This thesis investigates the use of the numerical modeling tools LS-DYNA and USA in modeling general far-field underwater explosions (UNDEX) by modeling a three-dimensional box barge that is subjected to a far-field underwater explosion. Past UNDEX models using these tools have not been validated by experiment and most are limited to very specific problems because of the simplifying assumptions they make. USA is a boundary element code that requires only the structural model of the box barge. LS-DYNA is a dynamic finite element code and requires both the structural model and the surrounding fluid model, which is modeled with acoustic pressure elements. Analysis of the box barge problem results finds that the program USA is a valid tool for modeling the initial shock response of surface ships when cavitation effects are not considered. LS-DYNA models are found to be very dependent on the accuracy of the fluid mesh. The accuracy of the fluid mesh is determined by the ability of the mesh to adequately capture the peak pressure and discontinuity of the shock wave. The peak pressure captured by the model also determines the accuracy of the cavitation region captured in the fluid model. Assumptions made in the formulation of the fluid model causes potential inaccurate fluid-structure interaction and boundary condition problems cause further inaccuracies in the box barge model. These findings provide a base of knowledge for the current capabilities of UNDEX modeling in USA and LS-DYNA from which they can be improved in future work. / Master of Science

An axisymmetric finite element solution method is developed for axial wave propagation through a series of threaded connections in rock drills. A piston impacts axially on a string of rods held together by threaded joints and the wave propagates through these joints before reaching the bit. The energy lost in the joints limits the maximum effective depth of the drill. Several computational techniques are used to efficiently model the problem. Non-reflecting boundaries are used to numerically absorb the waves as they exit a joint. The stored waves are then re-initiated into the next joint eliminating modeling of the entire assembly of rods. The preload in the threads is modeled by shrinking the threaded sleeve onto the rods. A new dynamic relaxation damping scheme is used which starts with an undamped model and then increases the damping until the solution converges. This method converges more rapidly than the standard constant damping. / Master of Science

We investigate a certain epidemics model, with and without noise. Some parameter analysis is performed together with computer simulations. The model was presented in Iacus (2008).

<p>We investigate a certain epidemics model, with and without noise. Some parameter analysis is performed together with computer simulations. The model was presented in Iacus (2008).</p>