Silicon photonics as a one of the most promising photonic integration technologies has attracted many attentions in recent years. The major feature of this technology is its compatibility with complementary metal-oxide semiconductor (CMOS) processes which makes it possible to integrate optical and electronic devices in a same chip and reduce the cost significantly. Another reason of using silicon photonics is the high index contrast between the silicon core and silicon dioxide cladding which ensures the high density integration of photonic devices on a single chip. Monolithic integration with electronic and optical circuits makes silicon photonics technology suitable for numerous applications. One example is microwave photonics (MWP). MWP is an area that studies the interaction between microwave and optical signal for the generation, processing, control and distribution of microwave signals by means of photonics. Silicon photonics offers a reduction in footprint, losses, packaging cost and power dissipation in MWP systems. This research in this thesis is focused on the design and fabrication of the silicon photonic devices for MWP signal processing and generation. Four MWP systems based on silicon photonic devices are proposed and experimentally demonstrated. 1) A single pass-band frequency-tunable MWP filter based on phase-modulation to intensity-modulation conversion in an optically pumped silicon-on-insulator (SOI) microring resonator (MRR) is designed and experimentally demonstrated. In the proposed filter, a phase-modulated optical signal is filtered by the SOI MRR, to have one first-order sideband suppressed by the MRR notch. The phase-modulated optical signal is converted to an intensity-modulated single-sideband (SSB) signal and detected at a photodetector (PD). The entire operation is equivalent to a single pass-band filter. The frequency tunability is achieved by tuning the resonance wavelength of the MRR, which is realized by optically pumping the MRR. A single pass-band MWP filter with a tunable center frequency from 16 to 23 GHz is experimentally demonstrated. 2) A broadband optically tunable MWP phase shifter with a tunable phase shift using three cascaded SOI MRRs that are optically pumped is designed and experimentally demonstrated. A microwave signal to be phase shifted is applied to an optical single-sideband (OSSB) modulator to generate an optical carrier and an optical sideband. The phase shift is introduced to the optical carrier by placing the optical carrier within the bandwidth of one resonance of the three cascaded MRRs. The experimental results show that by optically pumping the cascaded MRRs, a broadband MWP phase shifter with a bandwidth of 7 GHz with a tunable phase shift covering the entire 360o phase shift range is achieved. 3) A multi tap MWP filter with positive and negative coefficients using a silicon ring resonator modulator (RRM) is proposed and experimentally demonstrated. The RRM is designed and fabricated to operate based on the carrier depletion effect. The positive and negative coefficients are obtained by using opposite slopes of the modulation transmission response of the RRM. Two filter responses with two and three taps are experimentally demonstrated, showing the proof-of-principle for frequencies up to 18 GHz. 4) An approach to generate microwave signal based on enhanced four wave mixing (FWM) in an active silicon waveguide (SiWG) is studied. This SiWG is designed and fabricated, and the use of the active SiWG for MWP frequency multiplication to generate a frequency-sextupled millimeter-wave signal is experimentally demonstrated. Thanks to a reverse-biased p-n junction across the SiWG, the conversion efficiency of the FWM is improved, which leads to the improvement of the microwave frequency multiplication efficiency.

According to the 2018 Ethernet Roadmap projections, the requirements for high speed links keep increasing every year, always keeping an eye on the energy per bit consumption of the communication system. The Ethernet requirements are estimated to reach 1Tbps by 2022-2025. Optical links are one of the most concrete solutions to satisfy bandwidth requirements at low energy consumption. An optical link is a communication system that consists of a single end-to-end optical circuit. In contrast with vertical-cavity surface-emitting laser (VCSEL) technology, which is based on a direct laser modulation, silicon photonics technology (SPT) is based on indirect modulation. In order to perform the modulation, electro-optical modulators are needed in the optical link system for electrically modulating the optical power.This master thesis, developed at imec, will present the modeling of two different technologies of optical modulators: Silicon Ring Modulator and the Franz-Keldysh ElectroAbsorption Modulator. The work was initiated, since there were no available models of these devices in the actual framework for link analysis. First a preliminary study of the physical principles of the two devices was performed, in order to build the Matlab models. Then, these models were fitted with measurements, in order to adjust them to real-life behavior. After having obtained two working models of the two modulators, an alreadyexisting framework was used, to compare the energy consumption per bit in the optical link. However, the results obtained with the simulation didn’t highlight a technology to be preferred to the other. / Enligt prognoserna från Ethernet Roadmap 2018 fortsätter kraven på höghastighetslänkar att öka varje år och håller alltid ett öga på kommunikationssystemets energi konsumtion per bit. Ethernet-kraven beräknas nå 1Tbps 2022-2025.Optiska länkar är en av de mest konkreta lösningarna för att tillgodose bandbreddskrav vid låg energiförbrukning. En optisk länk är ett kommunikationssystem som utgör en punkt till punkt förbunden optisk krets. I motsats till teknik som utnyttjar den vertikala kavitetsytemitterande lasern (VCSEL), som bygger på en direkt lasermodulering, baseras kisel fotonikteknik (SPT) på indirekt modulering. För att utföra en modulering behövs elektrooptiska modulatorer i det optiska länksystemet för att elektriskt modulera den optiska effekten.Denna masteruppsats, utvecklad vid imec, kommer att presentera modelleringen av två olika teknologier av optiska modulatorer: Silicon Ring Modulatorn och Franz-Keldysh Electro Absorption Modulator. Arbetet, genomfördes eftersom det inte fanns några tillgängliga modeller av dessa enheter i själva ramverket för länkanalys. För det första genomfördes en preliminär studie av de två enheternas fysikaliska principer för att bygga Matlab-modellerna. Sedan jämfördes dessa modeller med mätningar för att anpassa dem till verkligt beteende. Efter att ha fått två arbetsmodeller av de två modulatorerna användes ett redan existerande ramverk för att jämföra energikonsumtionen per bit i den optiska länken. De resultat som erhölls med simuleringen indikerade emellertid inte någon teknik som skulle föredras framför den andra.