The Diploma thesis contains design of plumbing and gas installations in a pension. The theory solves warming of water, ways of warming, and dimensioning according to ČSN 06 0320. The calculation part solves variants of hot water preparations and installations of sewerage water. The practical part contains a design and a projekt of plumbing and gas installations.

The subject of the diploma thesis is design a new building with a camping in the village Šoporňa. The building is situated near the river Váh on flat terrain. Emphasis was placed on the total visual impression of the building on its stand out from the surrounding landscape. The building will serve as a recreation building with the possibility of short and long-tern housing. There is a restaurant with outdoor seating and an accommodation capacity for 90 people, trade with sport equipment, service for vehicles and boats, garage for boats, a 11,6 metres high climbing wall, conference rooms and halls for exercise. The building has three floors above and no basement. The project includes a flat roof with an attic.

V posledních letech se metody slepé dekonvoluce rozšířily do celé řady technických a vědních oborů zejména, když nejsou již limitovány výpočetně. Techniky zpracování signálu založené na slepé dekonvoluci slibují možnosti zlepšení kvality výsledků dosažených zobrazením pomocí elektronového mikroskopu. Hlavním úkolem této práce je formulování problému slepé dekonvoluce obrazů z elektronového mikroskopu a hledání vhodného řešení s jeho následnou implementací a porovnáním s dostupnou funkcí Matlab Image Processing Toolboxu. Úplným cílem je tedy vytvoření algoritmu korigujícícho vady vzniklé v procesu zobrazení v programovém prostředí Matlabu. Navržený přístup je založen na regularizačních technikách slepé dekonvoluce.

The aim of this master project is to design a nearly zero-energy building of a guesthouse with a restaurant in the village Vrbice u Velkých Pavlovic. The project contains architectural-construction part and concept of building services. As the third part there is a design and concept of a wastewater treatment wetland system. The building has two floors. On the ground floor there is a restaurant, kitchen, reception and technical facilities, the premises of the 2 nd floor contain guest rooms. The structural system is designed from ceramic blocks with thermal insulation from mineral wool. Horizontal load-bearing structures and stair construction are designed from cast-in-place reinforced concrete. The building has a warm flat roof. The building has a mechanical heat recovery ventilation. For heating and water heating there is a heat pump and a condensing boiler, for cooling there is a multi-split and VRV system. The building also includes a storage reservoir for collecting rainwater and photovoltaic panels on the roof. The building site contains also an outdoor park, storage with carport and a garden with wastewater treatment wetland technologies and biotope lake. The project was carried out by the ArchiCad and Autocad programme.

Subject of this diploma this is prepare a documentation for the construction of a hotel. Designed object is located in the Brno city. The hotel meets the conditions of a three-star (***) economic standard. It is designed with 18 accommodation units, of which 2 rooms for disabled. The hotel accommodates only 38 people. There is a restaurant with a terrace in the hotel too. Underground garages primarily designed for parking cars of hotel visitors. The object is designed in a rectangular shape. The construction system of the hotel is combined. Perimeter masonry in the upper floors is made of ceramic blocks, inside are a reinforced concrete skeleton. The foundation structure is designed as a system of waterproof concrete. The floor structure is designed as reinforced concrete slabs. The roofing will be solved by a flat roof with a gravel layer. The whole building is insulated to meet all the requirements of energy consumption of buildings. The main entrance is oriented to the west. In front of the building there is a parking space for hotel guests.

The main aim of this master’s thesis is to elaborate the project documentation of a new restaurant Chalupa. Building is situated in area of the local camp on the edge of the town called Mořkov. The building has one above-ground floor and a partial basement. On above-ground floor, there are two main parts: restaurant and kitchen. Then there are also private room and sanitary facilities for both customers and staff. The building is designed as a CLT superstructure and has a gable roof. The vertical loadbearing structures and non-loadbearing walls are designed of CLT panels. The horizontal loadbearing structures are designed of reinforced cast-in-place concrete slab. Heating energy is supplied by pellet boiler. Ventilation is provided by air conditioning unit. Shading is provided by external louvers. In the third pard, I am creating the facility management plan for this building. The project and visualizations were carried out in the Autocad program.

This diploma thesis elaborates project documentation for the construction of building. The object is located in the mountain area in Pec pod Sněžkou. The acommoation house is designed as a building for fooding and lodging. The building has three stories. Ground floor is nonresidental and partly on slop. There are garages, bicycle storage and staffroom. On the first floor there is a small restaurant and rooms for accommodation. From those rooms you can go on the ground or terrace. The second floor is entirely residential. The total accommodation capacity of the hotel is 46 people.

The aim of this work is to study methods for requirement determination and specification methods to create information system on the .NET platform which will be specialized for restaurant and bar establishments. The information system will be therefore process and archive informations about condition of goods, employee's schedule of working shifts, summary of incomes and expenses and book of norms.

The aim of the thesis was to create an architectural study of the new synagogue in Opava. Similarly to many other towns and cities, the former synagogue was burned during Kristallnacht, the ruins were completely demolished and taken away. Nowadays there are no buildings on the site, except the former Rabbi’s house. Basic idea was in preserving the park character of the site by insertion of a non-arrogant low cuboid volume in the neighbourhood of apartment buildings from the first half of the 20th century. Designed form benefits from the character of the site while humbly avoiding construction on the actual place where the burnt synagogue stood. This creates an elegant, low object, whose two dominant ceiling slabs are filled with glass in between so it preserves a part of the park’s existing transparency and let the interior freely connect with exterior, also thanks to large sliding windows. In the center of the block is situated three sides closed atrium, which surrounds the new synagogue, into whose interior delicate scattered sunlight penetrates through the translucent onyx stone walls.

The diploma project handles the design of the synagogue and buildings of the Jewish community in Opava. The project is formed as an architectural study. Apart from the synagogue, the design also includes a mixed-use building under the administration of the Jewish community. This building combines several departments – a kosher restaurant, which is adapted to prepare meals according to Jewish eating habits, workshop rooms, administration of the Jewish community and community library. These departments are supplemented by temporary accommodation and starter flats for students and by two commercial units. The entire complex is complemented by underground parking and the necessary technical facilities. There was an original synagogue in the area, which was burned down by the Nazis and the only remnant here is the building of the former rabbinic house, now serving as the seat of the Christian Association. The basis of the concept is the legible urbanism of the design, which connects the polyfunctional building to the block type design of the surrounding buildings, allowing the synagogue itself to stand out as a solitary object. Its orientation creates a public space with the entrances to the synagogue and the outside seating of kosher restaurant. An architectural language of simple lines was chosen for both objects. The contrast and emphasis on the importance of the synagogue over the other object is achieved by the used materials. The monolithic reinforced concrete skeleton was chosen as the construction principle, the layout is different according to the departments of the individual parts of the design.