The quest to answer fundamental questions and solve complex problems is a principal tenet of Earth science. The pursuit of scientific knowledge has generated profuse research, resulting in a plethora of information-rich resources. This phenomenon offers great potential for scientific discovery. However, a deficiency in information connectivity and processing standards has become evident. This deficiency has resulted in a demand for tools to facilitate and process this upsurge in information. This ontology project is an answer to the demand for information processing tools. The primary purpose of this domain-specific ontology and knowledge base is to organize, connect, and correlate research data related to brittle deformation microstructures. This semantically enabled ontology may be queried to return not only asserted information, but inferred knowledge that may not be evident. In addition, its standardized development in OWL-DL (Web Ontology Language-Description Logic) allows the potential for sharing and reuse among other geologic science communities.

As increasing emphasis is placed upon the role surface processes play in regulating tectonic behaviour, the need for accurate measurements of denudation rate has become paramount. The quantity and quality of denudation rate studies has grown with the advent of cosmogenic radionuclide techniques, capable of recording denudation rates over timescales of 100 to 1000000 years. This study seeks to utilise cosmogenic 10Be concentrations measured in alluvial sediments in order to further develop this method and to investigate rates of basin-wide denudation in the San Bernardino Mountains, an active orogen associated with the San Andreas Fault system. The theory which underpins measurements of basin-wide denudation rates with cosmogenic radionuclide analysis is evaluated in light of recent understanding of production mechanisms. Field testing of the assumptions required by the basinwide denudation rate model highlights the importance of sampling thoroughly mixed sediments. Denudation rates ranging over three orders of magnitude are measured by applying the cosmogenic radionuclide technique in thirty-seven basins throughout the San Bernardino Mountains. Results show a relationship between denudation rate and slope which provides quantification of the threshold slope angle in high relief granitic environments and suggests tectonic activity is the first order control of denudation rates in these mountains. Mean annual precipitation is shown to exert no significant influence over the rates measured in the San Bernardino Mountains. Questions concerning denudation rates recorded over differing timespans are addressed using the cosmogenic technique, (U-Th)/He thermochronometry, incision into dated horizons and modern day sediment flux data. This comparison reveals that a decrease in rates with distance from the San Andreas Fault has been consistent throughout the lifespan of the San Bernardino Mountains and provides further evidence that a tectonic mechanism is driving denudation in this region. The relevance of both spatial and temporal scale in geomorphic studies is considered in light of these results, highlighting the need for a greater appreciation of their role in the interpretation of basin-wide denudation rates.

abstract: The San Andreas Fault (SAF) is the primary structure within a system of faults accommodating motion between the North American and Pacific plates. Physical models of faulting and characterizations of seismic hazard are informed by investigations of paleoseismology, slip distribution, and slip rate. The impact of earthquakes on people is due in large part to social vulnerability. This dissertation contributes an analysis about the relationships between earthquake hazard and social vulnerability in Los Angeles, CA and investigations of paleoseismology and fault scarp array complexity on the central SAF. Analysis of fault scarp array geometry and morphology using 0.5 m digital elevation models along 122 km of the central SAF reveals significant variation in the complexity of SAF structure. Scarp trace complexity is measured by scarp separation, changes in strike, fault trace gaps, and scarp length per SAF kilometer. Geometrical complexity in fault scarp arrays indicates that the central SAF can be grouped into seven segments. Segment boundaries are controlled by interactions with subsidiary faults. Investigation of an offset channel at Parkfield, CA yields a late Holocene slip rate of 26.2 +6.4/- 4.3 mm/yr. This rate is lower than geologic measurements on the Carrizo section of the SAF and rates implied by far-field geodesy. However, it is consistent with historical observations of slip at Parkfield. Paleoseismology at Parkfield indicates that large earthquakes are absent from the stratigraphic record for at least a millennia. Together these observations imply that the amount of plate boundary slip accommodated by the main SAF varies along strike. Contrary to most environmental justice analyses showing that vulnerable populations are spatially-tied to environmental hazards, geospatial analyses relating social vulnerability and earthquake hazard in southern California show that these groups are not disproportionately exposed to the areas of greatest hazard. Instead, park and green space is linked to earthquake hazard through fault zone regulation. In Los Angeles, a parks poor city, the distribution of social vulnerability is strongly tied to a lack of park space. Thus, people with access to financial and political resources strive to live in neighborhoods with parks, even in the face of forewarned risk. / Dissertation/Thesis / Ph.D. Geological Sciences 2011

This study of alluvial aquifer basins in southern California is centered on observations of differential surface displacement and the search for the mechanisms of deformation. The San Bernardino basin and the Upper Coachella Valley aquifers are bound by range fronts and fault segments of the southern San Andreas fault system. I have worked to quantify long-term compaction in these groundwater dependent population centers with a unique synthesis of data and methodologies using Interferometric Synthetic Aperture Radar (InSAR) and groundwater data. My dissertation contributes to the understanding of alluvial aquifer heterogeneity and partitioning. I model hydrogeologic and tectonic interpretations of deformation where decades of overdraft conditions and ongoing aquifer development contribute to extreme rapid subsidence. I develop the Hydrogeologic InSAR Integration (HII) method for the characterization of surface deformation in aquifer basins. The method allows for the separation of superimposed hydraulic and/or tectonic processes in operation. This formalization of InSAR and groundwater level integration provides opportunities for application in other aquifer basins where overdraft conditions may be causing permanent loss of aquifer storage capacity through compaction. Sixteen years of SAR data for the Upper Coachella Valley exhibit rapid vertical surface displacement (#8804; 48mm/a) in sharply bound areas of the western basin margin. Using well driller logs, I categorize a generalized facies analysis of the western basin margin, describing heterogeneity of the aquifer. This allowed for assessment of the relationships between observed surface deformation and sub-surface material properties. Providing the setting and context for the hydrogeologic evolution of California's primary aquifers, the mature San Andreas transform fault is studied extensively by a broad range of geoscientists. I present a compilation of observations of creep, line integrals across the Pacific-North America Plate Boundary, and strain tensor volumes for comparison to the Working Group 2007 (UCERF 2) seismicity-based deformation model. I find that the moment accumulation across the plate boundary is consistent with the deformation model, suggesting fault displacement observations within the plate boundary zone accurately capture the strain across the plate boundary. This dissertation includes co-authored materials previously published, and also includes unpublished work currently under revisions for submission to a technical journal.

Sedimentary rocks in the Mecca Hills record a 3-4 Myr history of basin evolution and deformation within the southern San Andreas fault (SAF) zone. Detailed geologic mapping, measured sections, lithofacies analysis, and preliminary paleomagnetic data indicate that sedimentation and deformation in the Mecca Hills resulted from evolution of local fault zone complexities superimposed on regional subsidence and uplift. Sediment was derived from sources northeast of the SAF and transported southeast along the fault zone in large rivers, alluvial fans, and a smaller fault-bounded lake. Inversion of the Painted Canyon fault from oblique SW-side down to SW-side up slip was the main control on local deposition and deformation. Regional controls are suggested by an angular unconformity observed in the Mecca and Indio Hills along ~50 km of the SAF and synchronous post-740 ka uplift northeast of the SAF along ~80 km of the fault zone.

Damage zones adjacent to or associated with faults are important to the geologic community because of their implications to hazards and their ability to preserve evidence for, and show history of, slip, fluid flow, and deformation associated with large strike-slip faults. We examine two fault zones in southern California where fault zone damage is expressed. We revisit the drilled crystalline core from the Cajon Pass California drill hole, 4 km northeast of the San Andreas fault (SAF), and 1 km north of the Cleghorn fault, to perform a systematic structural analysis of deformation and alteration associated with strike-slip faulting at the site. The core preserved 19 fault zones, 11 of which were not previously identified. The most significant fault is a fully intact steep-dipping fault zone at 3,402 m depth with potassium feldspar and epidote alteration. This fault correlates well with the nearby left-lateral Cleghorn fault. The extent of deformation varies within the core, and is controlled by the size of the fault zones intersected by the core. The extent of deformation varies and is controlled by the size of the faults the core intersected. We also examined the nature of right separation across the Clark fault damage zone along the Santa Rosa segment using a marker assemblage of biotite, hornblende-bearing tonalite - marble - bearing metasedimentary rocks - migmatite located in Coyote Mountain and the southeast Santa Rosa Mountains. Separation measured from this study is 16.8 km + 3.67 km / -6.03 km. Our measurement uses the updated location of the Clark fault in Clark Lake Valley and matches a distinctive lithologic contact across the fault instead of matching the diffuse western boundary of the Eastern Peninsular mylonite zone as previously used. We calculate the errors associated with projecting the contacts across Quaternary cover to the trace of the Clark fault, and consider a range of projections. Additional strain may have been accommodated in folds and small faults within the damage zone of the San Jacinto fault zone. Two large map-scale folds deform the marker assemblage near the San Jacinto fault zone and we tested whether Cretaceous ductile deformation or brittle late Quaternary right slip produced the folds.

The aim of the San Andreas Fault Observatory at Depth (SAFOD) project, a component of the NSF Earthscope Initiative, is to directly observe active fault processes at seismogenic depths through the drilling of a 3 km deep (true vertical depth) inclined borehole across San Andreas fault. Preliminary subsurface models based on surface mapping and geophysical data predicted different lithologies than were actually encountered. At 1920 meters measured depth (mmd), a sequence of well-indurated, interbedded arkosic conglomerates, sandstones, and siltstones was encountered. We present a detailed lithologic and structural characterization as a step toward understanding the complex geologic history of this fault-bounded block of arkosic sedimentary rocks. We divide the arkosic section into three lithologic units with different compositional, structural, and sedimentary features: the upper arkose, 1920-2530 mmd, the clay-rich zone, 2530-2680 Illtlld, and the lower arkose, 2680-3150 mmd. We interpret the section to have been deposited in a Salinian transtensional basin, in either a subaqueous or subaerial fan setting. We suggest four different possibly equivalent sedimentary units to the SAFOD arkoses, the locations of which are dependent on how the San Andreas fault system has evolved over time in the vicinity of the SAFOD site. Detailed analysis of three subsidiary faults encountered in the arkosic section at 1920 mmd, 2530 mmd, and 3060 mmd, shows that subsurface faults have similar microstructures and composition as exhumed faults at the surface, with less evidence of alteration from extensive fluid flow.

The launch of Sentinel-1A/B satellites in 2014 and 2016 marked a pivotal moment in Synthetic Aperture Radar (SAR) technology, ushering in a golden era for SAR. With a revisit time of 6–12 days, these satellites facilitated the acquisition of extensive stacks of high-resolution SAR images, enabling advanced time series analysis. However, processing these stacks posed challenges like interferometric phase degradation and tropospheric phase delay. This study introduces an advanced Small Baseline Subset (SBAS) algorithm that optimizes interferometric pairs, addressing systematic errors through dyadic downsampling and Delaunay Triangulation. A novel statistical framework is developed for elite pixel selection, considering distributed and permanent scatterers, and a tropospheric error correction method using smooth 2D splines effectively identifies and removes error components with fractal-like structures. Beyond geodetic technique advancements, the research explores geological phenomena, detecting five significant slow slip events (SSEs) along the Southern San Andreas Fault using multitemporal SAR interferometric time series from 2015-2021. These SSEs govern aseismic slip dynamics, manifesting as avalanche-like creep rate variations. The study further investigates Managed Aquifer Recharge (MAR) as a nature-engineering-based solution in the Santa Ana Basin. Analyzing surface deformation from 2004 to 2022 demonstrates MAR's effectiveness in curbing land subsidence within Orange County, CA. Additionally, MAR has the potential to stabilize nearby faults by inducing a negative Coulomb stress change. Projecting into the future, a suggested 2% annual increase in recharge volume through 2050 could mitigate land subsidence and reduce seismic hazards in coastal cities vulnerable to relative sea level rise. This integrated approach offers a comprehensive understanding of geological processes and proposes solutions to associated risks. / Doctor of Philosophy / The launch of Sentinel-1A/B satellites in 2014 and 2016 marked a big step forward in radar technology, especially Synthetic Aperture Radar (SAR). These satellites, which revisit the same area every 6-12 days, allowed us to collect many high-quality radar images. This helped us study changes over time in a more advanced way. However, there were challenges in handling all these images, like errors in the radar signals and delays caused by the Earth's atmosphere. We devised a smart algorithm based on the Small Baseline Subset (SBAS) to tackle these challenges. It helps optimize how we use pairs of radar images, reducing errors. We also developed a new method to pick the best pixels in the images and corrected errors caused by the atmosphere using mathematical methods. Moving beyond just technology, our research also looked at interesting Earth events. We found five major slow slip events along the Southern San Andreas Fault by studying radar data from 2015 to 2021. These events are like slow-motion slips along the fault, influencing how the ground moves. We also explored Managed Aquifer Recharge (MAR) as a solution in the Santa Ana Basin. By studying ground movement from 2004 to 2022, we found that MAR helped prevent the land from sinking in Orange County, California. It even has the potential to make nearby faults more stable. Looking ahead, increasing MAR activities by 2% each year until 2050 could protect against land sinking and reduce earthquake risks in coastal cities facing rising sea levels. This combined approach gives us a better understanding of Earth's processes and suggests ways to tackle related problems.

The Pacific-North American plate boundary is typified by transpression and convergence, yet the relationship between interplate deformation and long-term crustal shortening is not fully understood. The continuous belt of rugged topography that extends along the entire plate boundary is generally associated with oblique tectonic plate motion, strong interplate coupling, and terrane accretion, but relating plate boundary orogenesis to variations in plate geometry and behavior requires detailed case studies. The northern San Gabriel Mountains along the San Andreas fault and the Chugach-Kenai Mountains above the Aleutian subduction zone are located along highly tectonically active sections of the Pacific-North American plate boundary and have not been studied from the context of long-term landscape development. To determine whether mountain building along these sections of the plate boundary reflects recent, rapid exhumation as observed in bordering mountain belts, low-temperature thermochronometry and topographic analyses were applied to each area. In the northern San Gabriel Mountains, apatite (U-Th)/He ages are >10 Ma along narrow crystalline ridges topped by low-slope erosional surfaces located within ~5 km of the San Andreas fault zone. In the Chugach-Kenai Mountains, the youngest apatite (U-Th)/He ages (~5 Ma) are an order of magnitude older than those from the Yakutat collision zone to the east, despite the presence of a continuous swath of glaciated, rugged topography between the two areas. Exhumation rates inferred from these ages are <1 mm/yr, suggesting that there has been minimal recent denudation in the northern San Gabriel and Chugach-Kenai Mountains. The lack of evidence for recent mountain building in both of these case studies implies that interplate deformation is heterogeneous and that other factors (secondary structures, climate) besides plate kinematics and topographic character must be considered for understanding landscape development. / Ph. D.

abstract: The movement between tectonic plates is accommodated through brittle (elastic) displacement on the plate boundary faults and ductile permanent deformation on the fault borderland. The elastic displacement along the fault can occur in the form of either large seismic events or aseismic slip, known as fault creep. Fault creep mainly occurs at the deep ductile portion of the crust, where the temperature is high. Nonetheless, aseismic creep can also occur on the shallow brittle portion of the fault segments that are characterized by frictionally weak material, elevated pore fluid pressure, or geometrical complexity. Creeping segments are assumed to safely release the accumulated strain(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992) on the fault and also impede propagation of the seismic rupture. The rate of aseismic slip on creeping faults, however, might not be steady in time and instead consist of successive periods of acceleration and deceleration, known as slow slip events (SSEs). SSEs, which aseismically release the strain energy over a period of days to months, rather than the seconds to minutes characteristic of a typical earthquake, have been interpreted as earthquake precursors and as possible triggering factor for major earthquakes. Therefore, understanding the partitioning of seismic and aseismic fault slip and evolution of creep is fundamental to constraining the fault earthquake potential and improving operational seismic hazard models. Thanks to advances in tectonic geodesy, it is now possible to detect the fault movement in high spatiotemporal resolution and develop kinematic models of the creep evolution on the fault to determine the budget of seismic and aseismic slip. In this dissertation, I measure the decades-long time evolution of fault-related crustal deformation along the San Andrea Fault in California and the northeast Japan subduction zone using space-borne geodetic techniques, such as Global Positioning System (GPS) and Interferometric Synthetic Aperture Radar (InSAR). The surface observation of deformation combined with seismic data set allow constraining the time series of creep distribution on the fault surface at seismogenic depth. The obtained time-dependent kinematic models reveal that creep in both study areas evolves through a series of SSEs, each lasting for several months. Using physics-based models informed by laboratory experiments, I show that the transient elevation of pore fluid pressure is the driving mechanism of SSEs. I further investigate the link between SSEs and evolution of seismicity on neighboring locked segments, which has implications for seismic hazard models and also provides insights into the pattern of microstructure on the fault surface. I conclude that while creeping segments act as seismic rupture barriers, SSEs on these zones might promote seismicity on adjacent seismogenic segments, thus change the short-term earthquake forecast. / Dissertation/Thesis / Doctoral Dissertation Geological Sciences 2018