Spelling suggestions: "subject:"prof"" "subject:"roof""
1 |
Búsqueda y Visualización de Imágenes en Memoria Chilena: Un enfoque SemánticoSaavedra Céspedes, Felipe Ignacio January 2007 (has links)
No description available.
|
2 |
Etude de systèmes radio sur fibre pour des applications de réseaux domestiques en bande millimétrique / Study of Radio over Fiber systems for home area network applications in the millimeter bandKabalan, Ali 08 July 2016 (has links)
La croissance sans cesse de la demande des débits de données élevés durant ces dernières décennies, soutenue par le déploiement des réseaux optiques permettant un débit de l’ordre de plusieurs Gbit/s a conduit naturellement vers l’intérêt de développement des applications à 60 GHz dans les réseaux locaux. Des normes telles que l’IEEE 802.15.3c et IEEE 802.11ad pour la transmission sans fil en bande millimétrique ont été proposées. A de telles fréquences, les pertes en espace libre sont très élevées et les ondes radios ne traversent pas les murs. Les liaisons radio sur fibre (RoF), utilisées comme déport optique d’une pièce vers une autre, permettent ainsi la distribution des signaux très haut débit dans toute la maison ou dans l’ensemble du bâtiment, en palliant le défaut de faible distance de propagation en espace libre. L’accès, par la modélisation des circuits électriques équivalents de chacun des composants du système considéré, à la simulation de ces systèmes RoF permet une optimisation du système en termes de qualité de transmission. Ainsi, les caractéristiques optiques et électriques des composants constituant les systèmes RoF sont étudiées et analysées conjointement ce qui offre la possibilité de la conception de circuits intégrés photonique-RF. Cette thèse concerne l’étude et simulation des liaisons RoF à l’aide de circuits électriques équivalents de composants photoniques. Cette étude est destinée aux applications sans fil à 60 GHz de grande bande passante permettant un très haut débit de transmission. La technique de modulation d’intensité directe ou externe et détection directe est privilégiée à une fréquence intermédiaire afin d’assurer la simplicité et le bas coût du système. Le signal radio est ensuite transposé sur une porteuse dans la bande 60 GHz. Dans un premier temps, pour valider les modèles des circuits électriques équivalents développés, les caractéristiques mesurées des composants optoélectroniques sont comparées aux résultats de simulation. Ensuite, l’étude de caractérisation est menée à l’échelle système par analyse des paramètres analogiques comme le gain, le bruit et non-linéarité. La dynamique de différentes liaisons RoF peut ainsi être déterminée. La transmission des signaux numériques complexes de type OFDM est finalement réalisée par une méthode de co-simulation numérique/analogique. La qualité de transmission est étudiée par évaluation de l’amplitude du vecteur d’erreur (EVM) des constellations des signaux numériques. L’étude est effectuée et validée dans un premier temps conformément à la norme ECMA-368 dédiée à la bande centimétrique et ensuite étendue à la bande millimétrique conformément à la norme IEEE 802.15.3c. Pour finir, l’effet du canal en espace libre à 60 GHz est considéré afin d’analyser la transmission de bout en bout / The growth continually demand of higher data rates in recent decades, supported by the deployment of optical networks allowing a flow of the order of several Gbit/s naturally leads to application development interest on 60 GHz local networks. Standards such as IEEE IEEE 802.15.3c and 802.11ad for millimeter-band wireless transmission have been proposed. At such frequencies, the free space loss is very high and the radio waves do not penetrate walls. The radio over fiber links (RoF), used as optical link from one room to another and enable the distribution of high-speed signals throughout the home or throughout the building, overcoming the failure for low distance free space propagation. Access, by modeling the electrical equivalent of each component of the system considered circuits, simulation of the RoF systems enables optimization of the system in terms of transmission quality. Thus, the optical and electrical characteristics of components of RoF systems are studied and analyzed together which offers the possibility of designing integrated photonic-RF circuits. This thesis concerns the study and simulation of RoF links using electrical equivalent circuits of photonic components. This study is intended for wireless applications at 60 GHz of bandwidth for a high transmission rate. The modulation technique of direct or external intensity and direct detection is preferred at an intermediate frequency in order to ensure simplicity and low cost of the system. The radio signal is then transposed onto a carrier in the band 60 GHz. First, to validate the models developed electrical equivalent circuit, the measured characteristics of optoelectronic components are compared with simulation results. Then, the characterization study is conducted to the scale by analysis of analog parameters such as gain, noise and non-linearity. The dynamics of different RoF links can thus be determined. Transmitting OFDM complex digital signal is finally achieved by a method of digital / analog co-simulation. The transmission quality has been studied by evaluation of the magnitude of the error vector (EVM) constellations digital signals. The study is conducted and validated as a first step in accordance with the ECMA-368 standard dedicated to the centimetric band and then spread to the millimeter band from IEEE 802.15.3c standard. Finally, the channel effect in free space at 60 GHz is considered to analyze the transmission end to end
|
3 |
Integrated wireless-PON access network architecturesMilosavljevic, Milos January 2011 (has links)
Next generation access networks should be able to cultivate the ongoing evolution in services and applications. Advancements on that front are expected to exhibit the transformation of high definition television (HDTV) and 2D services into ultra-HDTV and individual interactive 3D services. Currently deployed passive optical networks (PONs) have been certified to be able to deliver high quality video and internet services while in parallel broadband wireless standards are increasing their spectral efficiency and subscriber utilisation. Exploiting the benefits of both by providing an integrated infrastructure benefiting from the wireless mobility and ease of scalability and escalating bandwidth of next generation PONs are expected to offer service providers the business models justifying the evolved services. In this direction, this thesis deals with the means of transparent routing of standard worldwide interoperability for microwave access (WiMAX) signal formats over legacy PONs to and from wireless end users based on radio over fibre (RoF). The concept of frequency division multiplexing (FDM) with RoF is used for efficient addressing of individual base stations, bandwidth on-demand provisioning across a cell/sector, simple remote radio heads and no interference with the baseband PON spectrum. Network performance evaluation, initially through simulation, has displayed, in the presence of optical non-linearites and multi-path wireless channels, standard error vector magnitudes (EVMs) at remote radio receivers and bit error rates (BERs) of 1E-4 for typical WiMAX rates bidirectionally. To provide enhanced scalability and dynamicity, a newly applied scheme based on extended wavelength band overlay over the splitter, wireless-enabled PONs has been progressively investigated. This allows for the routing of multiple FDM windows to different wavelengths resulting in significantly reduced optical and electrical component costs and no dispersion compensation over the fibre. This has been implemented through the application of a dense array wave guide grating (AWG) and tuneable filter in the optical line terminal (OLT) and optical network unit/base stations (ONU/BSs) respectively. Although with the use of a splitter the distribution point of the optical network remains largely the same, vertical cavity surface emitting laser (VCSEL) arrays provide colourless upstream transmission. In addition, an overlapping cell concept is developed and adopted for increased wireless spectral efficiency and resilience. Finally, an experimental test-bed using commercially available WiMAX transceivers was produced, which enabled repetition of the simulation outcomes and therefore confirmed the overall network performance.
|
4 |
Numerical Algorithms for Discrete Models of Image DenoisingZhao, Hanqing Unknown Date
No description available.
|
5 |
Numerical Algorithms for Discrete Models of Image DenoisingZhao, Hanqing 11 1900 (has links)
In this thesis, we develop some new models and efficient algorithms for image denoising. The total variation model of Rudin, Osher, and Fatemi(ROF) for image denoising is considered to be one of the most successful deterministic denoising models. It exploits the non-smooth total variation (TV) semi-norm to preserve discontinuities and to keep the edges of smooth regions sharp. Despite its simple form, the TV semi-norm results in a strongly nonlinear Euler-Lagrange equation and poses computational challenge in solving the model efficiently. Moreover, this model produces so-called staircase effect. In this thesis, we propose several new algorithms and models to solve these problems. We study the discretized ROF model and propose a new algorithm which does not involve partial differential equations. Convergence of the algorithm is analyzed. Numerical results show that this algorithm is efficient and stable. We then introduce a denoising model which utilizes high-order difference to approximate piece-wise smooth functions. This model eliminates undesirable staircases, and improves both visual quality and signal-to-noise ratio. Our algorithm is generalized to solve the high-order models. A relaxation technique is proposed for the iteration scheme, aiming to accelerate our solution process. Finally, we propose a method combining total variation and wavelet packets to improve performance on texture-rich images. The ROF model is utilized to eliminate noise, and a wavelet packet transform is used to enhance textures. The numerical results show that the combinational method exploits the advantages of both total variation and wavelet packets. / Mathematics
|
6 |
Deploying Monitoring Trails for Fault Localization in All-optical Networks and Radio-over-Fiber Passive Optical NetworksMaamoun, Khaled M. 24 August 2012 (has links)
Fault localization is the process of realizing the true source of a failure from a set of collected failure notifications. Isolating failure recovery within the network optical domain is necessary to resolve alarm storm problems. The introduction of the monitoring trail (m-trail) has been proven to deliver better performance by employing monitoring resources in a form of optical trails - a monitoring framework that generalizes all the previously reported counterparts. In this dissertation, the m-trail design is explored and a focus is given to the analysis on using m-trails with established lightpaths to achieve fault localization. This process saves network resources by reducing the number of the m-trails required for fault localization and therefore the number of wavelengths used in the network. A novel approach based on Geographic Midpoint Technique, an adapted version of the Chinese Postman’s Problem (CPP) solution and an adapted version of the Traveling Salesman’s Problem (TSP) solution algorithms is introduced. The desirable features of network architectures and the enabling of innovative technologies for delivering future millimeter-waveband (mm-WB) Radio-over-Fiber (RoF) systems for wireless services integrated in a Dense Wavelength Division Multiplexing (DWDM) is proposed in this dissertation. For the conceptual illustration, a DWDM RoF system with channel spacing of 12.5 GHz is considered. The mm-WB Radio Frequency (RF) signal is obtained at each Optical Network Unit (ONU) by simultaneously using optical heterodyning photo detection between two optical carriers. The generated RF modulated signal has a frequency of 12.5 GHz. This RoF system is easy, cost-effective, resistant to laser phase noise and also reduces maintenance needs, in principle. A revision of related RoF network proposals and experiments is also included. A number of models for Passive Optical Networks (PON)/ RoF-PON that combine both innovative and existing ideas along with a number of solutions for m-trail design problem of these models are proposed. The comparison between these models uses the expected survivability function which proved that these models are liable to be implemented in the new and existing PON/ RoF-PON systems. This dissertation is followed by recommendation of possible directions for future research in this area.
|
7 |
Deploying Monitoring Trails for Fault Localization in All-optical Networks and Radio-over-Fiber Passive Optical NetworksMaamoun, Khaled M. 24 August 2012 (has links)
Fault localization is the process of realizing the true source of a failure from a set of collected failure notifications. Isolating failure recovery within the network optical domain is necessary to resolve alarm storm problems. The introduction of the monitoring trail (m-trail) has been proven to deliver better performance by employing monitoring resources in a form of optical trails - a monitoring framework that generalizes all the previously reported counterparts. In this dissertation, the m-trail design is explored and a focus is given to the analysis on using m-trails with established lightpaths to achieve fault localization. This process saves network resources by reducing the number of the m-trails required for fault localization and therefore the number of wavelengths used in the network. A novel approach based on Geographic Midpoint Technique, an adapted version of the Chinese Postman’s Problem (CPP) solution and an adapted version of the Traveling Salesman’s Problem (TSP) solution algorithms is introduced. The desirable features of network architectures and the enabling of innovative technologies for delivering future millimeter-waveband (mm-WB) Radio-over-Fiber (RoF) systems for wireless services integrated in a Dense Wavelength Division Multiplexing (DWDM) is proposed in this dissertation. For the conceptual illustration, a DWDM RoF system with channel spacing of 12.5 GHz is considered. The mm-WB Radio Frequency (RF) signal is obtained at each Optical Network Unit (ONU) by simultaneously using optical heterodyning photo detection between two optical carriers. The generated RF modulated signal has a frequency of 12.5 GHz. This RoF system is easy, cost-effective, resistant to laser phase noise and also reduces maintenance needs, in principle. A revision of related RoF network proposals and experiments is also included. A number of models for Passive Optical Networks (PON)/ RoF-PON that combine both innovative and existing ideas along with a number of solutions for m-trail design problem of these models are proposed. The comparison between these models uses the expected survivability function which proved that these models are liable to be implemented in the new and existing PON/ RoF-PON systems. This dissertation is followed by recommendation of possible directions for future research in this area.
|
8 |
Intégration et supervision des liens Fronthaul dans les réseaux 5G / Fronthaul integration and monitoring in 5G networksTayq, Zakaria 12 December 2017 (has links)
Le Cloud RAN a été préconisé pour la 5G. Cependant, sa mise en place rencontre des difficultés notamment sur l'intégration du fronthaul, ce dernier généralement basé sur l’interface CPRI représente le segment situé entre la Digital Unit et la Radio Unit. Vu les contraintes de débit, de latence et de gigue sur cette interface, le multiplexage en longueur est la solution adéquate pour son transport. En revanche, les technologies radio recommandées pour la 5G augmenteront considérablement les débits CPRI, ce qui rend l’utilisation du WDM bas coût très difficile. Cette thèse traite quatre sujets principaux : L'introduction d'un canal de contrôle dans le CPRI permettrait la supervision de l'infrastructure WDM et l'accordabilité en longueurs d'onde des transceivers. L’impact de l’intégration de ce canal de contrôle dans le fronthaul est étudié dans le chapitre II. La radio analogique sur fibre peut améliorer de manière significative l'efficacité spectrale du fronthaul, permettant potentiellement le transport des interfaces 5G. Une étude approfondie sur le gain réel apporté par cette solution est rapportée dans le chapitre III. La compression du CPRI basée sur la quantification uniforme et non uniforme est également une solution pour améliorer l'efficacité spectrale du CPRI. Le chapitre IV démontre expérimentalement les taux de compression réalisables. Enfin, les nouveaux splits fonctionnels sont considérés comme une solution prometteuse pour la 5G. Deux nouvelles interfaces ont été identifiées pour les splits couche haute et couche basse. Une étude théorique et expérimentale de ces nouvelles interfaces est présentée dans le chapitre V. / Cloud Radio Access Network (RAN) was identified as a key enabler for 5G. Its deployment is however meeting multiple challenges notably in the fronthaul integration, the latter being the segment located between the Digital Unit and the Radio Unit generally based on CPRI. Giving its bit-rate, latency and jitter constrains, Wavelength Division Multiplexing (WDM) is the most adequate solution for its transport. However, the radio technologies recommended for 5G will drastically increase the CPRI bit-rate making its transport very challenging with low-cost WDM. This thesis deals with four main topics : The introduction of a control channel in the CPRI enables offering the WDM infrastructure monitoring and the wavelength tunability in the transceivers. The study of this control channel integration in the fronthaul link is reported in the second chapter as well as an investigation on the wireless transmission of CPRI. The use of Analog Radio over Fiber (A-RoF) can significantly improve the fronthaul spectral efficiency compared to CPRI-based fronthaul enabling, potentially, the transport of 5G interfaces. A thorough investigation on the actual gain brought by this solution is stated in the third chapter. CPRI compression based on uniform and non-uniform quantization is also a solution to enhance the CPRI spectral efficiency. The fourth chapter describes this solution and experimentally shows the achievable compression rates. Finally, establishing a new functional split in the radio equipment was considered as a promising solution for 5G. Two new interfaces have been identified for high and low layer functional splits. A theoretical and experimental study of these new interfaces is reported in the fifth chapter.
|
9 |
SiGe/Si Microwave Photonic devices and Interconnects towards Silicon-based full Optical Links / SiGe / Si micro-ondes photoniques Phototransistors et interconnexions vers Silicon-base tous les liens optiquesTegegne, Zerihun 11 May 2016 (has links)
Avec la croissance forte de ces dernières années des objets connectés les technologies de communication optique et radio voient davantage d’opportunités de s’associer et se combiner dans des technologies bas-couts Photoniques-Microondes (MWP). Les réseaux domestiques en sont un exemple. La bande millimétrique notamment, de 57GHz à 67GHz, est utilisé pour contenir les exigences des communications sans fils très haut-débit, néanmoins, la couverture de ces systèmes wireless est limitée en intérieur (indoor) essentiellement à une seule pièce, à la fois du fait de l’atténuation forte de l’atmosphère dans cette bande de fréquence, mais aussi de fait de l’absorption et de la réflexion des murs. Ainsi il nécessaire de déployer une infrastructure pour diffuser l’information au travers d’un système d’antennes distribuées. Les technologiques optiques et photoniques-microondes sont une des solutions envisagées. Les technologies MWP se sont également étendues et couvrent une gamme très large d’applications incluant les communications mobiles 5G, les analyses biomédicales, les communications courtes-distances (datacom), le traitement de signal par voie optique et les interconnexions dans les véhicules et aéronefs. Beaucoup de ces applications requièrent de la rapidité, de la bande-passante et une grande dynamique à la fois, en même temps de demander des dispositifs compacts, légers et à faible consommation. Le cout d’implémentation est de plus un critère essentiel à leur déploiement, en particulier dans l’environnement domestique ainsi que dans d’autres applications variées des technologies MWP.Ce travail de thèse vise ainsi le développement de composants photonique-microondes (MPW) intégrés en technologie BiCMOS ou Bipolaire SiGe/Si, à très bas coût, incluant les phototransistors bipolaires à hétérojonctions (HPT) SiGe/Si, les Diodes Electro-Luminescentes (LED) Si et SiGe, ainsi que l’intégration combinées des composants optoélectroniques et microondes, pour l’ensemble des applications impliquant des courtes longueurs d’ondes (de 750nm à 950nm typiquement).Ces travaux se concentrent ainsi sur les points suivants :La meilleure compréhension de phototransistors SiGe/Si latéraux et verticaux conçus dans une technologie HBT SiGe 80GHz de Telefunken GmbH. Nous traçons des conclusions sur les performances optimales du phototransistor. Les effets de photodétection du substrat et de la dispersion spatiale des flux de porteurs sont analysés expérimentalement. Cette étude aide à développer des règles de dessin pour améliorer les performances fréquentielles du phototransistor HPT pour les applications visées.Dans l’objectif de développer de futures interconnexions intra- et inter- puces, nous concevons des lignes de transmissions faibles-pertes et des guides d’ondes optiques polymères sur Silicium faible résistivité. Il s’agit d’une étape afin d’envisager des plateformes Silicium dans lesquelles les HPT SiGe pourront potentiellement être intégrés de manière performante à très bas coût avec d’autres structures telles que des lasers à émission par la surface (VCSEL), afin de construire un transpondeur optique complet sur une interface Silicium. Le polymère est utilisé comme une interface diélectrique entre les lignes de transmission et le substrat, pour les interconnexions électriques, et pour définir le gain du guide d’onde optique dans les interconnexions optiques.La conception, la fabrication et la caractérisation du premier lien photonique-microonde sur puce Silicium sont menées en se basant sur la même technologie HBT SiGe 80GHz de Telefunken dans la gamme de longueur d’onde 0,65µm-0,85µm. Ce lien optique complétement intégré combine des LEDS Silicium en régime d’avalanche (Si Av LED), des guides d’ondes optiques Nitrure et Silice ainsi qu’un phototransistor SiGe. Un tel dispositif pourrait permettre d’accueillir à l’avenir des communications sur-puce, de systèmes micro-fluidiques et des applications d’analyse biochimiques / With the recent explosive growth of connected objects, for example in Home Area Networks, the wireless and optical communication technologies see more opportunity to merge with low cost MicroWave Photonic (MWP) technologies. Millimeter frequency band from 57GHz to 67GHz is used to accommodate the very high speed wireless data communication requirements. However, the coverage distance of these wireless systems is limited to few meters (10m). The propagation is then limiting to a single room mostly, due to both the high propagation attenuation of signals in this frequency range and to the wall absorption and reflections. Therefore, an infrastructure is needed to lead the signal to the distributed antennas configuration through MWP technology. Moreover, MWP technology has recently extended to address a considerable number of novel applications including 5G mobile communication, biomedical analysis, Datacom, optical signal processing and for interconnection in vehicles and airplanes. Many of these application areas also demand high speed, bandwidth and dynamic range at the same time they require devices that are small, light and low power consuming. Furthermore, implementation cost is a key consideration for the deployment of such MWP systems in home environment and various integrated MWP application.This PhD deals with very cheap, Bipolar or BiCMOS integrated SiGe/Si MWP devices such as SiGe HPTs, Si LEDs and SiGe LEDs, and focused on the combined integration of mm wave and optoelectronic devices for various applications involving short wavelength links (750nm to 950nm).This research focused on the study of the following points:The better understanding of vertical and lateral illuminated SiGe phototransistors designed in a 80 GHz Telefunken GmbH SiGe HBT technology. We draw conclusions on the optimal performances of the phototransistor. The light sensitive Si substrate and two-dimensional carrier flow effects on SiGe phototransistor performance are investigated. This study helps to derive design rules to improve frequency behavior of the HPT for the targeted applications.For future intra /inter chip hybrid interconnections, we design polymer based low loss microwave transmission lines and optical waveguides on low resistive silicon substrate. It is a step to envisage further Silicon based platforms where SiGe HPT could be integrated at ultra-low cost and high performances with other structures such high-speed VCSEL to build up a complete optical transceiver on a Silicon optical interposer. The polymer is used as dielectric interface between the line and the substrate for electrical interconnections and to design the core and cladding of the optical waveguide.The design, fabrication and characterization of the first on-chip microwave photonic links at mid infrared wavelength (0.65-0.85μm) based on 80 GHz Telefunken GmbH SiGe HBT technological processes. The full optical link combines Silicon Avalanche based Light Emitting Devices (Si Av LEDs), silicon nitride based waveguides and SiGe HPT. Such device could permit hosting microfluidic systems, on chip data communication and bio-chemical analysis applications
|
10 |
Deploying Monitoring Trails for Fault Localization in All-optical Networks and Radio-over-Fiber Passive Optical NetworksMaamoun, Khaled M. January 2012 (has links)
Fault localization is the process of realizing the true source of a failure from a set of collected failure notifications. Isolating failure recovery within the network optical domain is necessary to resolve alarm storm problems. The introduction of the monitoring trail (m-trail) has been proven to deliver better performance by employing monitoring resources in a form of optical trails - a monitoring framework that generalizes all the previously reported counterparts. In this dissertation, the m-trail design is explored and a focus is given to the analysis on using m-trails with established lightpaths to achieve fault localization. This process saves network resources by reducing the number of the m-trails required for fault localization and therefore the number of wavelengths used in the network. A novel approach based on Geographic Midpoint Technique, an adapted version of the Chinese Postman’s Problem (CPP) solution and an adapted version of the Traveling Salesman’s Problem (TSP) solution algorithms is introduced. The desirable features of network architectures and the enabling of innovative technologies for delivering future millimeter-waveband (mm-WB) Radio-over-Fiber (RoF) systems for wireless services integrated in a Dense Wavelength Division Multiplexing (DWDM) is proposed in this dissertation. For the conceptual illustration, a DWDM RoF system with channel spacing of 12.5 GHz is considered. The mm-WB Radio Frequency (RF) signal is obtained at each Optical Network Unit (ONU) by simultaneously using optical heterodyning photo detection between two optical carriers. The generated RF modulated signal has a frequency of 12.5 GHz. This RoF system is easy, cost-effective, resistant to laser phase noise and also reduces maintenance needs, in principle. A revision of related RoF network proposals and experiments is also included. A number of models for Passive Optical Networks (PON)/ RoF-PON that combine both innovative and existing ideas along with a number of solutions for m-trail design problem of these models are proposed. The comparison between these models uses the expected survivability function which proved that these models are liable to be implemented in the new and existing PON/ RoF-PON systems. This dissertation is followed by recommendation of possible directions for future research in this area.
|
Page generated in 0.0478 seconds