The Tom's Creek Bridge is a small-scale demonstration project involving the use of fiber-reinforced polymer (FRP) composite girders as the main load carrying members. The project is intended to serve two purposes. First, by calculating bridge design parameters such as the dynamic load allowance, transverse wheel load distribution and deflections under service loading, the Tom's Creek Bridge will aid in modifying current AASHTO bridge design standards for use with FRP composite materials. Second, by evaluating the FRP girders after being exposed to service conditions, the project will begin to answer questions about the long-term performance of these advanced composite material beams when used in bridge design. This thesis details the In-Service analysis of the Tom's Creek Bridge. Five load tests, at six month intervals, were conducted on the bridge. Using mid-span strain and deflection data gathered from the FRP composite girders during these tests the above mentioned bridge design parameters have been determined. The Tom's Creek Bridge was determined to have a dynamic load allowance, IM, of 0.90, a transverse wheel load distribution factor, g, of 0.101 and a maximum deflection of L/488. Two bridge girders were removed from the Tom's Creek Bridge after fifteen months of service loading. These FRP composite girders were tested at the Structures and Materials Research Laboratory at Virginia Tech for stiffness and ultimate strength and compared to pre-service values for the same beams. This analysis indicates that after fifteen months of service, the FRP composite girders have not lost a significant amount of either stiffness or ultimate strength. / Master of Science

The Route 601 Bridge in Sugar Grove, Virginia spans 39 ft over Dickey Creek. The Bridge is the first to use the Strongwell 36 in. fiber reinforced polymer (FRP) double web beam (DWB) in its superstructure. Replacement of the old bridge began in June 2001, and construction of the new bridge was completed in October 2001. The bridge was field tested in October 2001 and June 2002. This thesis details the field evaluation of the Rt. 601 Bridge. Using mid span deflection and strain data from the October 2001 and June 2002 field tests, the primary goal of this research was to determine the following AASHTO bridge design parameters: wheel load distribution factor g, dynamic load allowance IM, and maximum deflection. The wheel load distribution factor was determined to be S/5, a dynamic load allowance was determined to be 0.30, and the maximum deflection of the bridge was L/1500. Deflection results were lower than the AASHTO L/800 limit. This discrepancy is attributed to partial composite action of the deck-to-girder connections, bearing restraint at the supports, and contribution of guardrail stiffness. Secondary goals of this research were to quantify the effect of diaphragm removal on girder distribution factor, determine torsion and axial effects of the FRP girders, compare responses to multiple lane symmetrical loading to superimposed single lane response, and compare the field test results to a finite element and a finite difference model. It was found that diaphragm removal had a small effect on the wheel load distribution factor. Torsional and axial effects were small. The bridge response to multilane loading coincided with superimposed single lane truck passes, and curb-stiffening effects in a finite difference model improved the accuracy of modeling the Rt. 601 Bridge behavior. / Master of Science

The Route 601 Bridge spans 39 ft over Dickey Creek in Sugar Grove, VA and represents the first use of Strongwell's 36 in. double web beam (DWB) as the main load carrying members for a traffic bridge. The bridge was designed for AASHTO HS20-44 and AASHTO alternate military loading with a targeted deflection limit of L/800. For the preliminary design, conservative properties for the 36 in. DWB were assumed based on experience at Virginia Tech with Strongwell's 8 in. DWB used in the Tom's Creek Bridge. An elastic modulus (E) of 6,000 ksi and a shear stiffness (kGA) of 20,000 ksi-in2 were assumed and used with Timoshenko shear deformable beam theory to characterize the beams and determine the deflections. This thesis details the experimental work conducted in conjunction with the design of the Route 601 Bridge, which had two goals. First, a deck-to-girder connection was tested to determine if a bolted connection could develop composite action between the girder and the deck. This connection was shown to provide a significant amount of composite action when used with the 8 in. DWB and a composite deck, but little or no composite action when used with the 36 in. DWB and a glue-laminated timber deck. Second, eleven 36 in. DWB's were tested to determine their stiffness properties (EI and kGA) to insure that these properties were above the values assumed in the preliminary design, and all the beams had stiffness properties that were close to or above the assumed values. The eleven beams were also proof tested to a moment equivalent to five times the service load moment to insure the safety of the Route 601 Bridge, and one beam was tested to failure to determine the failure mode and residual stiffness of the 36 in. DWB. Finally, based on these results eight beams were chosen for the Route 601 Bridge. / Master of Science