11 |
Seismic evaluation of traditional timber structures in TaiwanTsai, Pin-Hui January 2009 (has links)
Taiwan is located in a highly seismic zone and the historical “Dieh-Dou” timber buildings, constructed without following any code or standard, are prone to collapse under earthquake. These buildings are unique and represent the culture, heritage and art of Taiwan, therefore need to be preserved while minimizing unnecessary intervention that could damage their authenticity. <br /> This research comprises a thorough investigation on the parameters influencing the seismic vulnerability of the Dieh-Dou timber frames in Taiwan, and propose a methodology of assessment and a strategy for strengthening validated through experimental testing and numerical analysis. <br /> After review existing literature and post-earthquake surveys, the failure modes of the buildings are identified, showing that the dislocation of the elements of the frame from the joints is the primary source of damage. An experimental investigation is carried out comprising both rotational and translational tests on full scale joint specimens which, together with a parametric study undertaken with an appropriate FE simulation, demonstrates how both the rotational and translational stiffness of the joints play a key role in defining the behaviour of these structures. <br /> Lateral force, response spectrum, and step-by-step pushover analyses are performed and compared with the post-earthquake survey of two Dieh-Dou buildings seriously affected by the 1999 Chi-Chi earthquake. The results show that the proposed FE modelling can successfully be employed to assess the vulnerability of the frames. <br /> Based on a damage level approach, an assessment methodology is suggested that would allow to optimisation of the strengthening strategy, permitting protection these precious structures from future earthquakes while avoiding unnecessary interventions.
|
12 |
Aplicação e comparação de métodos "pushover" de análise sísmica de estruturas de edifíciosMota, Marcelo António Magalhães January 2010 (has links)
Tese de mestrado integrado. Engenharia Civil. Faculdade de Engenharia. Universidade do Porto. 2010
|
13 |
Progressive Collapse: Comparison of Main Standards, Formulation and Validation of New Computational ProceduresMenchel, Kfir 29 October 2008 (has links)
Throughout recent history, famous records of building failures may be found, unfortunately accompanied by great human loss and major economic consequences. One of the mechanisms of failure is referred to as ‘progressive collapse’: one or several structural members suddenly fail, whatever the cause (accident or attack). The building then collapses progressively, every load redistribution causing the failure of other structural elements, until the complete failure of the building or of a major part of it. The civil engineering community’s attention to this type of event was first drawn by the progressive collapse of the building called Ronan Point, following a gas explosion in one of the last floors. Different simplified procedures for simulating the effects of progressive collapse can now be found in the literature, some of them described in detail. However, no extensive study can be found, in which these procedures are compared to more complete approaches for progressive collapse simulation, aiming at the comparison of the assumptions underlying them. To further contribute to the elaboration of design codes for progressive collapse, such a study would therefore be of great interest for practitioners.
All parties involved with the subject of progressive collapse are currently attempting to bridge the gap between the work done on the research front on the one hand, what can be considered as a fitting numerical model for regular industrial use on the other, and finally, the normalisation committees. The present research work aims at providing insight as to how the gaps between these poles may be reduced. The approach consists in studying the various hypotheses one by one, and gradually adding complexities to the numerical model, if they prove to be warranted by the need for sufficient accuracy. One of the contributions of the present work stems from this approach, in that it provides insight regarding the validity of the various simplifying assumptions. It also leads to the development of procedures which are kept as simple as possible, in an attempt to design them as best as possible for regular industrial use.
The objective of simplifying assumptions validation is pursued in Chapter 2. This chapter consists of the text of a paper entitled “Comparison and study of different progressive collapse simulation techniques for RC structures”, in which the main simplifying assumptions of the progressive collapse guidelines are detailed and assessed. The DoD [1] and GSA [2] static linear and non-linear procedures are investigated, and compared to more complete approaches in order to assess their validity.
In the next two chapters, two new procedures for design against progressive collapse are developed. They are based on quasi-static computations, their main objective being to account accurately for dynamic inertial effects. The first of these chapters consists in the text of a paper entitled “A new pushover analysis procedure for structural progressive collapse based on a kinetic energy criterion”, in which energetic considerations allow for the development of a static equivalent pushover procedure. The second chapter consists of the text of a paper entitled “A new pushover analysis procedure for structural progressive collapse based on optimised load amplification factors”, which uses load amplification factors resulting from optimisation procedures in order to account for dynamic inertial effects. The contributions of these two papers lie in the fact that they offer an improved accuracy on the results, when compared with other procedure available in the literature, which follow the same general principles. The two proposed procedures are thoroughly validated by systematic comparisons with results obtained with the more costly dynamic non-linear computations.
Finally, an additional chapter focuses on the various approaches that can be adopted for the simulation of reinforced concrete beams and columns. Because a rather simple model for reinforced concrete is used in Chapter 2, the bulk of this chapter consists in the implementation of a more complex fibre-based non-linear beam element. Comparisons performed with this model provide insight to the limitations of the simpler model, which is based on the use of lumped plastic hinges, but show this simpler model to be valid for the purposes of the present work.
|
14 |
Influence Of Idealized Pushover Curves On Seismic ResponseKadas, Koray 01 September 2006 (has links) (PDF)
Contemporary approach performance based engineering generally relies on the approximate procedures that are based on the use of capacity curve derived from pushover analysis. The most important parameter in the displacement-based approach is the inelastic displacement demand computed under a given seismic effect and the most common procedures employed for this estimation / the Capacity Spectrum Method and the Displacement Coefficient Method are based on bi-linearization of the capacity curve. Although there are some recommendations for this approximation, there is a vital need for rational guidelines towards the selection of the most appropriate method among several alternatives.
A comprehensive research has been undertaken to evaluate the influence of several existing alternatives used for approximating the capacity curve on seismic demands. A number of frames were analyzed under a set of 100 ground motions employing OpenSees. In addition, the pushover curves obtained from nonlinear static analyses were approximated using several alternatives and the resulting curves were assigned as the force-deformation relationships of corresponding equivalent single-degree-of-freedom systems. These simplified systems were later analyzed to compute the approximate seismic response parameters.
Using the results of the complex and simplified analyses, the performance of each approximation method was evaluated in estimating the & / #8216 / exact& / #8217 / inelastic deformations of the multi-degree-of-freedom systems at various degrees of inelasticity. Dependency of the errors on ductility, strength reduction factor and period was also investigated. The interpretations made and the conclusions drawn in this study is believed to clarify the rationality and accuracy of selecting the appropriate idealization of the capacity curve.
|
15 |
Generalized Pushover AnalysisAlici, Firat Soner 01 June 2012 (has links) (PDF)
Nonlinear response history analysis is considered as the most accurate analytical tool for estimating seismic response. However, there are several shortcomings in the application of nonlinear response history analysis, resulting from its complexity. Accordingly, simpler approximate nonlinear analysis procedures are preferred in practice. These procedures are called nonlinear static analysis or pushover analysis in general. The recently developed Generalized Pushover Analysis (GPA) is one of them. In this thesis study, GPA is presented and evaluated comparatively with the nonlinear time history analysis and modal pushover analysis. A generalized pushover analysis procedure was developed for estimating the inelastic seismic response of structures under earthquake ground excitations (Sucuoglu and Gü / nay, 2011). In this procedure, different load vectors are applied separately to the structure in the incremental form until the predefined seismic demand is obtained for each force vector. These force vectors are named as generalized force vectors. A generalized force vector is a combination of modal forces, and simulates the instantaneous force distribution on the system when a given response parameter reaches its maximum value during the dynamic response. In this method, the maximum interstory drift parameters are selected as target demand parameters and used for the derivation of generalized force vectors. The maximum value of any other response parameter is then obtained from the analysis results of each generalized force vector. In this way, this procedure does do not suffer from the statistical combination of inelastic modal responses.
It is further shown in this study that the results obtained by using the mean spectrum of a set of ground motions are almost identical to the mean of the results obtained from separate generalized pushover analyses under each ground motion in the set. These results are also very close to the mean results of nonlinear response history analyses.
A practical implementation of the proposed generalized pushover analysis is also developed in this thesis study where the number of pushovers is reduced in view of the number of significant modes contributing to seismic response. It has been demonstrated that the reduced generalized pushover analysis is equally successful in estimating maximum member deformations and member forces as the full GPA under a ground excitation, and sufficiently accurate with reference to nonlinear response history analysis.
|
16 |
Generalized Pushover Analysis For Unsymmetrical-plan BuildingsKaatsiz, Kaan 01 July 2012 (has links) (PDF)
Nonlinear response history analysis is regarded as the most accurate analysis procedure for estimating seismic response. Approximate analysis procedures are also available for the determination of seismic response and they are preferred over nonlinear response history analysis since much less computational effort is required and good response prediction is achieved by employing rather simple concepts. A generalized pushover analysis procedure is developed in this thesis study as an approximate analysis tool for estimating the inelastic seismic response of structures under earthquake ground excitations. The procedure consists of applying generalized force vectors to the structure in an incremental form until a prescribed target interstory drift demand is achieved. Corresponding generalized force vectors are derived according to this target drift parameter and include the contribution of all modes. Unlike many approximate analysis procedures, response of the structure is directly obtained from generalized pushover analysis results without employing a modal combination rule, eliminating the errors cultivating from these methods. Compared to nonlinear response history analysis, generalized pushover analysis is less demanding in computational effort and its implementation is simpler relative to other approximate analysis procedures. It is observed that the proposed analysis procedure yields results accurately in comparison to the other nonlinear pushover analysis methods. Accordingly it can be suggested as a convenient and sound analysis tool.
|
17 |
Software Development For R/c Building Vulnerability Index And Member Importance CalculationOksuz, Arif 01 April 2004 (has links) (PDF)
SOFTWARE DEVELOPMENT FOR
R/C BUILDING VULNERABILITY INDEX
AND MEMBER IMPORTANCE CALCULATION
Turkey has many active faults which have the potential to generate large
earthquakes. Recent earthquakes showed that the buildings in Turkey are not well
designed and vulnerable to earthquakes. Previous studies on the subject showed
that many structures in Turkey need to be strengthened before the next major
earthquake to minimize property loss and casualties.
A number of fast and approximate (mostly empirical) methods have been
developed in the past to process large building stock. However, there are some
important and special structures that do not fit with the general building stock and
needs special consideration (e.g., disaster management center, governmental
buildings, hospitals, tall structures, etc.). This study targets to evaluate those
important and special structures in a detailed, fast, and correct manner. The
developed software, which constitutes an important part of this study, does process
the building information several times to determine member-based importance
factors. The vulnerability index of the building will be determined using the importance of each load-carrying member and how much each member is forced
with respect to its capacity.
In order to augment user perception, a functional graphical user-interface is
designed. Software is equipped with modules that generate input files for SAP2000
analysis program, conduct dynamic and static analysis automatically, and postprocess
the generated analysis results which enable the engineer to make a
decision on the vulnerability of the structure. Program is written in C++, using
object-oriented programming technique.
The main difference between this and similar studies is the generator
program which automatically generates 3D-FE models and post-processes nonlinear
analysis results for an effective decision mechanism. In this way, more
realistic results can be obtained much faster.
As future studies, new routines are planned to be implemented to the
graphical user interface of the program which will suggest smart and engineered
retrofit/strengthening alternatives to the user.
|
18 |
Seismic performance of reinforced concrete frames.Kashyap, Jaya January 2009 (has links)
Many intra-tectonic plate regions are considered to have low to moderate seismic risk. However, devastating earthquakes can occur in these regions and result in high consequences in terms of casualties and damage. Non-ductile detailing practice employed in these structures make them prone to potential damage and failure during an earthquake. Furthermore, the use of infill walls is a divisive issue as on positive side dual wall-frame systems have beneficial effects related to strength, stiffness, and ductility. However, if not designed properly infill wall can also lead to undesirable structural failures of complete wall frame system. Although, there has been significant amount of international research in this area, it is worth noting that very little research exists for Australian frames. This thesis presents the experimental and analytical research conducted at The University of Adelaide to gain some insight into the behaviour of typically detailed Australian reinforced concrete frames subjected to ground motions. The main objectives of this research were (1) to investigate the behaviour of non-seismically designed reinforced concrete frames under a 500-YRP earthquake; (2) to determine the different magnitudes of earthquake (YRP) that are likely to cause excessive drifts in or collapse of gravity-load-designed reinforced concrete frames and (3) to investigate the effect of infill walls on the moment-resisting frames subjected to seismic loads. The experimental program consisted of earthquake simulation tests on a 1/5 scale model of a 3-storey reinforced concrete frame and four ½-scale reinforced concrete brick infilled frame specimens subjected to quasi-static cyclic loading. The analytical study included static pushover and non-linear dynamic analyses of the 3-, 5- and 12-storey reinforced concrete frames. From the overall performance of gravity-load-designed bare reinforced concrete frames considered in this study, it was concluded that the non-seismically designed frames appear to be capable of resisting a “design magnitude earthquake” (i.e., 500- YRP) in low earthquake hazard regions. However, their behaviour under more severe earthquakes (e.g. a 2500-YRP earthquake) is questionable. Perhaps the earthquake design requirements should consider as an alternative the ‘collapse prevention’ limit state for longer return period earthquakes, of the order of 2000–2500-YRP. The experimental research on reinforced concrete infilled frame indicated that the infill wall does not adversely effect the in plane ultimate strength, stiffness, and ductility of the bare reinforced concrete frame. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1372229 / Thesis (M.Eng.Sc.) - University of Adelaide, School of Civil, Environmental and Mining Engineering, 2009
|
19 |
Estudio de los modos de falla para estanques de acero mediante análisis de elementos finitosRuiz Osorio, Sebastián Matías January 2016 (has links)
Ingeniero Civil / Debido a la sismicidad nacional y la importancia económica de la industria vitivinícola chilena nace la necesidad de estudiar el comportamiento estructural de los estanques de almacenamiento de acero frente a una solicitación sísmica.
En la presente memoria se modelan 2 estanques con dimensiones geométricas diferentes a través del programa de elementos finitos ANSYS versión 15. Se realiza un análisis no-lineal estático del tipo pushover variando la condición de borde para ambos tipos de estanque. De los modelos analizados se extraen las curvas de capacidad, los modos de falla y la distribución de tensiones principales y equivalentes (o tensión de Von-Mises). Los resultados entregados por el programa se comparan con las cargas y fuerzas de diseño obtenidas de las normas y guías de cálculo.
Luego de procesar los resultados se concluye que
-El programa logra modelar de buena forma el comportamiento estructural de los estanques obteniendo los modos de falla observados en terreno
-La condición de borde del estanque incide en el modo de falla visualizado en el manto
-Los estanques simplemente apoyados muestran un pobre desempeño. Su capacidad máxima se encuentra por debajo del corte basal de diseño.
|
20 |
Seismic Vulnerability Assessment of a Shallow Two-Story Underground RC Box StructureHuh, Jungwon, Tran, Quang, Haldar, Achintya, Park, Innjoon, Ahn, Jin-Hee 18 July 2017 (has links)
Tunnels, culverts, and subway stations are the main parts of an integrated infrastructure system. Most of them are constructed by the cut-and-cover method at shallow depths (mainly lower than 30 m) of soil deposits, where large-scale seismic ground deformation can occur with lower stiffness and strength of the soil. Therefore, the transverse racking deformation (one of the major seismic ground deformation) due to soil shear deformations should be included in the seismic design of underground structures using cost- and time-efficient methods that can achieve robustness of design and are easily understood by engineers. This paper aims to develop a simplified but comprehensive approach relating to vulnerability assessment in the form of fragility curves on a shallow two-story reinforced concrete underground box structure constructed in a highly-weathered soil. In addition, a comparison of the results of earthquakes per peak ground acceleration (PGA) is conducted to determine the effective and appropriate number for cost- and time-benefit analysis. The ground response acceleration method for buried structures (GRAMBS) is used to analyze the behavior of the structure subjected to transverse seismic loading under quasi-static conditions. Furthermore, the damage states that indicate the exceedance level of the structural strength capacity are described by the results of nonlinear static analyses (or so-called pushover analyses). The Latin hypercube sampling technique is employed to consider the uncertainties associated with the material properties and concrete cover owing to the variation in construction conditions. Finally, a large number of artificial ground shakings satisfying the design spectrum are generated in order to develop the seismic fragility curves based on the defined damage states. It is worth noting that the number of ground motions per PGA, which is equal to or larger than 20, is a reasonable value to perform a structural analysis that produces satisfactory fragility curves.
|
Page generated in 0.0619 seconds