The aim of this diploma's thesis is to develop design documents for a building construction of a winery guesthouse in a cadastral territory of a village Milotice u Kyjova. The house is situated in the existing built-up area intended for winery cellars near of the village. Plots, where building is situated are sloping and object is embedded into the terrain. The proposition and the design of the building respect a commune plan of village Milotice. The project designs the new basement building of the winery guesthouse with 2 above ground floors, where are situated hotel rooms with a total capacity of 63 guests and accommodation facilities. In the basement is situated restaurant with facilities, social space, wellness with a whirlpool, massages, sauna and solarium. A structural system of the building is designed like a wall and brick structural system from concrete brickwork in the basement and the lime sand brickworks in the above ground floors. A roof is designed partly as a saddle roof with slope 22° and 24,3° and partly as a green roof with a roof terrace.

The subject of the diploma thesis is new stand-alone hotel with a catering service and a relaxation zone including a fitness room, a table tennis room, massages and a solarium. The individual functional parts are separated and can be operated independently of each other. The Building consists of three floors. The ground floor will serve to run a restaurant with a background and a for relaxation zone, the remaining two floors will be used to accommodate guests and the necessary facilities. The maximum capacity for the accommodation is 59 people and requires four employees to operate it. The restaurant is designed for 81 guests and a total of 7 employees. The relaxation part is for guests only and is not accessible to other people. The structure is based on strip foundations from plain concrete and reinforced concrete foundation footing. Peripheral vertical load-bearing structures of the first above-ground floor are designed from permanent formwork system, all others loadbearing walls will be walled-up from vertically perforated block laid on thin-film adhesive. The floor structures are designed as an assembly of prestressed hollow core slabs. Roofing of the building will be made as a flat vegetation roof.

This master's thesis deals with the design and implementation of optimization and monitoring of the server room. Optimization consists in designing access system and server room temperature measurement, automatic infrastructure start-up and power management, server and network infrastructure optimization, server virtualization management and network monitoring.

The subject of my diploma thesis is to create a design documentation of new building of kindergarten. Designed building is located in Náměšť nad Oslavou. This building is situated in location of new family houses on a slightly sloping land. Kindergarten is determined for upbringing and education of 66 children, divided into three separate sections, in the building is included place for hobby (common room). In the south side of the land is situated large school garden. Kindergarten is designed as separately standing building, with two above-ground floors and has no cellar. The construction system of the object is wall system, walled from ceramic blocks, the horizontal load-bearing constructions are made of prestressed reinforced concrete panels. The stairscase is designed from reinforced concrete. The building is roofed with single layer flat roof and is foundated on strip foundation.

The Swedish welfare society can be advocated as a social safety net with the intention of giving citizens fair living conditions. However, the welfare system has recently undergone fundamental changes regarding its organization and steering within the social image work, where its impact is considered to have received far too little attention.  The overall purpose of the study is to study social workers 'experiences of steering within the social services' exercise of authority. The empirical data has been considered in qualitative interviews and has brought significant knowledge and information about the subject area. The results have shown an overall control within the social authority work, which normalizes and constitutes an impact on how the practical work is conducted and how the feeling of the social work is treated. However, the results of the study have shown various causal explanations that are rooted in trust from the management team, work motives and also the social worker's individual professional experience and competence. Based on the study's analysis, four central themes have been identified and presented as both causal explanations and prerequisites for practical social authority work. These are explained as; steering and the social secretary's work situation, trust-based governance, social work - a knowledge-based practice and steering as instruments. / Det svenska välfärdssamhället kan hävdas inbegripa som ett socialt skyddsnät med intention av att medborgarna får skäliga levnadsförhållanden. Välfärdsystemet har dock på senare tid genomgått grundläggande förändringar avseende dess organisering och styrning inom det sociala myndighetsarbetet, där dess påverkan allt för lite anses uppmärksammats. Studiens övergripande syfte är att studera socialarbetares upplevelser av styrning inom socialtjänstens myndighetsutövning. Empirin utgörs av kvalitativa intervjuer och har bringat betydande kunskaper och belysning av ämnesområdet. Resultatet har påvisat en överlagd styrning inom det sociala myndighetsarbetet, som normaliserats och utgör påverkan på hur det praktiska arbetet bedrivs och hur känslan av det sociala arbetet behandlas. Vidare har studiens resultat påvisat diverse orsaksförklaringar som bottnar i konstadsfrågor, tillit från ledningsgruppen, arbetsmotiv men också socialsekreterares individuella yrkeserfarenhet- och kompetens. Utifrån studiens analys har fyra centrala teman identifierats och framställts som både orsaksförklaring och förutsättning för ett praktiskt socialt myndighetsarbete. Dessa förklaras som; styrning och socialsekreterares arbetssituation, brist på tillit, socialt arbete – en kunskapsbaserad praktik och styrning som instrument.

This work deals with a computer simulation of an acoustic room using its impulse response. Two different approaches to the simulation are described with their pros and cons and then the work is focused on the physical approach, which uses room’s impulse response during the simulation. Several methods for the extraction of the impulse response of the acoustic room are mentioned with their conditions of use. The detailed description of various algorithms for a real time convolution computing is followed by the cost analysis of frequency domain block convolution algorithms. Several algorithms are chosen, implemented and tested in Matlab environment. Then the most effective of them is chosen to be implemented in VST technology as the plug in module for real time room simulation.

Most acoustic measurements and parameters provided by a manufacturer of acoustic elements, which are offering additional solutions to room acoustics as well as acoustic construction works, are mainly limited to the parameters associated with absorption of individual elements. Until now, these diffusional elements have been neglected. Diffusi- onal panels are used to e.g. eliminate direct reflection of sound waves to the listener or reflection of sound waves concentrated at one point. Combination of absorptive acoustic panels and diffusion elements results in a space that is customised to the submitter’s needs.

This diploma thesis deals with a part of synchronous generator testing stand project. Thesis is focused on drive part of testing stand, the appropriate drive is chosen according to type of the tests. The attention is mainly on drive control, specifically on the configuration of frequency converter and software programming of the converter control in NI LabVIEW. Software also contains drive simulation program. Testing stands are sequentially installed and commissioned.

This diploma thesis concerns in the first part on conditions for creating of nursery for the company in Czech Republic. It also analyses current positon and interest in the nursery located in Brno. In the conclusion I suggest steps which should lead into the fair creating in case of satisfied conditions.

The new building of Sport and Relaxation Centre with the possibility of accommodation is situated on the vacant site in Blansko. Under the three storey building partialy runs basement. On the ground floor is located a restaurant with facilities, also rooms for sport and relaxation. On the second and the third floor is the centre’s accommodation with a total capacity of 38 persons. In the basement are mainly storerooms and utility rooms. The building is made of ceramic bricks. The ceiling construction is monolithic and the building has a flat roof. The building is constructed on footing foundations and strip foundations.