1 |
System design of the MeerKAT L - band 3D radar for monitoring near earth objectsAgaba, Doreen January 2017 (has links)
This thesis investigates the current knowledge of small space debris (diameter less than 10 cm) and potentially hazardous asteroids (PHA) by the use of radar systems. It clearly identifies the challenges involved in detecting and tracking of small space debris and PHAs. The most significant challenges include: difficulty in tracking small space debris due to orbital instability and reduced radar cross-section (RCS), errors in some existing data sets, the lack of dedicated or contributing instruments in the Southern Hemisphere, and the large cost involved in building a high-performance radar for this purpose. This thesis investigates the cooperative use of the KAT-7 (7 antennas) and MeerKAT (64 antennas) radio telescope receivers in a radar system to improve monitoring of small debris and PHAs was investigated using theory and simulations, as a cost-effective solution. Parameters for a low cost and high-performance radar were chosen, based on the receiver digital back-end. Data from such radars will be used to add to existing catalogues thereby creating a constantly updated database of near Earth objects and bridging the data gap that is currently being filled by mathematical models. Based on literature and system requirements, quasi-monostatic, bistatic, multistatic, single input multiple output (SIMO) radar configurations were proposed for radio telescope arrays in detecting, tracking and imaging small space debris in the low Earth orbit (LEO) and PHAs. The maximum dwell time possible for the radar geometry was found to be 30 seconds, with coherent integration limitations of 2 ms and 121 ms for accelerating and non-accelerating targets, respectively. The multistatic and SIMO radar configurations showed sufficient detection (SNR 13 dB) for small debris and quasi-monostatic configuration for PHAs. Radar detection, tracking and imaging (ISAR) simulations were compared to theory and ambiguities in range and Doppler were compensated for. The main contribution made by this work is a system design for a high performance, cost effective 3D radar that uses the KAT-7 and MeerKAT radio telescope receivers in a commensal manner. Comparing theory and simulations, the SNR improvement, dwell time increase, tracking and imaging capabilities, for small debris and PHAs compared to existing assets, was illustrated. Since the MeerKAT radio telescope is a precursor for the SKA Africa, extrapolating the capabilities of the MeerKAT radar to the SKA radar implies that it would be the most sensitive and high performing contributor to space situational awareness, upon its completion. From this feasibility study, the MeerKAT 3D distributed radar will be able to detect debris of diameter less than 10 cm at altitudes between 700 km to 900 km, and PHAs, with a range resolution of 15 m, a minimum SNR of 14 dB for 152 pulses for a coherent integration time of 2.02 ms. The target range (derived from the two way delay), velocity (from Doppler frequency) and direction will be measured within an accuracy of: 2.116 m, 15.519 m/s, 0.083° (single antenna), respectively. The range, velocity accuracies and SNR affect orbit prediction accuracy by 0.021 minutes for orbit period and 0.0057° for orbit inclination. The multistatic radar was found to be the most suitable and computationally efficient configuration compared to the bistatic and SIMO configurations, and beamforming should be implemented as required by specific target geometry.
|
2 |
Remote sensing of the directional ocean wave spectra using HF backscatter radarElabdallah, Abdelrahman Mohamed. January 1982 (has links)
Thesis (Ph. D.)--Stanford University, 1982. / Includes bibliographical references (leaves 81-85).
|
3 |
Calibration of airborne L-, X-, and P-band fully polarimetric SAR systems using various corner reflectorsAlgafsh, Abdullah January 2017 (has links)
Synthetic aperture radar polarimetry is one of the current developments in the field of remote sensing, due to the ability of delivering more information on the physical properties of the surface. It is known as the science of acquiring, processing and analysing the polarisation state in an electromagnetic field. The increase of information with respect to scalar radar comes at a price, not only for the high cost of building the radar system and processing the data or increasing the complexity of the design, but also for the amount of effort needed to calibrate the data. Synthetic aperture radar polarimetric calibration is an essential pre- processing stage for the correction of distortion interference which is caused by the system inaccuracies as well as atmospheric effects. Our goal, with this thesis, is to use multiple passive point targets to establish the difference between fully, and compact polarimetric synthetic aperture radar systems on both calibration, and the effects of penetration. First, we detail the selection, design, manufacture, and deployment of different passive point targets in the field for acquiring X- and P-band synthetic aperture radar data in the Netherlands. We started by presenting the selection and design of multiple passive point targets. These were a combination of classic trihedral and dihedral corner reflectors, as well as gridded trihedral and dihedral corner reflectors. Additionally, we detailed the construction of these corner reflectors. The number of constructed corner reflector totalled sixteen, where six are for X-band and six for P-band, as well as four gridded corner reflectors for X-band. Finally, we present the deployment of the corner reflectors at three different sites with carefully surveyed and oriented positions. a Then, we present the calibration of three different fully polarimetric synthetic aperture radar sensors. The first sensor is the L-band synthetic aperture radar sensor and we acquired data using two square trihedral corner reflectors. The calibration includes an evaluation of two crosstalk methods, which are the Quegan and the Ainsworth methods. The results showed that the crosstalk parameters for the Quegan method are all between -17 dB to -21 dB before calibration, while there is a small improvement in the range of 3 dB after calibration. While the Ainsworth method shows around -20 dB before calibration, and around -40 dB after calibration. Moreover, the phase, channel imbalance, and radiometric calibration were corrected using the two corner reflectors. Furthermore, the other two synthetic aperture radar sensors are X- and P-band synthetic aperture radar sensors, and we acquired polarimetric data using our sixteen corner reflectors. The calibration includes the crosstalk estimation, and correction using the Ainsworth method and the results showed the crosstalk parameters before calibration for X-band are around -23 dB, and they are around -43 dB after calibration, while crosstalk parameters before calibration for P-band are around -10 dB, and they are around -30 dB after calibration. The calibration also includes the phase, channel imbalance, and radiometric calibration, as well as geometric correction and signal noise ration measurement, for both X- and P-band. Next, we present the performance of gridded trihedral and dihedral corner reflectors using an X-band synthetic aperture radar system. The results showed both gridded trihedral and dihedral reflectors are perfect targets for correcting the amplitude compared to classical corner reflectors; however, it is not possible to use the gridded reflectors to correct the phase as we need a return from two channels to have a zero-phase difference between the polarisation channels H - V. Furthermore, we detail the compact polarimetric calibration over three com- pact polarimetric modes using a square trihedral corner reflector for the X-band dataset. The results showed no change in the π/mode while a 90ᵒ phase bias showed in the CTLR mode. Finally, the DCP mode showed a 64.43° phase difference, and it was corrected to have a zero phase, and the channel imbalance was very high at 45.92, the channels were adjusted to have a channel imbalance of 1. b Finally, an experiment to measure the penetration and reduction of P-band signal from a synthetic aperture radar system was performed using two triangular trihedral corner reflectors. Both of them have 1.5 m inner leg dimensions. The first triangular trihedral corner reflector was deployed in a deciduous grove of trees, while the other one was deployed a 10 m distance away on a grass covered field. After system calibration based on the reflector in the clear, the results showed a reduction of 0.6 dB in the HH channel, with 2.28 dB in the W channel. The larger attenuation at W is attributable to the vertical structure of the trees. Additionally, we measured the polarimetric degradation of the triangular trihedral corner reflector immersed in vegetation (trees). Further, after calibration, the co-polarisation phase difference is zero degrees for the triangular corner reflector which was outside the trees, and 62.85ᵒ for the corner reflector inside the trees. The designed and fabricated X- and P-band SAR can work operationally with the calibration parameters obtained in this thesis. The data generated through the calibration experiments can be exploited for further applications.
|
4 |
Lava flow volume and morphology from ERS synthetic aperture radar interferometryStevens, Nicola Frances January 1999 (has links)
No description available.
|
5 |
SAR modelling for ecological applicationsDarling, Paul Simon January 1998 (has links)
No description available.
|
6 |
An Enhanced Resolution Spaceborne ScatterometerLong, David G. 10 1900 (has links)
International Telemetering Conference Proceedings / October 25-28, 1993 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Spaceborne wind scatterometers are designed principally to measure radar backscatter from the ocean's surface for the determination of the near-surface wind direction and speed. Although measurements of the radar backscatter are made over land, application of these measurements has been limited primarily to the calibration of the instrument due to their low resolution (typically 50 km). However, a recently developed resolution enhancement technique can be applied to the measurements to produced medium-scale radar backscatter images of the earth's surface. Such images have proven useful in the study of tropical vegetation3 as well as glacial5 and sea6 ice. The technique has been successfully applied2 to Seasat scatterometer (SASS) data to achieve image resolution as fine as 3-4 km. The method can also be applied to ERS-l scatterometer data. Unfortunately, the instrument processing method employed by SASS limits the ultimate resolution which can be obtained with the method. To achieve the desired measurement overlap, multiple satellite passes are required. However, with minor modifications to future Doppler scatterometer systems (such as the NASA scatterometer [NSCAT] and its follow-on EoS-era scatterometer NEXSCAT) imaging resolutions down to 1-2 km for land/ice and 5-10 km for wind measurement may be achieved on a single pass with a moderate increase in downlink bandwidth (from 3.1 kbps to 750 kbps). This paper describes these modifications and briefly describes some of the applications of this medium-scale Ku-band imagery for vegetation studies, hydrology, sea ice mapping, and the study of mesoscale winds.
|
7 |
Satellite scatterometers : calibration using a ground station and statistical measurement theory /Yoho, Peter K., January 2003 (has links) (PDF)
Thesis (Ph. D.)--Brigham Young University. Dept. of Electrical and Computer Engineering. / Includes bibliographical references (p. 199-206).
|
8 |
Radar imaging using two-dimensional synthetic aperture radar (SAR) techniques /Ravichandran, Kulasegaram. January 2007 (has links)
Thesis (M.S.)--University of Nevada, Reno, 2007. / Library also has microfilm. Ann Arbor, Mich. : ProQuest Information and Learning Company, [2008]. 1 microfilm reel ; 35 mm. Online version available on the World Wide Web.
|
9 |
Frequency estimation of linear FM scatterometer pulses received by the SeaWinds Calibration Ground Station /Haycock, Spencer S., January 2004 (has links) (PDF)
Thesis (M.S.)--Brigham Young University. Dept. of Electrical and Computer Engineering, 2004. / Includes bibliographical references (p. 75-77).
|
10 |
Computation of the scattering properties of nonspherical ice crystalsZhang, Zhibo 15 November 2004 (has links)
This thesis is made up of three parts on the computation of scattering properties of nonspherical
particles in the atmosphere. In the first part, a new crystal type-droxtal-is introduced to make a better
representation of the shape of small ice crystals in the uppermost portions of midlatitude and tropical cirrus
clouds. Scattering properties of droxtal ice crystals are investigated by using the Improved-Geometric Optic
(IGO) method. At the visible wavelength, due to the presence of the hexagonal structure, all elements of the
phase matrix of droxtal ice crystals share some common features with hexagonal ice crystals, such as 220
and 460 halos. In the second part of this thesis, the possibility of enhancing the performance of current
Anomalous Diffraction Theory (ADT) is investigated. In conventional ADT models, integrations are
usually carried out in the domain of the particle projection. By transforming the integration domain to the
domain of scaled projectile length, the algorithm of conventional ADT models is enhanced. Because the
distribution of scaled projectile length is independent of the particle's physical size as long as the shape
remains the same, the new algorithm is especially efficient for the calculation of a large number of particles
with the same shape but different sizes. Finally, in the third part, the backscattering properties of
nonspherical ice crystals at the 94GHz frequency are studied by employing the Finite-Difference Time-
Domain (FDTD) method. The most important factor that controls the backscattering cross section is found
to be the ratio of the volume-equal radius to the maximum dimension of the ice crystal. Substantial
differences in backscattering cross sections are found between horizontal orientated and randomly oriented
ice crystals. An analytical formula is derived for the relationship between the ice water (IWC) content and
the radar reflectivity ( e Z ). It is shown that a change to the concentration of ice crystals without any
changes on the size distribution or particle habits leads only to a linear e Z IWC - relationship. The famous
power law e Z IWC - relationship is the result of the shift of the peak of particle size distribution.
|
Page generated in 0.097 seconds