No description available.

Pre-cellularised scaffolds are limited in volume due to the constraints of the time delay required for angiogenic cells ingrowth forming a vascular network and allowing for delivery of nutrients and waste exchange. Channels have the potential to improve the time taken for cellular penetration. The effectiveness of channels in improving angiogenic cells penetration was assessed in vitro and in vivo in porous 3-D collagen scaffolds. Initial studies conducted in vitro demonstrated that the scaffolds supported angiogenic cells ingrowth in culture and the channels improved the depth of penetration of cells into the scaffold. The cells reside mainly around the channels and migrate along the channels. In vivo, channels increased cell migration into the scaffolds and in particular angiogenic cells resulting in a clear branched vascular network of micro vessels in the channelled samples which was not apparent in the non-channelled samples. This correlated well with macrophage invasion into scaffolds since angiogenesis in vivo is usually accompanied by infiltration of macrophages which participate in organization of angiogenesis, and in regulation of tissue regeneration. Thus, macrophage-mediated biodegradation of collagen scaffolds in vitro was also assessed. Furthermore, pre-seeding channelled collagen scaffolds with endothelial cells implantation has potential of speeding up vascularisation of scaffolds compared to human bone marrow stromal cells.

Breast cancer is one of the most common types of cancer affecting women in the world today. To better understand breast cancer initiation and progression modeling biological tissue under physiological conditions is essential. Indeed, breast cancer involves complex interactions between mammary epithelial cells and the stroma, both extracellular matrix (ECM) and cells including adipocytes (fat tissue) and fibroblasts (connective tissue). Therefore, the engineering of in vitro three-dimensional (3D) systems of breast tissues allows a deeper understanding of the complex cell-cell and cell-ECM interactions involved during breast tissue development and cancer initiation and progression. Furthermore, such 3D systems may provide a viable alternative to investigate new drug or drug regimen and to model and monitor concurrent cellular processes during tumor growth and invasion. The development of suitable 3D in vitro models relies on the ability to mimic the microenvironment, the structure, and the functions of the breast tissue. Different approaches to develop a novel 3D breast model have been investigated. Most models use gel scaffolds, including Matrigel® and collagen to generate breast tissue-like structures. However, the physicochemical, mechanical, and geometrical properties of these scaffolds only partially meet the mechanical, physical, and chemical parameters of the breast tissue matrix. In the present studies, we investigated the overall hypothesis that electrospun SF-derived scaffolds promote mammary cell growth and the formation of mammary-like structures depending on the composition and/or coating of the scaffolds with ECM proteins. Through an extensive literature search (1) the importance of 3D modeling of tissues and organs in vivo, (2) 3D modeling of the mammary tissue and currently available models, (3) the properties and applications of SF in tissue modeling and regeneration were reviewed (Chapter 1). Our studies provide evidence of the effects of various concentrations (Chapter 2) of SF along with different electrospinning techniques (Chapter 3) on the structure of electrospun scaffolds and whether those scaffolds provide suitable microenvironments for mammary epithelial cells as determined by MCF10A cell attachment, viability, and structure formation. Further, we investigated the effects of the key ECM proteins collagen I (Chapter 4) and laminin (Chapter 5) used to blend or coat, respectively, SF scaffolds on the attachment, viability and structure formation of mammary epithelial cells. Our studies first highlight the mechanical and physical properties of the different SF-derived scaffolds through various SF concentrations and electrospinning techniques. Second, the biocompatibility of these SF electrospun scaffolds was defined based on MCF10A cell survival and adhesion. Third, our data indicate that scaffolds derived from blended and/or coated SF with collagen I also promoted human mammary cell survival and adhesion. Lastly, our observations suggest that on laminin-coated SF scaffolds MCF10A mammary cells, in the presence of lactogenic hormones, differentiated forming acinus-like structures. Overall, these studies provide evidence that SF electrospun scaffolds closely mimic the structure of the ECM fibers and allow many advantages such as; physical and chemical modification of the microenvironment by varying electrospinning parameters and addition of various proteins, hormones, and growth factors, respectively. Further, coating these SF scaffolds with essential ECM proteins, in particular laminin, promote cell-ECM interactions necessary for cell differentiation and formation of growth-arrested structures, through providing cell integrin binding sites and appropriate chemical cues.

Tissue Engineering is a scientific discipline that aims to regenerate tissues and organs that are diseased, lost or congenitally absent. It encompasses the use of suitable synthetic equivalents of native extracellular matrix that may or may not be supplemented with cells or relevant growth factors. Such scaffolds are designed to reside at the site of implantation for a variable period of time during which they induce the regeneration of native tissue. During this time, they also provide a template for new cells to attach, infiltrate, differentiate into appropriate phenotype and eventually restore function of the concerned tissue. Among the factors that affect the outcome are the composition of scaffold, methods of fabrication, bulk properties of the scaffold and topography and architecture at the cellular level. Bone is unique in the body in that it is one of the few tissues capable of complete regeneration even in adults, as seen during fracture healing. However, certain conditions (non-union of fractures, congenital and acquired bone deficiencies) exist in which the regenerative capacities of bone are exceeded and appropriate intervention becomes necessary. Current treatment options include autologous bone grafts harvested from iliac crest or de-cellularized allografts or synthetic substitutes made from metals, ceramics and polymers. However these options have serious limitations: while autografts are limited in supply, necessitate second surgery and show inadequate vascularization, allografts can transmit viral infections. Metals, ceramics and polymers are in essence structural replacements without performing any biological function. Other problems associated with these synthetic materials include adverse immune reactions, corrosion, stress-shielding and secondary fractures due to inadequate osseo-integration. Bone tissue engineering is a specialized field of research that provides an alternative strategy to repair bone defects by exploiting the advances in engineering and better understanding of bone biology. Scaffold-based tissue engineering approach is a promising field that involves implantation of a biomaterial that is specifically matched in terms of biological and material properties to the tissue it replaces. This study explores the feasibility of using electrospinning as a potential fabrication strategy for bone tissue engineering applications, more specifically intended for cleft palate repair. This model represents a congenital deformity that affects both hard and soft tissues and presents unique challenges and opportunities. Among the challenges are: the need for the implant allow growth of the most complex areas of the facial skeleton, integrate and grow with the patient through adolescence, the ability of the implant to not interfere with vital functions including breathing and feeding. Further the implant should provide a flexible matrix that can effectively support erupting teeth. In spite of these extreme demands, maxilla is a non load-bearing membranous bone, a favorable consideration from materials engineering perspective. The present study is organized into three independent sections. The first section investigates developing strategies intended to improve the material properties of electrospun bone scaffold. Bone is composed of a high volume fraction (50%) of inorganic hydroxyapatite nanocrystals that is closely associated with collagen. The dispersal of brittle mineral is critical in not only strengthening the bone in compression but also contributes to the osteoconductivity of the matrix. Since loading of mineral in a bone scaffold is a serious limitation, we attempted to achieve improved loading of bone mineral by dual mineralization approach. We first incorporated nanocrystalline hydroxyapatite (nHA) directly into the scaffold by adding it to the electrospinning polymer solution. The second step involves inducing biomimetic mineralization of electrospun scaffolds by incubating them in simulated body fluid (SBF) for 2 weeks. The hypothesis was that the nanocrystalline hydroxyapatite seeded during electrospinning would act as sites for nucleation and further crystal growth when incubated in solution supersaturated with respect to calcium and phosphate ions. We tested this approach in two synthetic, biocompatible polymers-polydioxanone and poly (lactide: glycolide) and four formulations of SBF with differential loading of nHA (0-50% by wt. of polymer). A modified Alizarin Red S (ARS) staining that specifically binds to calcium was developed that allowed us to quantify the mineral content of 3D scaffold with great accuracy. Results indicated a unique combination of factors: PDO scaffolds containing 50% nHA incubated in 1x revised-SBF incubated under static conditions gave maximum mineralization over a period of two weeks. We then sought to exploit these findings to engineer a stiffer scaffold by stacking multiple layers together and cold welding them under high pressure. Electrospun scaffolds (1, 2 or 4 layered stacks) were either compressed before or after mineralizing treatment with SBF. After two weeks, scaffolds were analyzed for total mineral content and stiffness by uniaxial tensile testing. Results indicated while compression of multiple layers significantly increases the stiffness of scaffolds, it also had lower levels of mineralization partly due to increased density of fibers and loss of surface area due to fiber welding. However this can be offset to a reasonable degree by increasing the number of stacks and hence this strategy can be successfully adopted to improve the mechanical properties of electrospun scaffolds. The second section introduces a novel infrared imaging technique to quantify and characterize the biological activity of biomaterials, based on cell adhesion. Cells attach to the surface by the formation of focal contacts where multiple proteins including vinculin and talin assemble to signal critical processes like cell survival, migration, proliferation and differentiation. After allowing MG-63 osteoblasts to adhere to 2D biomaterial surface coated with extracellular matrix proteins (collagen, gelatin, fibronectin) cells were fixed and probed with antibodies for vinculin and talin. Secondary antibodies, tagged with infrared-sensitive fluorescent dyes, were used to quantify the molecules of interest. In addition, the kinetics of focal contact formation in these different substrates was followed. Successful quantification of focal contacts were made and further research revealed phosphorylation of vinculin at pY-822 as one potential mechanism for recruitment of vinculin to focal contacts. Hence it could represent a subset of vinculin and might serve as a specific molecular marker for focal contacts. As an extension, we evaluated the possibility of using such an assay to quantify 3D electrospun tissue engineering scaffolds. We fabricated scaffolds of graded biological activity by electrospinning blends of polydioxanone and collagen in different ratios. Vinculin and talin expressed by MG-63 cultured on these scaffolds for 24 hours were quantified in a similar manner. Results indicate that while talin does not show a significant difference in expression among different scaffolds, vinculin showed a positive correlation with increasing biological activity of scaffolds. In conclusion, we have identified vinculin as a reliable marker of focal contacts in 3D scaffolds while phosphovinculin (pY-822) was more specific to focal contacts in coated 2D substrates. In both instances, infrared imaging proved to be reliable in study of focal contacts. The third section aims to make the bone scaffolds osteoinductive- a property of a material to induce new bone formation even when implanted in subcutaneous and intramuscular heterotopic sites. Bone morphogenetic proteins (BMP) are potent cytokines that can induce migration, proliferation and differentiation of stem cells along osteoblastic lineage. The therapeutic efficacy of BMPs in the treatment of severe bone defects has been identified and is currently FDA approved for specific orthopedic applications. BMPs are clinically administered in a buffer form that not only makes the treatment expensive but less effective. Suitable delivery systems for BMP delivery have been an intense area of investigation. We rationalized electrospinning as a strategy to incorporate BMP within the scaffold and that would enable controlled release when implanted. One of the drawbacks of using electrospinning to deliver bioactive molecules is the potential denaturing effect and eventual loss of activity of BMPs. The final section of this dissertation tries to develop sensitive and relevant assays that could answer intriguing questions about solvent-protein interaction. We chose to use the BMP-2/7 heterodimer as the osteoinductive molecule of choice because of its superior potency compared to homodimer counterparts. We characterized the detection and quantification of BMP-2/7 using a slot blot technique. Further, we used a novel cell line (C2C12 BRA) to test the retention of activity of BMP-2/7 that has been exposed to organic solvents. Results indicate significant loss of activity when BMPs are exposed to organic solvents but complete recovery was possible by diluting the solvent with an aqueous buffer.

Danos ao sistema nervoso central (SCN) resultam em perda de conexões axonais, das funções motoras e sensoriais. Uma das estratégias para seu reparo é o transplante de células-tronco mesenquimais (CTMs). Porém essa alternativa requer uma adequada via de aplicação. Nesse sentido, o uso de matrizes alinhadas pode ser usado para apoiar o crescimento e diferenciação das CTMs e, quando incorporadas com fatores de crescimento, otimizam o processo de regeneração tecidual. O objetivo desse trabalho foi avaliar a diferenciação neural das CTMs cultivadas sobre matrizes de nanofibras orientadas com o fator de crescimento epidermal (EGF) incorporado. Os scaffolds com fibras alinhadas foram produzidos por electrospinning de emulsão e avaliados conforme a sua morfologia, o diâmetro das nanofibras, a degradabilidade e a liberação do EGF. As CTMs utilizadas foram provenientes da polpa de dentes decíduos esfoliados humanos. Essas células foram cultivadas nos scaffolds e avaliadas conforme os testes biológicos: adesão, viabilidade, proliferação, citotoxicidade e diferenciação neural. Os scaffolds com fibras alinhadas controle (AC) e contendo o EGF (AE) apresentaram morfologia, diâmetro das nanofibras e tempo de degradação semelhantes. Com base no total de EGF presente na matriz AE, 90,14% foi liberado após 28 dias. O citoesqueleto e o núcleo das CTMs cultivadas nos scaffolds AC e AE estavam mais alongados e alinhados quando comparado com as CTMs cultivadas no poço de cultura (controle). As CTMs aderiram mais nas matrizes AE em relação às matrizes AC, porém a proliferação e viabilidade celular foram similares, exceto no tempo de 72 horas, o qual a viabilidade no grupo controle foi maior, em comparação aos demais grupos. Os scaffolds AC e AE não foram tóxicos para as CTMs. Em relação aos resultados da neuro-diferenciação, a expressão de nestina e neurofilamentos consideravelmente maior em todos os grupos analisados quando comparado ao grupo controle. A expressão de βIII-tubulina e GFAP foi maior em todos os grupos diferenciados quando comparada ao grupo controle. A maioria das CTMs cultivadas nas matrizes AC e AE, induzidas ou não à diferenciação neural, apresentaram correntes dependente de voltagem para sódio. O valor de condutância máxima foi maior para todos os grupos analisados quando comparado ao grupo controle onde as células não foram diferenciadas. Portanto, as matrizes com nanofibras orientadas induzem à diferenciação neural das CTMs em neurônios funcionais tanto na ausência como na presença de EGF incorporado. As matrizes AE ainda mostraram ser capazes de melhorar a adesão celular. Dessa forma, conclui-se que as matrizes de nanofibras estudadas são uma possível estratégia para otimização da regeneração de lesões neurológicas. / Damage to the central nervous system (CNS) results in loss of axonal connections and motor and sensory functions. One of the strategies for its repair is the transplantation of mesenchymal stem cells (MSCs). However, this requires a suitable application route. Accordingly, the use of scaffolds support the growth of MSCs and, when incorporated with growth factors, optimize the regeneration process. The purpose of this study was to evaluate the neural differentiation of MSCs cultured on nanofiber matrices oriented with epidermal growth factor (EGF) incorporated. Aligned scaffolds were produced by electrospinning emulsion and evaluated according to their degradation, the morphology and diameter of the nanofibers, and release of EGF from the nanofibers. MSCs used were from human exfoliated deciduous teeth (SHED). These cells were cultured on the scaffolds and evaluated according to biological tests: adhesion, viability, proliferation, cytotoxicity and neural differentiation. The aligned control scaffolds (AC) containing EGF (AE) presented similar morphology, diameter of nanofibers and degradation time. Based on the total EGF present in the scaffold AE, 90.14% was released after 28 days. The cytoskeleton and the core of the MSCs cultured on scaffolds AC and AE were more aligned and elongated when compared to the MSCs grown on plate wells (control). MSCs adhered more to matrices AE when compared to matrices AC, although proliferation and cell viability were similar, except after 72 hours. In this period, the viability of the control group was higher when compared to the rest of the groups. Scaffolds AC and AE were not toxic to MSCs. In regard to the results of neuro-differentiation, the expression of nestin and neurofilament was much higher in all groups than the control group. The expression of βIII tublin and GFAP was higher in all differentiated groups than the control group. Most of the MSCs grown in matrices AC and AE, induced or not to neural differentiation, showed voltage-dependent sodium currents. The maximum value of conductance of these groups was higher for the cells in all groupscompared to the control group, where the cells were not differentiated. Therefore, oriented nanofiber matrices induce neural differentiation of MSCs into functional neurons both in the absence and in the presence of incorporated EGF. The matrices AE also showed improved cell adhesion. Thus, these matrices are a possible strategy for optimizing the regeneration of neurologic lesions.

For small diameter (<6 mm) blood vessel replacements, lack of collaterals and vascular disease preclude homografts; while synthetic analogs, ePTFE, expanded polytetrafluoroethylene, and PET, polyethyleneterephathalate, are prone to acute thrombosis and restenosis. It is postulated that the hierarchical assembly of cell populated matrices fabricated from protein analogs provides a new design strategy for generating a structurally viable tissue engineered vascular graft. To this end, synthetic elastin and collagen fiber analogs offer a novel strategy for creating tissue engineered vascular grafts with mechanical and biological properties that match or exceed those of native vessels. This work details techniques developed for the fabrication of prosthetic vascular grafts from a series of extracellular matrix analogs composed of nanofibrous collagen matrices and elastin-mimetic proteins, with and without cells, and subsequent evaluation of their biocompatibility and mechanical properties. The work details the fabrication and mechanical analysis of vascular grafts made from aforementioned protein analogs. Subesequent studies detail seeding and proliferation of rodent mesenchymal stem cells on protein-based composites to recapitulate the media of native vasculature. Finally detailing in vivo biocompatibility and stability of tissue engineered vascular grafts.

Hyaluronic acid (HA) is one of the primary chemical building blocks of the extracellular matrix and thus is an attractive material for biomedical applications. FDA approved HA-based materials are available as dermal fillers, joint viscosupplements, vitreous substitutes, and abdominal adhesion barriers. The engineering of new HA-based materials and applications is an active area of research. Here we develop several new types of HA-based hydrogels with unique and useful properties. To address the challenge of delivering hydrophobic drugs from hydrophilic hydrogel matrices we have grafted HA hydrogels with [Beta]-cyclodextrin to create hydrogels capable of binding poorly water soluble drugs. To create HA hydrogels with unique anisotropic swelling behavior we have developed a dual-crosslinking technique in which a super-swelling chemically crosslinked hydrogel is patterned with low-swelling photocrosslinked domains. When this dual-crosslinked hydrogel is swelled it contorts into a new shape because of differential swelling among photopatterned regions. To address the challenge of creating hydrogel scaffolds with biomimetic branched porosity we have invented a "crystal templating" technique. This technique grows dendritic crystals throughout a biopolymer solution, crosslinks the biopolymer around the crystals, and washes the crystals away to yield a hydrogel with a dendritic macroporous network. Lastly, we invented a method for patterning a substrate with a microarray of hydrogel compartments. A microarray of living cells is obtained when cells are seeded on the hydrogel patterned substrate. This method addresses the need for an inexpensive, simple method for obtaining living cell microarrays that does not require clean room labs and lithographic expertise. Each of these new materials were based on hyaluronic acid hydrogels but the methods are generalizable to hydrogels of other polymers too. In conclusion, the novel methods in this dissertation are a significant contribution to the engineering of HA-based materials. / text

Biodegradable hydrogels have become very promising materials for a number of biomedical applications, including tissue engineering and drug delivery. For optimal tissue engineering design, the mechanical properties of hydrogels should match those of native tissues as closely as possible because these properties are known to affect the behavior and function of cells seeded in the hydrogels. At the same time, high water-contents, large mesh sizes and well-tuned degradation rates are favorable for the controlled release of growth factors and for adequate transport of nutrients through the hydrogel during tissue regeneration. With these factors in mind, the goal of this research was to develop and investigate the behavior of injectable, biodegradable hydrogels with enhanced stiffness properties that persist even at high degrees of swelling. In order to do this, degradable functionalities were incorporated into photo-crosslinkable poly(ethylene glycol) and poly(acrylic acid) hydrogels, and these two components were used to make a series of double-network hydrogels. Synthesis of the precursor macromers, photopolymerization of the hydrogels, and structural parameters of the hydrogels were analyzed. The composition and the molecular weight between crosslinks (Mc) of the hydrogel components were varied, and the degradation, swelling, thermal and mechanical properties of the hydrogels were characterized over various time scales. These properties were compared to corresponding properties of the component single-network hydrogels.

This thesis covers combination of two independent works accomplished throughout the study. One part research is about the unexpected cyclization of Dipyridyl-glycoluril, and the other part is about synthesis of precursor calix[4]arene derivatives. In an attempted synthesis of peripherally pyridine substituted cucurbituril, an unexpected cyclized product was obtained. A careful NMR analysis followed by mass spectrometry and preliminary crystallographic analyses, helped us in resolving the structure. The structure has two quaternized pyridine functionalities and a groove suitable as a potential receptor site. In addition, just like the parent glycoluril structure, two remaining urea-derived nitrogens can be alkylated by alkyl halides. Thus, we believe this high yielding reaction may become an entry point to a new class of anion receptors. In the second work, certain important calix[4]arene derivatives were synthesized. They are the building blocks of important potential molecular, anion and cation sensing, and enzyme mimics. For these precursor molecules, functionalizations both on lower and upper rim have been studied. A careful study on NMR data has been performed and detailed investigation on the NMR data was discussed herein. Applying further one or two step procedures produces important target molecules having potential as sensors or artificial enzymes.

Thesis (Ph.D)--University of Tennessee Health Science Center, 2007. / Title from title page screen (viewed on October 8, 2007). Research advisor: Joo L. Ong, Ph.D. Document formatted into pages (xiii, 128 p. : ill.). Vita. Abstract. Includes bibliographical references (p. 106-114).