1 |
Energy Efficient Techniques For Algorithmic Analog-To-Digital ConvertersHai, Noman January 2011 (has links)
Analog-to-digital converters (ADCs) are key design blocks in
state-of-art image, capacitive, and biomedical sensing applications.
In these sensing applications, algorithmic ADCs are the preferred
choice due to their high resolution and low area advantages.
Algorithmic ADCs are based on the same operating principle as that
of pipelined ADCs. Unlike pipelined ADCs where the residue is
transferred to the next stage, an N-bit algorithmic ADC utilizes the
same hardware N-times for each bit of resolution. Due to the
cyclic nature of algorithmic ADCs, many of the low power techniques
applicable to pipelined ADCs cannot be
directly applied to algorithmic ADCs. Consequently, compared to those of
pipelined ADCs, the traditional implementations of algorithmic ADCs are
power inefficient.
This thesis presents two novel energy efficient techniques for algorithmic
ADCs. The first technique modifies the capacitors' arrangement of a
conventional flip-around configuration and amplifier sharing
technique, resulting in a low power and low area design solution. The
other technique is based on the unit
multiplying-digital-to-analog-converter approach. The proposed
approach exploits the power saving advantages of capacitor-shared technique
and capacitor-scaled technique. It is shown that, compared to
conventional techniques, the proposed techniques reduce the
power consumption of algorithmic ADCs by more than 85\%.
To verify the effectiveness of such approaches, two
prototype chips, a 10-bit 5 MS/s and a 12-bit 10 MS/s ADCs, are
implemented in a 130-nm CMOS process. Detailed design considerations
are discussed as well as the simulation and measurement results. According to the
simulation results, both designs achieve figures-of-merit of approximately 60 fJ/step,
making them some of the most power efficient ADCs to date.
|
2 |
Energy Efficient Techniques For Algorithmic Analog-To-Digital ConvertersHai, Noman January 2011 (has links)
Analog-to-digital converters (ADCs) are key design blocks in
state-of-art image, capacitive, and biomedical sensing applications.
In these sensing applications, algorithmic ADCs are the preferred
choice due to their high resolution and low area advantages.
Algorithmic ADCs are based on the same operating principle as that
of pipelined ADCs. Unlike pipelined ADCs where the residue is
transferred to the next stage, an N-bit algorithmic ADC utilizes the
same hardware N-times for each bit of resolution. Due to the
cyclic nature of algorithmic ADCs, many of the low power techniques
applicable to pipelined ADCs cannot be
directly applied to algorithmic ADCs. Consequently, compared to those of
pipelined ADCs, the traditional implementations of algorithmic ADCs are
power inefficient.
This thesis presents two novel energy efficient techniques for algorithmic
ADCs. The first technique modifies the capacitors' arrangement of a
conventional flip-around configuration and amplifier sharing
technique, resulting in a low power and low area design solution. The
other technique is based on the unit
multiplying-digital-to-analog-converter approach. The proposed
approach exploits the power saving advantages of capacitor-shared technique
and capacitor-scaled technique. It is shown that, compared to
conventional techniques, the proposed techniques reduce the
power consumption of algorithmic ADCs by more than 85\%.
To verify the effectiveness of such approaches, two
prototype chips, a 10-bit 5 MS/s and a 12-bit 10 MS/s ADCs, are
implemented in a 130-nm CMOS process. Detailed design considerations
are discussed as well as the simulation and measurement results. According to the
simulation results, both designs achieve figures-of-merit of approximately 60 fJ/step,
making them some of the most power efficient ADCs to date.
|
3 |
The Art of Solution-Focused Brief Therapy: Experiential Training for Novice Therapists in Creative Collaborative LanguagePantaleao, Lori Ann 01 January 2016 (has links)
Novice solution-focused brief therapists often have difficulty delivering scaling questions within the languaging of their clients. To help beginning Solution-Focused Brief Therapy (SFBT) trainees, this researcher has created the metaphorically enhanced scaling question (MESQ) training program. By incorporating a meaning making system such as the metaphor, the scaling question becomes expressive and symbolic to the client and his or her own story. The MESQ objective is to assist novice therapists in facilitating the SFBT scaling question creatively through the use of metaphor. A metaphor is a created meaning isomorphic to its original meaning or experience. The metaphor will be co-constructed through collaboration between client and therapist. The MESQ program encompasses three key elements of SFBT: listening, selecting, and building into three tangible activities designed for novice therapists to learn, articulate, and demonstrate their comprehension of the modified scaling technique (Bavelas, De Jong, Franklin, Froerer, Gingerich, Kim, Korman, Langer, Lee, McCullum, Jordan, & Trepper, 2013)
This research is qualitative in nature, due to the examined experiences of the MESQ training program participants. Action research has been chosen to emphasize the learning aspect, and assist in training development. The MESQ training program will be evaluated based on Kirkpatrick’s four levels of evaluating training programs: reaction, learning, behavior, and results. (Kirkpatrick, 1996). The focus of this research project will be to refine and develop the MESQ training program through analytic evaluation.
|
4 |
Low-Power Policies Based on DVFS for the MUSEIC v2 System-on-ChipMallangi, Siva Sai Reddy January 2017 (has links)
Multi functional health monitoring wearable devices are quite prominent these days. Usually these devices are battery-operated and consequently are limited by their battery life (from few hours to a few weeks depending on the application). Of late, it was realized that these devices, which are currently being operated at fixed voltage and frequency, are capable of operating at multiple voltages and frequencies. By switching these voltages and frequencies to lower values based upon power requirements, these devices can achieve tremendous benefits in the form of energy savings. Dynamic Voltage and Frequency Scaling (DVFS) techniques have proven to be handy in this situation for an efficient trade-off between energy and timely behavior. Within imec, wearable devices make use of the indigenously developed MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). This system is optimized for efficient and accurate collection, processing, and transfer of data from multiple (health) sensors. MUSEIC v2 has limited means in controlling the voltage and frequency dynamically. In this thesis we explore how traditional DVFS techniques can be applied to the MUSEIC v2. Experiments were conducted to find out the optimum power modes to efficiently operate and also to scale up-down the supply voltage and frequency. Considering the overhead caused when switching voltage and frequency, transition analysis was also done. Real-time and non real-time benchmarks were implemented based on these techniques and their performance results were obtained and analyzed. In this process, several state of the art scheduling algorithms and scaling techniques were reviewed in identifying a suitable technique. Using our proposed scaling technique implementation, we have achieved 86.95% power reduction in average, in contrast to the conventional way of the MUSEIC v2 chip’s processor operating at a fixed voltage and frequency. Techniques that include light sleep and deep sleep mode were also studied and implemented, which tested the system’s capability in accommodating Dynamic Power Management (DPM) techniques that can achieve greater benefits. A novel approach for implementing the deep sleep mechanism was also proposed and found that it can obtain up to 71.54% power savings, when compared to a traditional way of executing deep sleep mode. / Nuförtiden så har multifunktionella bärbara hälsoenheter fått en betydande roll. Dessa enheter drivs vanligtvis av batterier och är därför begränsade av batteritiden (från ett par timmar till ett par veckor beroende på tillämpningen). På senaste tiden har det framkommit att dessa enheter som används vid en fast spänning och frekvens kan användas vid flera spänningar och frekvenser. Genom att byta till lägre spänning och frekvens på grund av effektbehov så kan enheterna få enorma fördelar när det kommer till energibesparing. Dynamisk skalning av spänning och frekvens-tekniker (såkallad Dynamic Voltage and Frequency Scaling, DVFS) har visat sig vara användbara i detta sammanhang för en effektiv avvägning mellan energi och beteende. Hos Imec så använder sig bärbara enheter av den internt utvecklade MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). Systemet är optimerat för effektiv och korrekt insamling, bearbetning och överföring av data från flera (hälso) sensorer. MUSEIC v2 har begränsad möjlighet att styra spänningen och frekvensen dynamiskt. I detta examensarbete undersöker vi hur traditionella DVFS-tekniker kan appliceras på MUSEIC v2. Experiment utfördes för att ta reda på de optimala effektlägena och för att effektivt kunna styra och även skala upp matningsspänningen och frekvensen. Eftersom att ”overhead” skapades vid växling av spänning och frekvens gjordes också en övergångsanalys. Realtidsoch icke-realtidskalkyler genomfördes baserat på dessa tekniker och resultaten sammanställdes och analyserades. I denna process granskades flera toppmoderna schemaläggningsalgoritmer och skalningstekniker för att hitta en lämplig teknik. Genom att använda vår föreslagna skalningsteknikimplementering har vi uppnått 86,95% effektreduktion i jämförelse med det konventionella sättet att MUSEIC v2-chipets processor arbetar med en fast spänning och frekvens. Tekniker som inkluderar lätt sömn och djupt sömnläge studerades och implementerades, vilket testade systemets förmåga att tillgodose DPM-tekniker (Dynamic Power Management) som kan uppnå ännu större fördelar. En ny metod för att genomföra den djupa sömnmekanismen föreslogs också och enligt erhållna resultat så kan den ge upp till 71,54% lägre energiförbrukning jämfört med det traditionella sättet att implementera djupt sömnläge.
|
Page generated in 0.1099 seconds