Electrical arcs are usually created with the breakdown of air, requiring an average electric field (AEF) of at least 100 kV/m in long spark gaps. This thesis explores a novel method of creating long electrical arcs using exploding wires (EWs). Arcs up to 60 m long have been produced with AEFs of just 4.5 kV/m. Extensive observations of the EW process are presented, which demonstrate that the arcs, which are a type of ‘restrike', form via the seldom-reported ‘plasma bead' restrike mechanism. Beads of plasma appear to form at sites of wire fragmentation, and can expand and coalesce into a continuous plasma column. There are strict conditions under which the plasma beads, and hence restrike channels, are produced. A restrike prediction model has been developed to provide a reliable method of producing restrike. The model was derived from the improved understanding of the restrike mechanism, and uses the wire's length and the energy supply voltage and characteristics as inputs. Capability diagrams are then constructed, which allow researchers to easily design experiments that will produce restrike. Extensive descriptions are provided of the experimental environments that were designed and constructed to facilitate long distance EW experiments. Experiments have been performed inside a high voltage laboratory, in the laboratory's outdoor compound, off the laboratory's earth grid and completely off-site. The off-site location allowed vertical experiments, suspended by a weather balloon, to be performed. This led to a theory on artificially triggered lightning, which is one of many exciting future applications that are suggested. It is also predicted that other research groups will be able to create arcs of several hundred metres long.

This research is aimed at exploding a wire via electromagnetic induction, with a preference for obtaining restrike of the exploding wire in a ring shape or otherwise. Literature on both exploding wire and electromagnetic induction are introduced together. A mathematical framework to describe the wire explosion by induction is formulated from first principles using the idea of magnetic flux linkages. The environment in which the experiments took place is described, with reference to matters of laboratory safety and also measurement of transient electrical current and voltage in the wire explosion by induction. The results describe the approaches taken to explode a wire by induction to obtain a plasma conductor. Voltage and current data are displayed and described. Throughout this work, there are long-exposure digital photographic images of the experiments taking place. These contribute to determining the outcome of experiments, and support the conclusions. Wires were exploded by induction in an air-cored mutually coupled coils system, and restrike of those wires was achieved. Electrical characteristics of wire explosion by electromagnetic induction are displayed and discussed based on what is known about straight exploding wires. Future works involving creation of plasma rings, electromagnetic thrust and exploding wires in vacuum are discussed.

Switching of shunt reactors and capacitor banks is known to cause a very high rate of rise of transient recovery voltage across the circuit breaker contacts. With improvements in circuit breaker technology, modern SF6 puffer circuits have been designed with less interrupter per pole than previous generations of SF6 circuit breakers. This has caused modern circuit breakers to operate with higher voltage stress in the dielectric recovery region after current interruption. Catastrophic failures of modern SF6 circuit breakers have been reported during shunt reactor and capacitor bank de-energisation. In those cases, evidence of cumulative re-strikes has been found to be the main cause of interrupter failure. Monitoring of voltage waveforms during switching would provide information about the magnitude and frequency of small re-ignitions and re-strikes. However, measuring waveforms at a moderately high frequency require plant outages to connect equipment. In recent years, there have been increasing interests in using RF measurements in condition monitoring of switchgear. The RF measurement technique used for measuring circuit breaker inter-pole switching time during capacitor bank closing is of particular interest. In this thesis, research has been carried out to investigate switching transients produced during circuit breaker switching capacitor banks and shunt reactors using a non-intrusive measurement technique. The proposed technique measures the high frequency and low frequency voltage waveforms during switching operations without the need of an outage. The principles of this measurement technique are discussed and field measurements were carried out at shunt rector and capacitor bank installation in two 275 kV air insulated substations. Results of the measurements are presented and discussed in this thesis. The proposed technique shows that it is relatively easy to monitor circuit breaker switching transients and useful information on switching instances can be extracted from the measured waveforms. Further research works are discussed to realise the full potential of the measuring technique.