting pressures, all investors look out for companies' operations before making any investment commitment. The South African Government (through the Department of Public Enterprises), as an owner and investor in Eskom, is looking at optimising operational excellence within state-owned enterprises like Eskom. Eskom is presently experiencing problems with increased electricity consumption which it cannot meet due to the limited plant capacity it presently has. These challenges are forcing Eskom to be more efficient and effective in management of the present plant assets (like Matimba Power Station) it presently operates. Matimba Power Station has consistently shown improvement in the areas of plant, financial and operations performance over the last three years. It is presently the standard bearer for the whole Eskom in terms of plant and operational performance. Asset management (through maintenance and management thereof), especially preventative management with in a power utility like Eskom, is a critical factor because supply (generation of electricity) has to meet demand (consumption of electricity) instantaneously as electricity cannot be saved. The planning, scheduling and execution of maintenance (through a work management process) to ensure success of business operations are very critical. An Eskom document titled Routine Work Management Manual emphasised the criticality of preventative management and included a six-step process of work management within the power generation business. The Japanese success in ensuring that operations costs are limited by implementing total productive maintenance (which includes work management) is suggested in the study as a way to go for operational success at Matimba Power Station. Many of the research studies done at Eskom in regard to maintenance were based on and confined to a sampling population of senior staff members like managers, engineers and supervisors. Experience has shown that progress of implementing change (whether in systems or structures) is slow if there was no proactive involvement of all participants and stakeholders, especially employees at lower levels involved in operations. A work management process, which is one of the pillars of total productive maintenance, was recently implemented at Matimba and is currently experiencing teething problems which are being attended to. Employee involvement in making sure of the success of work management is critical. The study investigates the implementation of work management from the employees' perspective in order to address problems for possible full implementation of total productive maintenance. / Thesis (M.B.A.)--North-West University, Vaal Triangle Campus, 2010.

Effective and efficient operations management is the cornerstone of any company's success. Presently, because of cost-cutting pressures, all investors look out for companies' operations before making any investment commitment. The South African Government (through the Department of Public Enterprises), as an owner and investor in Eskom, is looking at optimising operational excellence within state-owned enterprises like Eskom. Eskom is presently experiencing problems with increased electricity consumption which it cannot meet due to the limited plant capacity it presently has. These challenges are forcing Eskom to be more efficient and effective in management of the present plant assets (like Matimba Power Station) it presently operates. Matimba Power Station has consistently shown improvement in the areas of plant, financial and operations performance over the last three years. It is presently the standard bearer for the whole Eskom in terms of plant and operational performance. Asset management (through maintenance and management thereof), especially preventative management with in a power utility like Eskom, is a critical factor because supply (generation of electricity) has to meet demand (consumption of electricity) instantaneously as electricity cannot be saved. The planning, scheduling and execution of maintenance (through a work management process) to ensure success of business operations are very critical. An Eskom document titled Routine Work Management Manual emphasised the criticality of preventative management and included a six-step process of work management within the power generation business. The Japanese success in ensuring that operations costs are limited by implementing total productive maintenance (which includes work management) is suggested in the study as a way to go for operational success at Matimba Power Station. Many of the research studies done at Eskom in regard to maintenance were based on and confined to a sampling population of senior staff members like managers, engineers and supervisors. Experience has shown that progress of implementing change (whether in systems or structures) is slow if there was no proactive involvement of all participants and stakeholders, especially employees at lower levels involved in operations. A work management process, which is one of the pillars of total productive maintenance, was recently implemented at Matimba and is currently experiencing teething problems which are being attended to. Employee involvement in making sure of the success of work management is critical. The study investigates the implementation of work management from the employees' perspective in order to address problems for possible full implementation of total productive maintenance. / Thesis (M.B.A.)--North-West University, Vaal Triangle Campus, 2010.

Frazil ice is a phenomenon that takes place in cold regions when the water of rivers, lakes or oceans is cooled under 0ºC. Several times during winter, frazil ice can appear at river Ätran, where Träbena hydropower plant is held by the company Wetterstad Consulting AB. Frazil ice particles contained in the flowing water are extremely sticky and adhere to any object placed in the water. Trash racks are used by the power plant at the water intakes to prevent any strange object to go into the turbines. However, frazil ice particles stick to the trash racks creating an ice blockage that interrupts the water inflow. In this situation, the power plant has to stop the production even for several months, due to the lack of water that reaches the turbines. In order to solve this problem, the company has installed a heating system on the trash racks that prevent the adhesion of frazil ice particles. This system is manually operated, and it is turned on or off based on the experience and predictions of the company. This heating system is very power consuming and every time it is turned on unnecessarily the company loses money. An automatic frazil ice detection system that turns on the heating system when needed is to be created. For that, several options have been analysed, and finally a capacitor-based sensor has been developed as a solution. The sensor consist of two steel plates coated with semi-transparent polycarbonate submerged underwater parallel placed in the space between the trash racks’ bars, forming this way a parallel plate capacitor. The capacitance of a capacitor depends exclusively on its geometry and the dielectric material between the plates. Hence when the water temperature is low enough, frazil ice particles stick to the plates of the capacitor and its capacitance will vary indicating that the accretion of frazil ice may block the water inflow. This variation is registered and a signal is send to the heating system to start operating. This way, the heating system is completely automated; no human intervention is needed at all. / <p>Developed for Wettestad Consulting AB.</p>

In line with its commitment to safe nuclear power generation, the Koeberg Nuclear Power Station (KNPS) replaced the outdated vibration monitoring system with a modern on-line vibration monitoring system. This will allow plant personnel to monitor components on a continuous basis which will provide faster response time in the scenario of excessive vibrations of the primary components. This study focuses on the analysis of the vibration of the primary components of the KNPS by analysing the frequency spectra of the vibration signals of the primary components and comparing these to reference signatures obtained during similar operating conditions. The condition of the vibration sensors will also be evaluated. In order to obtain a deeper understanding of the vibration behaviour and hence vibration signatures of the KNPS primary reactor components, a simplified mathematical model of the primary components is developed, based on the system of elasto-dynamic equations. The equations are solved numerically and used to simulate the KNPS vibration monitoring system. The mechanical system is modelled. Time series are generated and Fast Fourier Transforms (FFT) are calculated to simulate the new KNPS monitoring system. In the simulation mechanical degradation of the primary components as well as sensor degradation is simulated. The purpose of this study is to indicate whether mechanical degradation has occurred in the primary components of the plant and to validate the vibration signals. At the same time the study aims to lay a foundation for future monitoring and interpretation of vibration signatures by simulating the vibration and the monitoring signals. It was found that the primary components had not been affected by mechanical degradation as no deviations in resonances were detected in the frequency signatures. A small number of vibration sensors were found to have deteriorated; hence replacement / maintenance was proposed. The mechanical model and the simulation of the monitoring signals proved to be useful to understand and interpret the vibration of the KNPS primary components. / Thesis (M.Ing. (Nuclear Engineering))--North-West University, Potchefstroom Campus, 2011.

Thesis (M.Sc.) -- University of Adelaide, Department of Zoology, 1979.

Thesis (Ph. D.)--University of Hong Kong, 1988.