No description available.

No description available.

Integrally heated composite tooling (IHCT) is seen as a low cost alternative to autoclave manufacturing of polymer matrix composites (PMCs). IHCTs consist of a composite tool heated by surface heaters; temperature distribution is ensured by a thermally conductive metallic layer. The main original contributions of this thesis was the development of a new method for applying copper coatings onto carbon fibre/epoxy PMCs using pulsed gas dynamic spraying, the production of larger size samples, and the characterisation of the performance of the coatings and laminates obtained. It was shown that this method has potential for producing the thermally conductive layer in an IHCT. Another contribution was the characterisation of parameters affecting temperature distribution across IHCTs through heat transfer simulations, leading to guidelines for IHCT design.

Nano structured wide band gap semiconductors have attracted attention of many researchers due to their potential electronic and optoelectronic applications. In this thesis, we report successful synthesis of well aligned Eu doped ZnO nano-rods prepared, for the first time to our knowledge, by pulsed laser deposition (PLD) without any catalyst. X-ray diffraction (XRD) patterns shows that these Eu doped ZnO nanorods are grown along the c-axis of ZnO wurtzite structure. We have studied the effect of the PLD growth conditions on forming vertically aligned Eu doped ZnO nanorods. The structural properties of the material are investigated using a -scanning electron microscope (SEM). The PLD parameters must be carefully controlled in order to obtain c-axis oriented ZnO nanorods on sapphire substrates, without the use of any catalyst. The experiments conducted in order to identify the optimal growth conditions confirmed that, by adjusting the target-substrate distance, substrate temperature, laser energy and deposition duration, the nanorod size could be successfully controlled. Most importantly, the results indicated that the photoluminescence (PL) properties reflect the quality of the ZnO nanorods. These parameters can change the material’s structure from one-dimensional to two-dimensional however the laser energy and frequency affect the size and the height of the nanorods; the xygen pressure changes the density of the nanorods.

Zinc oxide (ZnO) semiconductors have been utilized by many researchers, due to its unique properties beneficial for functional devices. In particular, gadolinium (Gd)–doped ZnO exhibits high ferromagnetic and electrical properties, which is attributed to defect/impurity bands mediated by Gd dopants. In this dissertation, I study the effects of Gd concentration, oxygen pressure using pulsed laser deposition (PLD), and thermal annealing on the optical and structural properties of undoped and Gd-doped ZnO films and nanostructures. Moreover, as the growth of practical ZnO nanostructures-based devices without catalyst, while presently challenging, is highly important for many applications. Thus, for the first time, a novel method is developed for growing well aligned ZnO nanorods (NRs) by optimizing PLD conditions using Gd-doped ZnO target without any catalyst in a single step. This study shows that, both the lattice orientation of the substrate and the Gd characteristics are significant in enhancing the NR growth. Our findings reveal that precise control of the NR density can be achieved by changing the oxygen partial pressure. Furthermore, due to the Gd incorporation, these NRs possess favorable electrical properties with a significant mobility of 177 cm2 (V.s)-1 compared to that reported in literature. Nonetheless significant challenges need to be overcome to achieve reproducible and stable p-type ZnO for commercial applications. Hence, several attempts based on n-type ZnO grown on foreign p-type substrates were made to achieve high-performance devices and overcome the issues arising when p-type doped ZnO is employed. Moreover, Growth of ZnO nanostructures on a foreign p-type substrates does not require a lattice-matched p-type substrate. Thus, for the first time, PLD conditions are improved to grow high quality ZnO nanotubes (NTs) with high optical, structural and electrical properties on a p-type Si (100) substrate without catalyst for high-performance devices. A fabrication of high performance UV photodetector (PD) based on ZnO NT/p-Si is demonstrated with superior responsivity (up to ~ 101.2 AW-1) compared to that reported in literature. This new and simple method demonstrates that the PLD system has a significant potential for improving the performance of materials used in a wide range of electronic and optoelectronic applications.

Title: Characterization and focusing of capillary-discharge XUV-laser beam for purposes of thin-film deposition Author: Peter Pira Department: Department of Surface and Plasma Science Supervisor: doc. RNDr. Jan Wild, CSc., Department of Surface and Plasma Science Abstract: The paper deals with the first results of the interaction of a desk-top high repetition rate XUV laser (wavelength of 46.9 nm) radiation with materials suitable for optoelectronics, in particular the ionic crystals CsI, LiF, etc. Using surface physics methods (AFM, DIC Normanski microscopy) pulse laser imprints were investigated. Based on the results obtained, general information on the nature of ablation and desorption was obtained, which were compared with the results of the XUV-ABLATOR modified code modeling. Plasma arising from ablation was examined by a modified Langmuir probe system. The main result is the pulse laser deposition of thin films of Bi and CsI. Keywords: ablation, Pulsed Laser Deposition, XUV laser

As the world strives to adapt to the increasing demand for electrical power, sustainable energy sources are attracting significant interest. Around 60% of energy utilized in the world is wasted as heat. Different industrial processes, home heating, and exhausts in cars, all generate a huge amount of unused waste heat. With such a huge potential, there is also significant interest in discovering inexpensive technologies for power generation from waste heat. As a result, thermoelectric materials have become important for many renewable energy research programs. While significant advancements have been done in improving the thermoelectric properties of the conventional heavy-element based materials (such as Bi2Te3 and PbTe), high-temperature applications of thermoelectrics are still limited to one materials system, namely SiGe, since the traditional thermoelectric materials degrade and oxidize at high temperature. Therefore, oxide thermoelectrics emerge as a promising class of materials since they can operate athigher temperatures and in harsher environments compared to non-oxide thermoelectrics. Furthermore, oxides are abundant and friendly to the environment. Among oxides, crystalline SrTiO3 and ZnO are promising thermoelectric materials. The main objective of this work is therefore to pursue focused investigations of SrTiO3 and ZnO thin films and superlattices grown by pulsed laser deposition (PLD), with the goal of optimizing their thermoelectric properties by following different strategies. First, the effect of laser fluence on the thermoelectric properties of La doped epitaxial SrTiO3 films is discussed. Films grown at higher laser fluences exhibit better thermoelectric performance. Second, the role of crystal orientation in determining the thermoelectric properties of epitaxial Al doped ZnO (AZO) films is explained. Vertically aligned (c-axis) AZO films have superior thermoelectric properties compared to other films with different crystal orientations. Third, additional B-site doping of A-site doped SrTiO3 films leads to a prominent reduction in the lattice thermal conductivity without limiting the electrical transport, and hence an improvement in the figure of merit is noticed. Fourth and last, the enhancement of thermoelectric properties of thermally robust, high quality SrTiO3-based superlattices is discussed. Beside the randomly distributed oxygen vacancies and extrinsic dopants, the structure of SrTiO3-based superlattices increases the scattering of phonons at the interfaces between the alternative layers, and hence reducing the thermal conductivity, which leads to a notable enhancement in the figure of merit.

>Magister Scientiae - MSc / When the spacecrafts orbit in space, it is subjected to significant thermal cycling variation. Thermal regulation of the spacecraft temperature is required to ensure a good operation of the small crafts such as CubeSats and the on-board equipment while minimizing the weight. Three methods employed for the Smart Radiator Devices (SRD) are (i) mechanical louvers, (ii) electrochromic coatings and (iii) thermochromic coatings (which is of interest in this study). Based on the characteristics of the thermochromic coatings, the passive smart radiator device is by far the most efficient option since there are no mechanical moving components and also no electric energy needed for the craft to operate.

Pulsed lasers are studied as new tools to realize competitive nanomanufacturing. The capabilities of pulsed lasers as promising tools for research, design, manufacturing, and control rely on the flexibility due to the great variety of operation parameters, and the inherent precision in aspects of time, spatial resolution, and energy input. As new tools, the fundamental understanding and technological capabilities of pulsed laser-induced chemical synthesis were explored in this dissertation research. In order to study the capabilities of pulsed laser in controlled synthesis, a thermal model was developed to predict the local temperature change due to the very short period of irradiation by a pulsed laser. And combining with the classical Gibbs free energy theories, a set of guidelines were developed for precision control for pulsed laser-induced chemical synthesis. Zinc oxide crystals were studied as an example case, showing the relationship between the wide range variables of pulsed laser including repetition rate, energy area density, power density, irradiation duration, etc. and the material structures of deposited crystals in aspects of crystal density, size, shape, crystalline properties, surface morphologies, growth rate, etc. Mechanisms from thermodynamic and kinetic aspects were explored. Pulsed laser-induced different heating conditions were found to separate two crystallization processes with different energy barriers, one dominated by a burst of nucleation and the other dominated by crystal growth through particle aggregation. For the study of the fundamental mechanisms in crystallization, pulsed laser initiated and controlled the crystallization in its early stage, and the crystal evolution were observed and analyzed by transmission electron microscopy (TEM). Crystal growth from intermediate monomers was first studied by an electron beam under the condition without precursor solution environment, providing crucial process information of crystal evolution, indicating multistage processes by continuous mass and phase transfer among intermediate monomers. This dissertation shows the capabilities of pulsed laser in realizing precision control for the targeted synthesis in nanomanufacturing, providing unique insight to crystallization mechanisms, and extending prospects to scientific research of other energy beam induced processes.

B-Ga2O3 is one of the emerging semiconductor materials with high breakdown field strength (~ 8 MV/cm) and ultrawide-bandgap (UWBG) 4.9 eV. Therefore, B-Ga2O3 and related compound semiconductors are ideal for power electronics and deep/vacuum ultraviolet-wavelength photodetector applications. High-crystal-quality B-Ga2O3 semiconductor materials epitaxially deposited on the various substrate are prerequisites for realizing any practical application. However, it is still challenging to grow high-crystal-quality V-Ga2O3 layer and to integrate B-Ga2O3 with other semiconductor materials by direct epitaxy. Understanding the epitaxial relationship of the integrated oxide heterostructure and the substrate used helps to shed light on the feasibility of heterojunctions formation for photonic applications, such as the ultraviolet-wavelength photodetectors developed in this thesis. By optimizing pulsed laser deposition (PLD) conditions, such as laser energy, ambient gas, pressure, etc., a single-crystalline oxide heterostructure were successfully integrated into a photonic platform. This included p-NiO/n-B-Ga2O3/a-Al2O3, B-Ga2O3/y-In2O3/a-Al2O3, and B-Ga2O3/TiN/MgO structures. The epitaxial thin film crystallographic and chemical properties were investigated by different characterization techniques. The high-resolution X-ray diffraction (HRXRD) was applied to study the heterostructures’ epitaxial orientation relationship by out-of-plane XRD w-2θ-scan and asymmetric skew ɸ-scan. The lattice-mismatch at the heterostructure interfaces were examined and the crystal quality of the epitaxial thin films were measured by means of full-width at half-maximum (FWHM) fitting. Scanning-TEM energy-dispersive X-ray spectroscopy (STEM-EDX) was applied to qualitatively study the chemical elements’ spatial distribution. Rutherford backscattering spectroscopy (RBS) was applied to study the epitaxial thin film chemical composition, material stoichiometry, and inter-diffusion. The X-ray photoelectron spectroscopy (XPS) was applied to study the conduction and valence band offsets which is essential to determine the types of heterostructures formed. Finally, the p-NiO/n-B-Ga2O3/a-Al2O3 B-Ga2O3/y-In2O3/a-Al2O3, and B-Ga2O3/TiN/MgO epitaxial thin-film were fabricated into ultraviolet-wavelength photodetectors. The wavelength-dependent and power-dependent characterizations were applied to measure the cut-off wavelength and the peak responsivity. The time response characterization was applied to measure the photodetectors’ responses to pulse signals, and the rise and decay times were fitted by a double exponential function.