Modern chemical technology is an efficient tool for solving problems, particularly within the complex environment of the pulp and paper industry, and the combination of experimental studies, mill data and mass balance calculations are of fundamental importance to the development of the industry. In this study various examples are presented, whereby chemical technology is of fundamental importance. It is well documented that under normal conditions the molten salt mixture from the kraft recovery boiler flows down into the dissolving tank without problems. However, in the case of  alternatives to the kraft recovery boiler, knowledge of more precise data of the molten salts is required for the design calculations. In this study the viscosity for the case of sodium carbonate and 30 mole% sulphide has been measured and is of the magnitude 2 – 3 cP at temperatures relevant for a recovery boiler, i.e. similar to water at room temperature. The presence of non-process elements (NPE) in a typical pulp mill has been investigated. The main input is with regards to the wood, and anticipated problems include; deposits in evaporators, high dead-load in liquor streams, plugging of the upper part of the recovery boiler and decreasing efficiency in the causticization department. Efficient green liquor clarification is of the greatest importance as an efficient kidney for many NPE. Mill data and calculations show that the magnesium added in the oxygen delignification does not form a closed loop. Integration of a prehydrolysis kraft pulp mill producing dissolving pulp with a plant producing viscose textile fiber could be highly beneficial. The prehydrolysis liquor will contain both sugars and acetic acid. It is however not possible to fully replace the sulphuric acid of the viscose spinning bath with acetic acid of own production. The sulphuric chemicals from the viscose plant can be partly taken care of in the kraft recovery area as well as the viscose plant which can be supplied with alkali and sulphuric acid. Zinc-containing effluents from the viscose plant can be treated with green liquor to precipitate zinc sulphide. / Modern chemical technology is an extremely efficient tool for solving problems particularly in a complicated environment such as the pulp and paper industry. Here, examples are studied during which chemical technology is of fundamental importance. At normal conditions the molten salt mixture from the kraft recovery boiler flows down into the dissolving tank without hindrance. However, for certain kraft recovery boiler alternatives, knowledge of more precise data of the molten salts is required. The viscosity for the case of sodium carbonate and 30 mole% sulphide has been measured and is of the magnitude 2 – 3 cP at relevant temperatures. The main input of non-process elements (NPE) is down to the wood, and known problems include deposits in evaporators and decreasing efficiency in the causticization department. Green liquor clarification is an efficient kidney for many NPE. Magnesium added in the oxygen delignification does not form a closed loop. Integration of a prehydrolysis kraft pulp mill producing dissolving pulp with a plant producing viscose textile fiber could be of significant interest, as the handling of both alkali and sulphuric compounds can be integrated. Problems will however arise as the capacity of the pulping line and the chemical recovery has to be adjusted.

Naturskyddsföreningen gav författarna uppgiften att undersöka förekommande viskosprocesser och alternativa regenereringsprocesser, detta för att identifiera hur hållbara de är ur ett miljöperspektiv och vilka processer som går att applicera på bambu. Detta för att se möjligheten att märka bambuviskos med Bra Miljöval och för att klargöra frekvent uppkommande frågor angående bambuviskos. Syftet är att se på de olika processernas kemiska innehåll samt vilka utsläpp de orsakar till luft och vatten. Ett delmål med rapporten är att den ska kunna användas som material vid vidareutveckling av kriterierna för Bra Miljöval Textil. Resultat som erhållits vid jämförelser av studerad litteratur är att de betydande faktorerna för miljöpåverkan från massaframställningen samt viskos- och lyocellprocessen beror av: använda kemikalier i processen, energianvändningen och vilken typ av energi, möjligheten till rening av utsläpp till luft och vatten samt återvinning av energi och kemikalier. Beroende på vilket råmaterial som används vid massaframställningen kan skillnader i markanvändning, användning av bekämpningsmedel och gödningsmedel samt upptagande av koldioxid skilja sig. Massa- och fiberframställning bör vara integrerade då energiförbrukning och mängd kemikalier kan minskas. Energin kan dessutom återvinnas till större utsträckning.Genom miljömärkningar från oberoende organisationer blir det lättare för konsumenter att göra miljömedvetna val och veta vad märkningarna står för. Sammanfattningsvis ska det påpekas att om regenererad bambu framställs som den görs idag är den ingen hållbar fiber, men sker framställningen i en integrerad process där kemikalier och energi återvinns samt rening av utsläpp till luft och vatten sker, kan bambuviskos bli en hållbar fiber för framtiden. The Swedish Society for Nature Conservation (SSNC) gave the authors the task to investigative present viscose processes and alternative regeneration processes to identify how sustainable they are from an environmental perspective, and examine which processes that can be applied to bamboo. This to see the possibility to label bamboo viscose with “Bra Miljöval” (Good Environmental Choice), which is the eco-label of SSNC, and to clarify the frequently emerging issues concerning bamboo viscose. The aim is to look at the various processes, their chemical content and the emissions they cause to air and water. Another objective of the report is that it can be used as material for further development of the criteria for “Bra Miljöval”.Results obtained when comparing the studied literature is that the significant factors of the environmental impact from the pulp production, the viscose and lyocell processes depends on: chemicals used in the process, energy and energy source, the possibility of purifying emissions to air and water and recycling of energy and chemicals. Depending on the raw materials used for pulp production, differences in land use, use of pesticides and fertilizers as well as absorption of carbon dioxide differ. Pulp and fibre production should be integrated to reduce energy consumption and the amount of chemicals used. The energy can also be recycled to a greater extent.Eco-labels from independent organizations will make it easier for consumers to make environmentally conscious choices and be aware of what the labels stand for.In conclusion, it should be noted that if the regenerated bamboo is produced as it is today, it is not a sustainable fibre. If the production is done through an integrated process in which chemicals and energy recovery and purification of air and water occurs, bamboo viscose can be a sustainable fibre for the future. / Program: Textilingenjörsutbildningen