O objetivo deste trabalho é avaliar a viabilidade técnica do desenvolvimento de uma miniextrusora dupla-rosca corrotativa que, além de processar a matéria-prima, possa exercer a função de um cabeçote de impressão 3D. Os avanços tecnológicos na área da manufatura relacionados à impressão 3D têm gerado grande entusiasmo nos últimos 10 anos, na medida em que possibilitam a fabricação de formas geométricas de alta complexidade diretamente a partir de arquivos digitais, agilizando a cadeia de produção e reduzindo custos de ferramental associados. Apesar das inúmeras vantagens, a Manufatura Aditiva (MA) ainda é uma tecnologia em desenvolvimento e, portanto, apresenta desafios para que possa realmente atender às novas demandas criadas pela comunidade científica e industrial, muitos deles relacionados com a busca por novos materiais de impressão, com a melhoria dos materiais utilizados, das estratégias de deposição visando menor tempo de fabricação e maior precisão dimensional e com a ausência de padronização para os processos. As tendências no desenvolvimento de materiais para as técnicas de MA por extrusão apontam tanto para a elaboração de compósitos de matriz polimérica e blendas capazes de conferir propriedades mecânicas mais apropriadas às impressões e/ou proporcionar novas funcionalidades, quanto para o desenvolvimento de sistemas que possibilitem a deposição de matérias-primas diferenciadas ou a incorporação de soluções de pós-processamento para compor sistemas híbridos de manufatura. Nesse contexto, a principal motivação deste trabalho é a ausência de um equipamento para produção de compósitos poliméricos e blendas a partir pequenas quantidades de material em pó (cerca de 200 g) e que também seja capaz de estruturar objetos tridimensionais por meio da deposição de camadas sucessivas de material fundido. A fim de obter o conjunto de parâmetros geométricos e operacionais fundamentais para a definição e avaliação da miniextrusora dupla-rosca, houve a necessidade de se desenvolver um procedimento sistemático integrando conceitos de projeto de máquinas, processo de extrusão dupla-rosca e reologia aplicados ao contexto da MA. O método de projeto resultante considera requisitos funcionais e restrições geométricas específicas, conciliando a necessidade de manter uma folga constante entre as roscas com a desejada ação de autolimpeza obtida por meio da interpenetração das mesmas. A capacidade de processar o material viscoso com o torque fornecido às roscas, requisito crítico a ser atendido, foi avaliada teoricamente para o ABS (acrilonitrila butadieno estireno) virgem e validada experimentalmente para três sistemas baseados em ABS com auxílio de um reômetro de torque. Ao final do estudo, foi obtido um modelo geométrico virtual de dimensões reduzidas (69,6x75x201 mm) e na sequência foi construído um mock-up com auxílio da impressão 3D para avaliação das tolerâncias dimensionais, cinemática e funcionalidades básicas do conjunto. Estima-se que a miniextrusora projetada, operando a 10 rpm, seja capaz de processar até 0,2 kg/h e gerar 60% do calor necessário para a fusão (ABS), mostrando-se viável para aplicação como cabeçote intercambiável de impressão 3D destinado à pesquisa de novos materiais para MA. / The objective of this document is accessing the development feasibility of a mini co-rotating twin-screw extruder capable of mixing different materials and performing the function of 3D printhead. The technological progress in the manufacturing context related to 3D printing have generated great enthusiasm in the last 10 years, as it enables fabricating complex geometric shapes directly from digital files, speeding up production chain and reducing associated tooling costs. Despite the many advantages, Additive Manufacturing (AM) is still an emerging technology and must overcome challenges to effectively meet the new demands created by scientific and industrial communities, many of them related to the search for new building materials, improving current materials and deposition strategies, in order to achieve faster fabrication and increased dimensional precision, as well as the lack of process standardization. Tendencies towards material development to AM techniques based in extrusion points to the formulation of different polymer matrix composites and blends capable of imparting more appropriate mechanical properties to the 3D prints and/or provide new functionalities, as well as to the development of systems capable of depositing special raw materials or to the incorporation of post processing solutions composing hybrid manufacture systems. In that context, the main motivation for this work is the lack of an equipment for producing polymer composites and blends from small amounts of powder material (about 200 g) that is also capable of structuring three-dimensional objects depositing successive layers of fused material. In order to obtain the fundamental geometric and operational parameters set to define and access the mini twin-screw extruder, it was necessary to develop a systematic procedure integrating concepts from machine design, twin-screw extrusion and rheology applied to the AM context. The resulting design method considers specific functional requisites and geometric constraints, conciliating the need for a constant clearance between the screws and the desired self-cleaning action obtained with closely intermeshing screws. The capacity to process viscous material with the torque provided to the screws, a critical requisite to be met, was theoretically evaluated considering ABS resin (acrylonitrile butadiene styrene) and experimentally validated to three polymer systems based in ABS with a torque rheometer. At the end of the study, a virtual geometric model with reduced dimensions (69.6x75x201 mm) was obtained and then a mock-up was 3D printed in order to evaluate dimensional tolerances, cinematics and basic functionalities. It is estimated that the mini twin-screw extruder designed is able to process up to 0.2 kg/h running at 10 rpm and generate 60% of the heat necessary to melt the polymer (ABS), showing to be feasible to its application as an interchangeable 3D printhead for research of new materials in AM.

The objective of this work is to determine the effect of four process variables on the properties of blends composed of bisphenol-A polycarbonate (PC) and poly (butylene terephthalate) (PBT) polymers which are compounded using a large scale commercial extruder. The four variables studied are blend composition, specific energy consumption, residence time and shear rate. The last three factors were varied using the extruder screw speed and feed rate. The PC/PBT blends, commercially known as XENOY, were compounded using a WP ZSK 58 mm co-rotating twin screw extruder at the facility of SABIC Innovative Plastics in Cobourg Ontario. The extruder was instrumented to measure online the die pressure, specific energy consumption and blend temperature. The blends were characterized using differential scanning calorimetry, (DSC), scanning electron microscopy, (SEM), gel permeation chromatography, (GPC), and melt volume flow rate, (MVR). After processing, the blend properties determined were melting temperature, glass transition temperature, crystallinity, amorphous phase weight fraction, amorphous phase composition, phase morphology, PBT-rich-phase size, blend molecular weight distribution, and MVR. Using principles available in the literature, a linear regression model was developed to relate the process variables with the online measured properties and output blend properties. Fitting this model allowed the relative importance of each process variable to be estimated for each property. An attempt was also made to identify the general type of PC/PBT blend studied and how it compares with published PC/PBT blend data. It was found that the blends studied were well stabilized since there was no evidence of significant co-polymer formation during processing. Small decreases in molecular weight were attributed to mechanical degradation. Blending increased the crystallization and melting temperatures, as well as blend crystallinity. No practically significant difference in melting temperatures was observed between the different processing conditions. Analysis of glass transitions indicated that the blend components were partially miscible. The amorphous phase compositions were unaffected by blend composition or processing; however, the weight fraction PC-rich-phase present in the blend was strongly influenced by the screw speed. The phase structure of as-extruded blends could not be resolved using the SEM. Therefore, the blends were annealed to coarsen the phases. After annealing, a continuous PC-rich-phase and a discrete PBT-rich-phase were observed. The PBT phase size increased with increasing PBT content. No other statistically significant effects on phase size were observed but this is not conclusive due to the large scatter in the measurements. MVR was primarily influenced by blend composition and specific energy consumption, with the effects of composition being dominant. Further study using higher imaging resolution is required if the phase structures of as received blend pellets are to be characterized. Contrary to current practice, it is recommended that the Utracki-Jukes equation be used rather than the Fox equation for determining amorphous phase composition from glass transition data in PC/PBT blends.

The objective of this work is to determine the effect of four process variables on the properties of blends composed of bisphenol-A polycarbonate (PC) and poly (butylene terephthalate) (PBT) polymers which are compounded using a large scale commercial extruder. The four variables studied are blend composition, specific energy consumption, residence time and shear rate. The last three factors were varied using the extruder screw speed and feed rate. The PC/PBT blends, commercially known as XENOY, were compounded using a WP ZSK 58 mm co-rotating twin screw extruder at the facility of SABIC Innovative Plastics in Cobourg Ontario. The extruder was instrumented to measure online the die pressure, specific energy consumption and blend temperature. The blends were characterized using differential scanning calorimetry, (DSC), scanning electron microscopy, (SEM), gel permeation chromatography, (GPC), and melt volume flow rate, (MVR). After processing, the blend properties determined were melting temperature, glass transition temperature, crystallinity, amorphous phase weight fraction, amorphous phase composition, phase morphology, PBT-rich-phase size, blend molecular weight distribution, and MVR. Using principles available in the literature, a linear regression model was developed to relate the process variables with the online measured properties and output blend properties. Fitting this model allowed the relative importance of each process variable to be estimated for each property. An attempt was also made to identify the general type of PC/PBT blend studied and how it compares with published PC/PBT blend data. It was found that the blends studied were well stabilized since there was no evidence of significant co-polymer formation during processing. Small decreases in molecular weight were attributed to mechanical degradation. Blending increased the crystallization and melting temperatures, as well as blend crystallinity. No practically significant difference in melting temperatures was observed between the different processing conditions. Analysis of glass transitions indicated that the blend components were partially miscible. The amorphous phase compositions were unaffected by blend composition or processing; however, the weight fraction PC-rich-phase present in the blend was strongly influenced by the screw speed. The phase structure of as-extruded blends could not be resolved using the SEM. Therefore, the blends were annealed to coarsen the phases. After annealing, a continuous PC-rich-phase and a discrete PBT-rich-phase were observed. The PBT phase size increased with increasing PBT content. No other statistically significant effects on phase size were observed but this is not conclusive due to the large scatter in the measurements. MVR was primarily influenced by blend composition and specific energy consumption, with the effects of composition being dominant. Further study using higher imaging resolution is required if the phase structures of as received blend pellets are to be characterized. Contrary to current practice, it is recommended that the Utracki-Jukes equation be used rather than the Fox equation for determining amorphous phase composition from glass transition data in PC/PBT blends.

Les procédés de transformation de biomasse lignocellulosique en bioéthanol de seconde génération sont actuellement des sujets de recherche très répandus mais ne sont toujours pas compétitifs avec ceux de la première génération. Les facteurs clés limitants sont : l’efficacité et les coûts du prétraitement, les rendements de l’hydrolyse enzymatique, et la co-fermentation C5-C6. Un procédé continu de déconstruction de la matière végétale, compactant un prétraitement thermo-mécano-chimique utilisant un agent alcalin avec une introduction d’enzymes en extrusion bi-vis, appelé bioextrusion, est développé dans cette étude. Il permet de préparer la matière cellulosique à un haut taux de matière sèche (>20%), à une saccharification et une fermentation pouvant être simultanées (SSF). Le traitement continu peut extraire une grande part des hémicelluloses (jusqu’à 97%) et des lignines (>50%) et améliorer l’accessibilité de la cellulose tout en initiant sa dépolymérisation par des cocktails enzymatiques pendant la bioextrusion. Plusieurs matières premières (Résidu de maïs doux, Bagasse d’agave bleue, Résidu d’huilerie de palme, Paille d’orge, Résidu d’Eucalyptus, Sarments de vigne et Bagasse de canne à sucre) ont été caractérisées et leurs comportements vis-à-vis du procédé ont été comparés. L’évolution de la composition de ces matières à travers le procédé et leur hydrolysabilité ont été étudiées. Suite au traitement, une augmentation du rendement de saccharification dans un réacteur (24h de temps de réaction à 20% de consistance) a été obtenue pour ces matières (jusqu’à 85% des C6 théoriques et 70% des C5-C6 théoriques). Les rendements de fermentation non optimisés atteignent un maximum de 85% théorique des sucres C6 convertis, 65% théorique des C5-C6 convertis, et une concentration d’éthanol de 15g/100g extrudat sec. Le procédé de production d’éthanol dans son ensemble (avec addition de l’énergie de la valorisation des coproduits) atteint un ratio « énergie consommée/produite » de 0.5-0.6. Le nouveau procédé présente ainsi les avantages de minimiser la consommation d’énergie par l’application de faibles températures, de minimiser la consommation d’eau par l’utilisation de faibles ratios liquide/solide, de ne pas produire d’inhibiteurs de fermentation et d’être rapide, compact, continu et adaptable sur différentes biomasses. / Lignocellulosic biomass transformation processes in order to produce second generation bioethanol are actually widely studied all around the world but still not yet competitive compare to the first generation. The limiting key factors of the different processes are: the pre-treatment efficiency and costs, the enzymatic hydrolysis yields, and the co-fermentation C5-C6. A continuous plant matter deconstruction process, compacting a thermo-mechanico-chemical pre-treatment using alkali solution with an enzymes injection in twin-screw extruder, called bioextrusion, is developed in this study. It allows preparing the cellulosic material at a high dry matter content (>20%), to a possible simultaneous saccharification and fermentation (SSF). This continuous treatment may extract a big part of hemicelluloses (until 97%) and lignin (>50%) and configures cellulose to a better accessibility and a start of its depolymerisation by enzymes cocktail during the bioextrusion. Several raw matters (Sweet Corn Cob and Spathe, Blue Agave Bagass, Oil Palm Empty Fruit Bunch, Barley Straw, Eucalyptus Residue, Grape Pruning Residue and Sugarcane Bagass) have been characterized and theirs behaviours toward to the process were compared. Evolutions of these matters compositions throughout the process and their hydrolysability have been studied. Further to the treatment, an improvement of the saccharification yields in reactor (24h reaction time at 20% consistency) has been obtained on these matters (until 85% of theoretical C6 and 70% of theoretical C5-C6). The not optimized fermentation yields reach a maximum of 85% of theoretical converted C6 sugars, 65% of theoretical converted C5-C6 sugars, and an ethanol concentration of 15g/100g dry matter extrudate. The whole ethanol production process (with addition of energy from the recovery of the by-products) is achieved with a “consumed/produced energy” ratio of 0.5-0.6. The new process presents the advantages to minimize the energy consumption by operating low temperatures, to minimize water consumption by working at low liquid/solid ratio, to not produce fermentation ‘s inhibitors and to be quick, compact, continuous and adaptable to different biomasses.

L’incorporation de fibres végétales, différentes par leur origine, leur nature chimique et leur forme, a été effectuée dans deux matrices thermoplastiques : le poly(acide lactique) et la farine de blé thermoplastifiée. Ces deux matrices biodégradables et biosourcées ont elles aussi des natures chimiques et des propriétés thermo-mécaniques différentes. Des incorporations de fibres jusqu’à 40 % en poids ont permis de modifier considérablement les propriétés de base des matrices et d’améliorer certaines de leurs faiblesses (stabilité thermique, manque de rigidité…). Les fibres de miscanthus ont été sélectionnées comme étant les plus performantes pour l’amélioration des propriétés des deux matrices. Les propriétés des matériaux composites ont été ajustées par un travail sur la formulation du mélange (ajout de plastifiants) et l’optimisation du procédé complet, jusqu’au moulage par injection. L’incorporation des fibres dans un mélange compatibilisé des deux matrices a également été testée et réalisée en une seule étape d’extrusion, comprenant la plastification de la farine, le mélange des polymères et la dispersion des fibres. / Incorporation of vegetal fibres, differing by their source, their chemical composition and their shape, have been performed by twin screw extrusion in two thermoplastic matrices: the poly(lactic acid) and the thermoplastified wheat flour. These two biobased and biodegradable matrices have also different chemical character and thermo-mechanical properties. Fibre incorporation up to 40 % in weight considerably modified both matrix properties and improved several weaknesses (thermal stability, lack of stiffness…). Miscanthus fibres have been selected as best improvers for properties of both matrices. Materials properties were adjusted with a formulating work (addition of plasticizers) and whole process optimization, until injection-molding. Fibre incorporation in a compatibilized blend of the two matrices was also tested and performed in a one step extrusion process, including flour thermoplasticization, polymer blending and fibre dispersion.

L’objectif de ces travaux est de développer une nouvelle voie de valorisation de différents coproduits agricoles et forestiers. L’étude s’est focalisée sur l’étape de séparation entre les hémicelluloses et les lignines contenues dans des extraits aqueux obtenus par extrusion bi-vis. La technologie bi-vis du fait de sa modularité a été choisie pour évaluer différentes conditions d’extraction. Les essais ont été menés afin de mettre en évidence l’influence des effets mécanique, thermique et chimique sur l’extraction des hémicelluloses à partir des différentes matrices végétales étudiées. Les travaux ont été conduits soit en conditions hydrothermales, eau sous pression et haute température, soit en conditions faiblement alcalines pour extraire des molécules les plus natives possibles. Ceci a permis d’identifier les conditions d’extraction les plus favorables en fonction des caractéristiques de chacune des biomasses. Dans un second temps, les extraits obtenus, contenants des hémicelluloses et des composés phénoliques, ont été purifiés au moyen de méthode de fixation sur résines d’échange d’ions et d’adsorption. Les travaux se sont focalisés sur la compréhension des mécanismes de fixation des molécules avec des solutions modèles contenant un ou plusieurs solutés. La cinétique et les isothermes d’échanges ont été évaluées pour l’acide férulique, l’acide coumarique et la lignine. Les résultats ont ensuite été comparés à ceux obtenus avec les extraits alcalins. Cette étude a permis d’identifier les mécanismes d’échanges qui interviennent lors de la séparation des complexes lignine-polysaccharides. / The objective of this work is to validate a new way of valuing various agricultural and forestry coproducts. Study was devoted on the separation of lignin and hemicelluloses contained in extracts obtained by twin-screw extrusion. Twin-screw technology has been chosen to evaluate different extraction conditions. Trial conditions have been adopted in order to highlight the influence of mechanical, thermal and chemical effects on the extraction performances for various plant matrices. Efforts have been made to give priority to mild extraction conditions in the interest of preserving the integrity of the extracted polymers and limiting the environmental impact. Thus hydro-thermal extraction tests without chemical solvents were compared to more conventional alkaline extraction to evaluate their efficiency. This identified the most favorable extraction conditions according to the characteristics of each biomass. The extracts, with hemicelluloses and phenolic compounds, were purified with ion exchange and adsorption resins. Work focused on mechanisms fixations characterization with model solutions conditions containing one or several molecules. Kinetic and isotherm were determined for lignin, coumaric acid and ferulic acid. Then, results were compared to results obtained with the extracts. This study allowed to identify the mechanisms involved in the separation of the lignin-carbohydrates complex.

No description available.

No description available.

Dans ce travail de thèse, nous nous sommes intéressés au mélange de la farine de blé et du poly(acide lactique). La farine de blé, qui est composée principalement d'amidon, a été thermoplastifiée en extrudeur bivis par l'effet conjugué de la chaleur et du cisaillement en présence de plastifiants. Le poly(acide lactique) est, quant à lui, le polyester biodégradable le plus répandu à l'heure actuelle. Le mélange de ces deux phases est thermodynamiquement immiscible et peu compatible, différents leviers sont testés afin d'améliorer la qualité du mélange. Une première partie de ce travail repose sur la recherche de conditions optimales pour la transformation et le mélange des matières premières. L'extrusion bivis est utilisée à la fois pour plastifier l'amidon et pour assurer un bon mélange entre les phases. Le profil de vis et les différents équipements sont donc choisis en conséquence. Différents paramètres classiques de l'extrusion bivis sont étudiés : le profil de vis, le profil de température, le taux de remplissage… L'étude de la formulation, notamment des plastifiants utilisés pour la plastification de l'amidon mais également l'utilisation de compatibilisants pour améliorer l'interface amidon/PLA est traitée en deuxième partie. L'acide citrique est testé à la fois comme plastifiant et comme compatibilisant. Ces investigations nous ont permis de mettre au point différents grades intéressants répondant à des applications industrielles distinctes : injectabilité, souplesse, rigidité… / In this work, we have been interested in blending wheat flour and poly(lactic acid). Wheat flour, which is mainly constituted of starch, has been transformed with plasticizers in a twin-screw extruder with the effect of heat and shear. Poly(lactic acid) is the main biodegradable polyester in the world nowadays. These two phases are thermodynamically immiscible and not very compatible, different ways are tried to improve the blend quality. A first part of this work lies on the search of optimal conditions to transform and blend the raw materials. Twin-screw extrusion is used to pasticize starch and to ensure a good blending between the two phases. Screw design and different equipments have been chosen for this purpose. Classical twin-screw parameters have been studied: screw design, temperature profile, filling ratio… The study of the formulation, more particularly of plasticizers for starch plasticization but also of compatibilizers to improve starch/PLA interphase is tackled in a second part. Citric acid is tested as a plasticizer but also as a compatibilizer. These researches have allowed to develop interesting formulations for industrial applications: possibility of processing by injection-molding, flexibility, rigidity…

Este trabalho tem o objetivo de apresentar o desenvolvimento do projeto informacional e do projeto conceitual de um mini-cabeçote vertical de extrusão com rosca de seção variável intercambiável. A montagem e a validação funcional deste cabeçote é feita na impressora 3-D Fab@CTI de forma intercambiável, na qual o projeto da estrutura foi baseada no projeto Fab@home. O projeto envolve o estudo sistemático utilizando o QFD para identificação dos requisitos do usuário e a escolha do \"cabeçote de deposição\", como característica técnica mais importante conduz o desenvolvimento do projeto conceitual e parte do projeto preliminar do mini-cabeçote vertical de extrusão. Utilizando análise morfológica no projeto conceitual se obteve a configuração do projeto, no qual foi possível dimensionar os principais componentes do sistema proposto: rosca/cilindro e sistema de acionamento. Os materiais considerados para o dimensionamento mecânico, bem como das estimativas das geometrias das seções da rosca foram poliamida e PCL, este último material foi escolhido por ser um biomaterial e por apresentar características físico-químicas mais criticas para o dimensionamento do dispositivo. O projeto conceitual foi fabricado e montado para demonstrar sua funcionalidade de extrusão utilizando um material pastoso e pó sem processo de aquecimento. Este trabalho apresenta o projeto e a validação técnica de um mini-cabeçote intercambiável de extrusão por rosca para utilização em impressoras 3-D utilizadas em manufatura aditiva. A abordagem sistemática de projeto demonstra a importância de técnicas de metodologia de projeto durante o desenvolvimento de um produto, a fim de se obter qualidade no projeto de engenharia. / The purpose of this work is to present the study of the informational and conceptual design of the vertical mini-screw extrusion head applied to portable and open source additive manufacturing machine. The design was validated considering the proposal of interchangeable heads applied to Brazilian 3-D printer based on Fab@home mechanical design. It was developed a systematic study using QFD to identify user\'s requirements, supporting the choice of a \"deposition head\" as the most important technical characteristic, leading the design development of a mini vertical system based on a extrusion screw with variable section. The conceptual design using the morphological analysis defined the design configuration, allowing to make a pre-calculation of the main components of the proposed head: screw, barrel and actuation system. The deposition materials, considered for the theoretical calculations, were polyamide and PCL, being the last a biocompatible polymer. This choice lead to critical physicochemical properties related to system design. The conceptual design was manufactured and assembled, demonstrating its functionality to extrude a paste like and powder materials without heating. This work presented the design and the validation of an interchangeable mini-extruder screw head developed to a portable 3-D printer used in additive manufacturing process. The systematic approach demonstrated the importance of the design methodology tools during the product development to obtain quality in the design engineering.