Neste trabalho, modelos de pedestres, utilizados para simular a caracterização da radiopropagação em interiores de edifícios, são reproduzidos, analisados e comparados em diversos ambientes e com diferentes fluxos de pedestres. Estes modelos têm como base o método de traçado de raios (imagens), e se diferenciam em relação ao formato (lâmina, paralelepípedo e cilindro), constantes eletromagnéticas (material absorvente, condutor e dielétrico) e mecanismos de espalhamento de onda eletromagnética (difração, reflexão ou ambos) considerados sobre o pedestre. Para cada um dos modelos, um algoritmo foi criado e detalhado através da apresentação de equações e estrutura dos dados. A análise dos modelos foi realizada em duas etapas de comparação: uma com dados empíricos e outra entre parâmetros de caracterização do canal, como desvanecimentos e dispersão no tempo, obtidos através de simulações com cada tipo de modelo de pedestre. Dentre os vinte e nove modelos ensaiados, os resultados da análise mostraram que o pedestre modelado por um cilindro condutor é aquele que apresenta resultados mais satisfatórios. / In this work, pedestrian models, used to simulate characterization of indoor radio propagation are reproduced, analyzed and compared in different environments with different pedestrian flows. These models are based on the image ray-tracing method, and differs themselves on shape (plate, cylinder and cuboid), electromagnetic constant (absorber, conductive and dielectric materials) and considered spread mechanisms (diffraction, reflection, or both). For each model, an algorithm is created and detailed through the presentation of equations and data structure. The models analysis were made in two comparison steps: one with empirical data and the other with the environment characterization parameters, like fading and time spread, obtained through simulations of each pedestrian model. Within twenty nine models simulation, the results analysis show that the most satisfactory results are given by the model that considers the pedestrian as a conducting cylinder.

Neste trabalho, modelos de pedestres, utilizados para simular a caracterização da radiopropagação em interiores de edifícios, são reproduzidos, analisados e comparados em diversos ambientes e com diferentes fluxos de pedestres. Estes modelos têm como base o método de traçado de raios (imagens), e se diferenciam em relação ao formato (lâmina, paralelepípedo e cilindro), constantes eletromagnéticas (material absorvente, condutor e dielétrico) e mecanismos de espalhamento de onda eletromagnética (difração, reflexão ou ambos) considerados sobre o pedestre. Para cada um dos modelos, um algoritmo foi criado e detalhado através da apresentação de equações e estrutura dos dados. A análise dos modelos foi realizada em duas etapas de comparação: uma com dados empíricos e outra entre parâmetros de caracterização do canal, como desvanecimentos e dispersão no tempo, obtidos através de simulações com cada tipo de modelo de pedestre. Dentre os vinte e nove modelos ensaiados, os resultados da análise mostraram que o pedestre modelado por um cilindro condutor é aquele que apresenta resultados mais satisfatórios. / In this work, pedestrian models, used to simulate characterization of indoor radio propagation are reproduced, analyzed and compared in different environments with different pedestrian flows. These models are based on the image ray-tracing method, and differs themselves on shape (plate, cylinder and cuboid), electromagnetic constant (absorber, conductive and dielectric materials) and considered spread mechanisms (diffraction, reflection, or both). For each model, an algorithm is created and detailed through the presentation of equations and data structure. The models analysis were made in two comparison steps: one with empirical data and the other with the environment characterization parameters, like fading and time spread, obtained through simulations of each pedestrian model. Within twenty nine models simulation, the results analysis show that the most satisfactory results are given by the model that considers the pedestrian as a conducting cylinder.

The bidirectional reflectance distribution function (BRDF) that describes the scattered energy distribution is the most fundamental radiative property to calculate other properties. Although recent progress in surface metrology allows topography measurement in an atomic level, most studies still assume statistical distributions of roughness because of difficulty in roughness modeling. If the BRDF of rough silicon wafers is modeled with assumptions, predicted radiative properties may be inaccurate because non-Gaussian and anisotropic roughness of some wafers cannot be approximated with known statistics. Therefore, this thesis focuses on development of BRDF modeling that accounts for anisotropic roughness to accurately predict radiative properties of rough silicon surfaces with thin-film coatings. Monte Carlo ray-tracing methods are developed to consider multiple scattering and the change of polarization states and to satisfy physical laws such as the reciprocity principle. Silicon surface topographic data measured with an atomic force microscope are incorporated into the ray-tracing algorithms to model anisotropic roughness statistics. For validation, BRDF and emittance predictions are compared with measurements using an optical scatterometer and an integrating sphere. Good agreement between prediction and measurement demonstrates that the incorporation of topography measurement into BRDF modeling is essential for accurate property prediction. Roughness effects on the BRDF are so strong that BRDFs also reveal anisotropic features regardless of the presence of coating. Anisotropic roughness increases multiple scattering although first-order scattering is dominant, and thus enhances emittance noticeably. Silicon dioxide coating changes the magnitude of BRDF and emittance and reduces the anisotropic roughness effect on emittance enhancement. The research in this thesis advances the method to predict radiative properties by incorporating anisotropic rough statistics into BRDF modeling.

The effects of coupling parameters of active-passive and passive-passive coupling components on the coupling efficiency and signal mixed proportion for polymer optical fiber (POF) communication are investigated. A high sensitivity and easy fabricated POF displacement sensor is proposed by using cycling bending POF. Also, light sources for both Laser diode (LD) and light emitting diode (LED) are employed in this study. Experimental approaches and numerical analysis of rays tracing method and finite element method are performed to investigate the effects of coupling scheme and bent deformation on the optical power attenuation. Experimental results also illustrate the feasibility of using numerical analysis in coupling components and POF displacement sensor design. The effect of V-grooved array¡¦s POF on the coupling efficiency and signal mixed proportion are presented in active-passive components. The results indicate that the effect of the V-groove¡¦s shape and size on the coupling efficiency is very significant for all designed parameters of V-grooved array¡¦s POF. Compared with the parallel V-grooved array, the skew V-grooved array reduces the length of the coupling component and increases the output power between light source and POF. In the Y-branch POF coupler for passive-passive components, both the excess loss and the output power ratio of the Y-branch couplers are very sensitive to the couple angle, the coupling distance and the refractive index of the filling medium between the emitting-end and receiving-end of fibers. The results also show that the proposed model can be used to analyze the coupling efficiencies in the asymmetrical Y-branch or axial symmetrical couplers with acceptable accuracy. In the POF displacement sensor using by cycling bending loss, the results show that the effect of roller¡¦s number, interval and wavelength on light power attenuation is very significant. Based on the experimental data, a linear equation is derived to estimate the relationship between the power loss and the relative displacement. The difference between the estimated results and the experimental results is less than 8%.

No description available.

This thesis is aimed at simulation of auditory space. It describes the most frequently used panning method: Vector Base Amplitude Panning. Also is focused on image source method, which allows computing the parameters of direct sound wave and reflections in rectangular room. This method is compared with ray–tracing method, which is also often used. It deals with the matter of the frequency – dependent absorption of materials in reflection of the sound wave against the wall. On the basis of these information two applications were designed in MATLAB development environment. The first one allows the simulation of auditory space. The other one is the application for sound source panning by its azimuth and distance.

The proposed dissertation thesis contains an analysis of conditions on the boundary between layers having varied electromagnetic properties. The research is performed using consistent theoretical derivation of analytical formulas, and the underlying problem is considered also in view of multiple boundaries including the effect of the propagation of electromagnetic waves having different instantaneous speed. The author presents a survey and formulation of the basic characteristics of methods used for electromagnetic wave propagation analysis; in this respect, special emphasis is placed on radial models. The processing of the topic involved the designing and verification (using a set of different, layered planar materials) of algorithms to analyze the electromagnetic field components. The algorithm was assembled to enable simple evaluation of all components of the electromagnetic field in relation to the speed of the wave propagation in a heterogeneous environment. The proposed algorithms are compared by means of different numerical methods for the modelling of electromagnetic waves on the boundary between materials; moreover, electromagnetic field components in common points of the model were also subject to comparison. When in conjunction with tools facilitating the analysis of material response to the source of a continuous signal, the algorithms constitute a supplementary instrument for the design of a layered material. Such design enables the realization of, for example, recoilless plane, recoilless transition between different types of environment, and filters for both optical and radio frequencies.

台灣位於環太平洋地震帶上，地形為山地居多，且地質脆弱，加上位於西太平洋副熱帶地區，使得山區常受到颱風的侵擾而發生崩塌，導致土石流和洪水等災害發生，進而影響人民的生命和財產安全。因此，如何有效地建置崩塌地區域資料庫，成為國土保育與災害防治的重要課題。以往利用遙測與航測技術於崩塌地萃取的研究中，大多是於幾何糾正後衛星影像或是航測正射影像上分析崩塌地，但產製正射影像或是糾正衛星影像時，都需要花費較多的時間，對於講求時效性的救災行動而言頗為不利。本研究之目的為發展一套不需使用正射影像萃取崩塌地的方法，以物件導向影像分類法，於DMC（Digital Mapping Camera）航測原始影像上直接萃取崩塌地資訊。首先採取多重解析影像分割的技術，將航測影像依像元光譜和形狀同質性分割成不同區塊（物件），接著利用影像光譜統計值搭配區域成長法，偵測影像中的雲覆蓋地區並過濾。其次，根據光譜亮度統計特徵值，將影像區分成陰暗地區、正常地區以及較亮地區之三種土地覆蓋類型，使用線性相關糾正法（Linear-correlation Correction）將陰暗地區光譜亮度值轉換至正常地區，並利用物件的特徵值，如光譜、面積、形狀以及相關性依序萃取此三種土地覆蓋類型內的崩塌地。最後，使用光線追蹤法 （Ray-tracing），將崩塌地區塊從影像坐標轉換至地圖坐標，使其可以套疊地形資料如坡度、坡向，並進行空間分析以提升崩塌地的判釋精度。研究結果顯示，崩塌地萃取之使用者精度和生產者精度，均有82%以上，並且整個實驗可大量批次處理影像，及快速建立崩塌地資料庫，本研究之方法和崩塌地資料庫將有助於國土保育與崩塌地的災害防治。 / Being located in a subtropical and seismic zone of the West Pacific, the geology is fragile and topography is mountainous in Taiwan. Landslides, floods and other disasters induced by typhoons occur frequently, and it cause the life-threatening and property loss of human beings in Taiwan. Therefore, how to establish landslides data effectively become an important issue of land conservation and disasters management. In recently years, most of the researchers used aerial ortho-images or satellite georeferencing images to detect landslides sites. However, it spent a lot of time generating aerial ortho-images and rectifying satellite images, and it also reduced the efficiency of landslides analysis. Thus, this study developed an object-oriented classification method, which can be directly applied in raw image data, to detect landslides sites. Firstly, this study used multi-resolution image segmentation technique to segment images acquired by Z/I DMC（Digital Mapping Camera） into individual regions （objects） according to the homogeneity of spectral and shape features, and then removed cloud areas by using brightness features depended on the spectral information of images. Secondly, the study divided the entire image into three areas, which are darker area, normal area and lighter area, according to brightness value. Next, Linear-correlation correction （LCC） method was used in this study to transform darker area to normal area so that it can easily detect the landslides sites in darker area, and the object features, such as spectral, area, shape and space correlation indices, were used to extract landslide sites in images. Finally, in order to enhance the accuracy of landslide, the initial landslides were converted from image coordinate system to map coordinate system by ray-tracing method, so the initial landslides data can be further extracted by using topographic data, including slope and aspect data. The results of this study showed that the user and producer accuracies of detecting landslides can reach up to 82%. Moreover, the entire experiments process of this study can batch analyze automatically and establish landslides database quickly. It is expected that the method and landslides data of this study may have contribution to land conservation and disasters management.