Global ETD Search

1	Configuration Scrubbing Architectures for High-Reliability FPGA Systems Stoddard, Aaron Gerald 01 December 2015 (has links) (PDF) Field Programmable Gate Arrays (FPGAs) are being used more frequently in space applications because of their reconfigurability and intensive processing capabilities. FPGAs in environments like space are susceptible to ionizing radiation which can cause Single Event Upsets (SEUs) in the FPGA's configuration memory. These upsets may cause the programmed user design on the FPGA to deviate from its normal behavior. Space missions cannot afford to allow important data processing applications to become corrupted due to these radiation upsets.Configuration scrubbing is an upset mitigation technique that detects and corrects upsets in an FPGA's configuration memory. Configuration scrubbing periodically monitors an FPGA's configuration memory utilizing mechanisms such as Error Correction Codes (ECCs), Cyclic Redundancy Checks (CRCs), a protected golden file, and partial reconfiguration to detect and correct upset memory bits. This work presents improved Xilinx 7-Series configuration scrubbing architectures that achieve minimal hardware footprints, competitive performance metrics, and robust detection and correction capabilities. The two principal scrubbing architectures presented in this work are the readback and hybrid scrubbers which detect and correct Single Bit Upsets (SBUs) and Multi-Bit Upsets (MBUs). Harnessing the performance advantages granted by the 7-Series internal Readback CRC scan, a hybrid scrubber built in software for the Zynq XZC07020 FPGA has been measured to correct SBUs in 8.024 ms, even-numbered MBUs in 13.38 ms, and odd-numbered MBUs in 21.40 ms. It can also perform a full readback scrub of the entire device in under two seconds. These scrubbing architectures were validated in radiation beam tests, where one of the architectures corrected MBUs as large as sixteen bits in a single frame. FPGA radiation testing BYU scrubbing configuration readback reliability TMR SEU ECC CRC MBU Zynq PCAP Xilinx bitstream upset mitigation 7-Series Electrical and Computer Engineering
2	High-Speed Programmable FPGA Configuration Memory Access Using JTAG Gruwell, Ammon Bradley 01 April 2017 (has links) Over the past couple of decades Field Programmable Gate Arrays (FPGAs) have become increasingly useful in a variety of domains. This is due to their low cost and flexibility compared to custom ASICs. This increasing interest in FPGAs has driven the need for tools that both qualify and improve the reliability of FPGAs for applications where the reconfigurability of FPGAs makes them vulnerable to radiation upsets such as in aerospace environments. Such tools ideally work with a wide variety of devices, are highly programmable but simple to use, and perform tasks at relatively high speeds. Of the various FPGA configuration interfaces available, the Joint Test Action Group (JTAG) standard for serial communication is the most universally compatible interface due to its use for verifying integrated circuits and testing printed circuit board connectivity. This universality makes it a good interface for tools seeking to access FPGA configuration memory. This thesis introduces a new tool architecture for high-speed, programmable JTAG access to FPGA configuration memory. This tool, called the JTAG Configuration Manager (JCM), is made up of a large C++ software library that runs on an embedded micro-processor coupled with a hardware JTAG controller module implemented in programmable logic. The JCM software library allows for the development of custom JTAG communication of any kind, although this thesis focuses on applications related to FPGA reliability. The JCM hardware controller module allows these software-generated JTAG sequences to be streamed out at very high speeds. Together the software and hardware provide the high-speed and programmability that is important for many JTAG applications. FPGA JTAG scrubbing fault injection radiation testing laser testing C++ Python BYU configuration readback reliability SEU Xilinx bitstream upset mitigation hardware software high speed configuration memory CRAM SRAM Joint Test Action Group ionizing radiation space aerospace interface serial ARM processor architecture programmable logic MicroZed Zynq Linux Electrical and Computer Engineering

Search results

Configuration Scrubbing Architectures for High-Reliability FPGA Systems

High-Speed Programmable FPGA Configuration Memory Access Using JTAG