91 |
Experimental Deformation of O+ Oriented Synthetic Quartz Single CrystalsPoston, Edward J. 27 June 2017 (has links)
No description available.
|
92 |
The mechanical behavior of faulted rock at high temperature and pressure.Stesky, Robert Michael January 1975 (has links)
Thesis. 1975. Ph.D.--Massachusetts Institute of Technology. Dept. of Earth and Planetary Sciences. / Vita. / Includes bibliographical references. / Ph.D.
|
93 |
The Saltville thrust: investigation of a regional thrust fault in a foreland fold and thrust beltHouse, William Meredith January 1981 (has links)
Thin-skinned models of deformation are currently accepted for the southern Appalachians. The mechanics of this type of deformation are not well understood. The Saltville thrust, a major overthrust in the southern Appalachians, was investigated with respect to deformation mechanics. Thrust termination occurs in the overturned, northwest facing Sinking Creek anticline, at the juncture between the southern and central Appalachians . The primary regional displacement transfer mechanism at the thrust terminus is the transition from faulting to folding. Mesoscopic fabrics show variations in deformation intensity across the anticline, with high strains on the northwest limb, and low strains on the upright southeast limb. Strain accommodation on the overturned limb was by folding, faulting, and cleavage development. Knox Dolomite in the core of the anticline is upward facing and unfolded. Strain patterns and facing data indicate that shear thrusting at depth caused passive regional folding. Subsequent movement caused the thrust to act as a break thrust and cut previously folded strata.
Cataclasis is the primary bulk deformation mechanism along the thrust surface. Cataclastic fabrics in dolomites range from protocataclasites to ultracataclasites, and reflect changes in frictional grinding. Foliated cataclasites are described. Fault-rock fabrics indicate that thrust-sheet emplacement occurred through seismic failure, facilitated by transient, abnormally high pore pressures, and aseismic failure accomplished within a layer of cataclastically flowing gouge. Thin fault zones and rapid decreases in deformation intensity away from the fault surface indicate rapid sliding, and a lack of frictional grinding. / M.S.
|
94 |
Microstructural and crystallographic fabric analysis of stretched-pebble conglomerates in central VermontGardner, Eric Jesse 16 December 2009 (has links)
Microstructures and quartz crystallographic fabrics of conglomerate lenses from the Tyson Formation, which composes the basal portion of the authochthonous Paleozoic cover sequence in central Vermont, were analyzed to investigate the complex deformational history associated with a polydefonned area. Microstructural observations and crystallographic fabric techniques were used for kinematic analysis, and to relate the development of microstructures and lattice preferred orientations to the local and regional structural settings. Additionally, the study compares the development of microstructures and lattice preferred orientations, and investigates strain heterogeneity that develops within deformed conglomerate.
Recrystallization textures within quartz-rich pebbles suggest dynamic recrystallization via subgrain rotation and grain boundary migration. Dynamically recrystallized quartz grains have a grain shape preferred orientation, which is parallel to a series of intracrystalline strain features including undulatory extinction, deformation bands, and subgrains. These features are believed to be a manifestation of shearing along a conjugate set of intracrystalline shear planes that appear as deformation lamellae (Brace, 1955). Plastic deformation along these shear planes has developed a grain shape preferred orientation that forms at high angles (45° to 60°) to the foliation plane, rather than parallel to the XY plane of the incremental strain ellipsoid.
Although the Tyson Formation contains more than one tectonic fabric, lattice preferred orientations within quartz-rich domains appear to have formed in response to the second Taconian deformational event of Stanley and Ratcliffe (1985). The crystallographic fabrics show considerable variation on many scales. The distribution of the fabrics relative to local structures show no consistent or predictable relationship.
Fabric variation between the matrix and pebbles is believed to be a manifestation of strain heterogeneity. Shear strain within the matrix is accommodated by grain boundary sliding, therefore only coaxial portions of the strain are recorded by the matrix quartz lattice preferred orientation. Furthermore, strain partitioning, and possibly the lack of extensive recrystallization, has precluded the development of strong lattice preferred orientations in the matrix. Within quartz pebbles, conflicting kinematic indicators, microstructures, and c-axis fabrics indicate strain path partitioning due to rheological variability within a flowing rock mass, which deformed under predominantly coaxial conditions. The asymmetric crystal fabrics in this study are approximately 50% top-to-the- west and 50% top-to-the-east. Additionally, porphyroclasts and mica fish locally suggest either non-coaxial or coaxial deformation, as well as conflicting shear senses.
Deformation probably occurred within the constrictional field, and was locally accommodated by shearing. Kinematic indicators such as mica fish, asymmetric porphyroclast tails, and c-axis fabrics suggest that partitioning occurred not only between pebbles, but within individual pebbles as well. / Master of Science
|
95 |
Experimental simulation of the seismic cycle in fault damage zones / Simulation expérimentale du cycle sismique dans les zones endommagées des faillesAben, Frans 18 November 2016 (has links)
Les séismes le long de grandes failles crustales représentent un danger énorme pour de nombreuses populations. Le mécanique de ces failles est influencé par des zones endommagées qui entourent le coeur de faille. La fracturation dans ces zones contrôle chaque étape du cycle sismique. En effet, cette zone contrôle la mécanique de la rupture sismique, elle est un conduit pour les fluides, réagit chimiquement sous l'effet de fluides réactifs, et facilite la déformation pendant les périodes post- et inter-sismiques. Dans cette thèse de doctorat, des expériences de laboratoire ont été réalisées pour mieux comprendre 1) la façon dont l'endommagement est généré pendant le chargement transitoire co-sismique, 2) comment l'endommagement permet de mieux contraindre le chargement co-sismique le long de grandes failles, et iii) comment les fractures peuvent se cicatriser au fil du temps et contrôler l'évolution de la perméabilité et de la résistance mécanique de la faille.L'introduction de la thèse propose une revue critique de la littérature sur la génération de dommages co-sismiques et en particulier sur la formation des roches pulvérisées. Le potentiel de ces roches comme marqueur des déformations co-sismiques est discuté. Bien que ces roches pulvérisées soient prometteuses pour ces aspects, plusieurs questions restent ouvertes.L'une de ces questions concerne les conditions de chargement transitoire nécessaires pour atteindre la pulvérisation. Le seuil de taux de deformation pour atteindre la pulvérisation peut être réduit par des endommagemments progressifs, au cours de ruptures sismiques successives. Des barres de Hopkinson ont été utilisées pour effectuer des chargements dynamique successifs d'une roche cristalline (monzonite). Les résultats montrent que le seuil pour atteindre la pulvérisation est réduit d'au moins 50% lorsque des chargements successives sont imposés. Cette thèse discute aussi pourquoi les roches pulvérisées sont presque toujours observées dans des roches cristallines et peu dans des roches sédimentaires poreuses. Pour comprendre cette observation, des expériences à haute vitesse de déformation ont été effectuées sur des grès de Rothbach. Les résultats montrent que la pulvérisation des grains eux mêmes ne se produit pas dans les grès. L'endommagement reste se produit principalement à une échelle supérieure à celle grains, et des bandes de compaction sont observées. La compétition entre l'endommagement inter- et intra-granulaire est expliquée par les paramètres microstructuraux en combinant deux modèles micromécaniques classiques. Les microstructures observées dans les grès peuvent se former dans le régime quasi-statiques et aussi dans le régime dynamique. Par conséquent, il est recommandée d'être prudent lors de l'interprétation du mécanisme de deformation dans les roches sédimentaires proches de la surface. La dernière question abordée durant la thèse est la cicatrisation post-sismique de fractures co-sismiques. Des expériences ont été réalisées pour cicatriser des fissures par précipitation de calcite. Le but est l'étude du couplage entre l'augmentation de résistance mécanique de la roche fissurée et l'évolution de la perméabilité. Les échantillons fracturées ont été soumis à des conditions de pression et températures similaires de la croûte supérieure et à une percolation d'un fluide sursaturé en calcite pendant plusieurs mois. Ce couplage non-existe dans les premières étapes de la cicatrisation. Il est révélé par l'imagerie par tomographie aux rayons X que le scellement naissant des fractures se produit dans les porosités situées en aval de barrières d'écoulement, et donc dans des régions qui ne touchent pas les principales voies d'écoulement du fluide. Le découplage entre l'augmentation de résistance de la roche et la perméabilité suggère que les zones d'endommagement peu profondes dans les failles actives peuvent rester des conduits actifs pour les fluides plusieurs années après un séisme. / Earthquakes along large crustal scale faults are a huge hazard threatening large populations. The behavior of such faults is influenced by the fault damage zone that surrounds the fault core. Fracture damage in such fault damage zones influences each stage of the seismic cycle. The damage zone influences rupture mechanics, behaves as a fluid conduit to release pressurized fluids at depth or to give access to reactive fluids to alter the fault core, and facilitates strain during post- and interseismic periods. Also, it acts as an energy sink for earthquake energy. Here, laboratory experiments were performed to come to a better understanding of how this fracture damage is formed during coseismic transient loading, what this fracture damage can tell us about the earthquake rupture conditions along large faults, and how fracture damage is annihilated over time.First, coseismic damage generation, and specifically the formation of pulverized fault damage zone rock, is reviewed. The potential of these pulverized rocks as a coseismic marker for rupture mechanisms is discussed. Although these rocks are promising in that aspect, several open questions remain.One of these open questions is if the transient loading conditions needed for pulverization can be reduced by progressively damaging during many seismic events. The successive high strain rate loadings performed on quartz monzonites using a split Hopkinson pressure bar reveal that indeed the pulverization strain rate threshold is reduced by at least 50%.Another open question is why pulverized rocks are almost always observed in crystalline lithologies and not in more porous rock, even when crystalline and porous rocks are juxtaposed by a fault. To study this observation, high strain rate experiments were performed on porous Rothbach sandstone. The results show that pervasive pulverization below the grain scale, such as observed in crystalline rock, does not occur in the sandstone samples for the explored strain rate range (60-150 s-1). Damage is mainly occurs at a scale superior to that of the scale of the grains, with intragranular deformation occurring only in weaker regions where compaction bands are formed. The competition between inter- and intragranular damage during dynamic loading is explained with the geometric parameters of the rock in combination with two classic micromechanical models: the Hertzian contact model and the pore-emanated crack model. In conclusion, the observed microstructures can form in both quasi-static and dynamic loading regimes. Therefore caution is advised when interpreting the mechanism responsible for near-fault damage in sedimentary rock near the surface. Moreover, the results suggest that different responses of different lithologies to transient loading are responsible for sub-surface damage zone asymmetry.Finally, post-seismic annihilation of coseismic damage by calcite assisted fracture sealing has been studied in experiments, so that the coupling between strengthening and permeability of the fracture network could be studied. A sample-scale fracture network was introduced in quartz monzonite samples, followed exposure to upper crustal conditions and percolation of a fluid saturated with calcite for several months. A large recovery of up to 50% of the initial P-wave velocity drop has been observed after the sealing experiment. In contrast, the permeability remained more or less constant for the duration of the experiment. This lack of coupling between strengthening and permeability in the first stages of sealing is explained by X-ray computed micro tomography. Incipient sealing in the fracture spaces occurs downstream of flow barriers, thus in regions that do not affect the main fluid flow pathways. The decoupling of strength recovery and permeability suggests that shallow fault damage zones can remain fluid conduits for years after a seismic event, leading to significant transformations of the core and the damage zone of faults with time.
|
96 |
Field experiments for fracture characterization: studies of seismic anisotropy and tracer imaging with GPR / Studies of seismic anisotropy and tracer imaging with GPRBonal, Nedra Danielle, 1975- 28 August 2008 (has links)
Knowledge of fracture orientation and density is significant for reservoir and aquifer characterization. In this study, field experiments are designed to estimate fracture parameters in situ from seismic and GPR (radar) data. The seismic experiment estimates parameters of orientation, density, and filling material. The GPR experiment estimates channel flow geometry and aperture. In the seismic study, lines of 2D data are acquired in a vertically fractured limestone at three different azimuths to look for differences in seismic velocities. A sledgehammer, vertical source and a multicomponent, Vibroseis source are used with multicomponent receivers. Acquisition parameters of frequency, receiver spacing and source-to-receiver offset are varied. The entire suite of seismic body waves and Rayleigh waves is analyzed to characterize the subsurface. Alford rotations are used to determine fracture orientation and demonstrate good results when geophone orientation is taken into account. Results indicate that seismic anisotropy is caused by regional faulting. Average fracture density of less than 5% and water table depth estimates are consistent with field observations. Groundwater flow direction has been observed by others to cross the fault trend and is subparallel to a secondary fracture set. In this study, seismic anisotropy appears unrelated to this secondary fracture set. Vp/Vs and Poisson's ratio values indicate a dolomite lithology. Sledgehammer and Vibroseis data provide consistent results. In the GPR experiment, reflection profiles are acquired through common-offset profiling perpendicular to the dominant flow direction. High frequency waves are used to delineate fluid flow paths through a subhorizontal fracture and observe tracer channeling. Channeling of flow is expected to control solute transport. Changes in radar signal are quantitatively associated with changes in fracture filling material from an innovative method using correlation coefficients. Mapping these changes throughout the survey area reveals the geometry of the flow path of each injected liquid. The tracer is found to be concentrated in the center of the survey area where fracture apertures are large. This demonstrates that spatial variations in concentration are controlled by fluid channel geometry.
|
97 |
Seismic characterization of naturally fractured reservoirsBansal, Reeshidev, 1978- 29 August 2008 (has links)
Many hydrocarbon reservoirs have sufficient porosity but low permeability (for example, tight gas sands and coal beds). However, such reservoirs are often naturally fractured. The fracture patterns in these reservoirs can control flow and transport properties, and therefore, play an important role in drilling production wells. On the scale of seismic wavelengths, closely spaced parallel fractures behave like an anisotropic media, which precludes the response of individual fractures in the seismic data. There are a number of fracture parameters which are needed to fully characterize a fractured reservoir. However, seismic data may reveal only certain fracture parameters and those are fracture orientation, crack density and fracture infill. Most of the widely used fracture characterization methods such as Swave splitting analysis or amplitude vs. offset and azimuth (AVOA) analysis fail to render desired results in laterally varying media. I have conducted a systematic study of the response of fractured reservoirs with laterally varying elastic and fracture properties, and I have developed a scheme to invert for the fracture parameters. I have implemented a 3D finite-difference method to generate multicomponent synthetic seismic data in general anisotropic media. I applied the finite-difference algorithm in both Standard and Rotated Staggered grids. Standard Staggered grid is used for media having symmetry up to orthorhombic (isotropic, transversely isotropic, and orthorhombic), whereas Rotated Staggered grid is implemented for monoclinic and triclinic media. I have also developed an efficient and accurate ray-bending algorithm to compute seismic traveltimes in 3D anisotropic media. AVOA analysis is equivalent to the first-order Born approximation. However, AVOA analysis can be applied only in a laterally uniform medium, whereas the Born-approximation does not pose any restriction on the subsurface structure. I have developed an inversion scheme based on a ray-Born approximation to invert for the fracture parameters. Best results are achieved when both vertical and horizontal components of the seismic data are inverted simultaneously. I have also developed an efficient positivity constraint which forbids the inverted fracture parameters to be negative in value. I have implemented the inversion scheme in the frequency domain and I show, using various numerical examples, that all frequency samples up to the Nyquist are not required to achieve desired inversion results.
|
98 |
Modifications structurales du dépôt de sulfures massifs archéen de Grevet, région de Lebel-sur-Quevillon /Lacroix, Jean, January 1992 (has links)
Mémoire (M.Sc.T.)-- Université du Québec à Chicoutimi, 1992. / Bibliogr.: f. 68-73. Document électronique également accessible en format PDF. CaQCU
|
99 |
Permeability evolution in volcanic systems : field, laboratory, and numerical investigations / L'évolution de la perméabilité dans les systèmes volcaniquesFarquharson, James 26 September 2016 (has links)
La perméabilité est une propriété essentielle notamment pour déterminer la nature explosive des volcans, ainsi que pour de nombreuses autres applications scientifiques et industrielles dans les environnements où l'écoulement du fluide est une préoccupation majeure. Combinant des méthodes expérimentales de déformation des roches en laboratoire, des approches de terrain, de la modélisation numérique, et des analyses systématiques de microstructure, ce travail a mis en évidence le caractère complexe de la formation et la destruction des réseaux poreux dans le magma et des roches volcaniques. La compétition entre les processus dilatants (qui augmentent la porosité) et compactants (qui la diminuent) exerce une influence sur les propriétés de transport des fluides à la fois dans le magma et dans la roche volcanique solidifiée. Ces processus incluent la vésiculation et la croissance des bulles dans le conduit, la rupture et la compression du magma, la fracturation issue du refroidissement et fracturation induite par le transport, ainsi que la déformation pendant ou après la mise en place des matériaux, et la densification par frittage. / The permeability of various volcanic materials is an essential parameter governing the explosive behaviour of volcanic systems, as well as being important in many other scientific and industrial applications in environments where fluid flow is a major concern. Combining experimental rock deformation methods with field measurements, numerical modelling, and systematic analyses of rock microstructure, this work explores the complexities involved in the formation and destruction of porous networks in magma and volcanic rocks, addressing how permeability can evolve in volcanic systems. Competition between dilatant processes (which increase porosity) and compactant processes (which decrease porosity) influences the fluid transport properties both in the conduit-dwelling magma and in solidified edifice rock. These processes include (but are not limited to) vesiculation and bubble growth in the conduit, fracture and compaction of magma, post-emplacement thermal or mechanical fracturing, strain-induced deformation, and viscous sintering.
|
100 |
Polyphase deformation and metamorphism in the western Cariboo Mountains near Ogden Park, British ColumbiaLewis, Peter D. January 1987 (has links)
The boundary between the Omineca Belt and the Intermontane Belt in Central British Columbia represents the suture between autochthonous North America (Barkerville Terrane) and several allochthonous terranes accreted from the west In the Quesnel Lake region allochthonous sedimentary and volcanic rocks of Quesnellia Terrane, accreted in the Jurassic, are in sharp tectonic contact with underlying siliclastic and carbonate metasedimentary rocks. The Ogden Peak study area is located 10 km east of and structurally below this suture zone and is thus well situated for observing deformational styles within the autochthonous package. Rocks exposed near Ogden Peak comprise the Hadrynian(?) to Paleozoic(?) Snowshoe Group and local diabasic intrusions. These rocks record a deformational history involving four phases of folding (D₁-D₄) and later brittle faulting (D₅). Earliest recognizable structures consist of recumbant isoclinal folds with a well-developed transposed foliation. This foliation is tightly folded about northwest trending, southwest verging second phase structures. Northwest trending third phase structures and northeast trending fourth phase structures occur as both crenulations and open buckles. Southeast dipping faults cut all earlier structures with tens of meters of normal offset
Phase 1 and Phase 2 fold styles are compatible with a flattened buckle fold mechanism of formation, associated with elevated temperatures and reduced viscosity contrasts across layering. Later fold styles are controlled by higher viscosity contrasts and detachment along layering.
All phases of deformation are dominated by semi-brittle mechanisms of dislocation slip and glide, mechanical twinning, and microcracking. Temperature activated diffusional creep is only locally active and does not contribute appreciably to total strain.
The mineral assemblage garnet-staurolite-kyanite defines a metamorphic peak late in D₂. Metamorphic temperatures of approximately 530° C at 6.0 kb have been determined using garnet/biotite geothermometry. Extensive retrograde metamorphism spans D₃ and D₄, overprinting prograde assemblages and providing evidence for abundant fluids late in deformation.
Late phase 1 diabase dykes locally intruded an area to the southeast of Ogden Peak. Major and trace element analyses of samples from these intrusions suggest a calc-alkaline, volcanic arc affinity. / Science, Faculty of / Earth, Ocean and Atmospheric Sciences, Department of / Graduate
|
Page generated in 0.1172 seconds