Orientador: Flavio Caldas da Cruz / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin / Made available in DSpace on 2018-08-14T07:51:57Z (GMT). No. of bitstreams: 1 NunezPortela_Mayerlin_M.pdf: 5161095 bytes, checksum: e6a7c2d2eb88d6f484ae5211642dbec1 (MD5) Previous issue date: 2009 / Resumo: Os relógios atômicos são usados na atualidade em um grande número de aplicações científicas e tecnológicas que vão desde experimentos de relatividade e determinação de constantes fundamentais, até sistema de navegação (GPS) e telecomunicações. A proxima geração de relógios atômicos de alta precisão estará baseada em transições ópticas de átomos frios. Neste trabalho foi desenvolvido um laser de estado sólido de Nd:YLF bombeado por um laser de diodo e duplicado em frequência em 657 nm. Este sistema é proposto como oscilador local em um relógio atômico óptico baseado em átomos de cálcio. Comparado com os lasers de diodo, este apresenta uma potência maior no vermelho, um ruído de frequência e amplitude menores e a possibilidade de transferência remota usando obras ópticas no comprimento de onda fundamental de 1314 nm. Duplicação em frequência intra-cavidade é feita usando um cristal de BiBO, com superfícies anti-refletoras, e com um casamento de fase crítico tipo I à temperatura ambiente. Uma potência de 270 mW na saída do vermelho foi obtida para uma potência de bombeamento de 11.6 W. / Abstract: Atomic clocks are used today in a number of scientific and technological applications, ranging from tests of relativity, or variations of fundamental constants, to the use in navigation and telecommunication. The next generation of such high precision devices will be based on optical transitions of suitable laser cooled and trapped atoms. In this work we describe a frequency-doubled, diode-pumped solid-state Nd:YLF ring laser emitting at 657 nm, proposed as a local oscillator in an optical atomic clock based on laser cooled and trapped calcium atoms. Compared to diode lasers, its main advantages include higher power, less intrinsic frequency noise, and the possibility of remote transfer in optical fibers using the fundamental light at 1314 nm. Frequency doubling is performed inside the cavity using a 10 mm long AR-coated BiBO crystal, under type I, critical phase-matching at room temperature. Red output power of 270 mW was achieved for 11.6 W of pumping power. / Mestrado / Física Atômica e Molecular / Mestre em Física

Orientadores: Konradin Metze, Carlos Lenz Cesar / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Ciências Médicas / Made available in DSpace on 2018-08-21T10:46:07Z (GMT). No. of bitstreams: 1 Vieira-Damiani_Gislaine_D.pdf: 4044155 bytes, checksum: 7a862a3866981d1827845318ce37b121 (MD5) Previous issue date: 2012 / Resumo: A hipertensão arterial sistêmica (HAS) bem como o envelhecimento provoca mudanças na estrutura dos grandes vasos sanguíneos - aorta e seus ramos - propiciando o desenvolvimento de processos degenerativos que são a causa de diversas doenças. O uso de ferramentas fotônicas na aquisição de imagens, associado a recursos matemáticos para a interpretação delas representa um avanço para as análises histopatológicas, pois permitem a visualização e compreensão de pequenas estruturas que antes eram impossíveis de serem observadas. O objetivo desse trabalho foi associar estas duas tecnologias (ferramentas fotônicas e recursos matemáticos) e com isso criar uma metodologia para a análise simultânea de fibras elásticas e colágenas na aorta. Para tanto utilizamos aorta ascendente de 72 pacientes, sendo 22 normotensos, 38 portadores de HAS e 12 aortas de dissecção. As lâminas coradas com hematoxilina eosina foram examinadas no microscópio multifoton, com dois fótons: laser de argônio para fluorescência da eosina, corante de fibras elásticas e Ti:safira para SHG, sinal gerado por moléculas de colágeno. A distribuição e organização das fibras elásticas e colágenas foram analisadas pelas seguintes variáveis: morfometria geométrica, derivadas da matriz de co-ocorrência de Haralick, Transformada de Fourier e fluorescência ótica integrada. Usando estes descritores da textura associados a fractais, observamos que a geração do SHG é dependente não só da presença do colágeno como também do arranjo destas fibras. Observamos ainda que em indivíduos normotensos, quando comparados aos portadores de HAS, ocorre uma diminuição na distribuição do sinal SHG ao longo da espessura da camada média partindo da íntima em sentido à adventícia. Dessa maneira concluímos que os maiores distúrbios das fibras elásticas, nos indivíduos normais ocorrem na transição do terço interno para o médio, enquanto que nos portadores de HAS eles estão distribuídos em toda a espessura da aorta. Além disso, estes estudos nos permitiram verificar que a dissecção da aorta ocorre entre dois reforços de colágeno, uma vez que este fenômeno foi constatado entre dois picos de SHG / Abstract: The arterial hypertension as well as aging induces changes in the structure of large blood vessels - aorta and its branches - leading to development of degenerative processes which are the cause of many diseases. The use of photonics tools for image acquisition, associated to mathematical resources for interpretation of them represents an advance in histopathological analysis, because it allows the visualization and understanding of small structures that were impossible to be observed before. The main objective of this study was to associate both technologies (photonics tool and mathematical resources) to create a new methodology to evaluate, simultaneously, elastic and collagen fibers in aorta. For this we've used autopsies of ascending aortas from 72 patients, being 22 samples from normotensives individuals, 38 from HAS patients and 12 aortas from dissection. HE-stained paraffin sections from ascending aortas were analyzed by multifoton microscopy, with 2 types of photons: Two-photon excited fluorescence (TPEF) for elastin and Ti:safira for SHG to analyze collagen fibers. The distribution and organization of elastic and collagen fibers were analyzed by the following variables: geometric morphometric, derived from the co-occurrence matrix of Haralick, Fourier Transform and Fluorescence optics integrated. Using these texture descriptors associated to analysis of fractals, we've observed that SHG generation is not only dependent on the presence of collagen but on the arrangement of these fibers as well. We also observed that in normotensives individuals, if compared to HAS patients, occurs a decrease in the SHG intensity along the medial thickness from intimate in direction to adventitia. Thus we conclude that the major disorders of elastic fibers in normal subjects occur in the transition from the third layer to the middle, while in HAS individuals these disorders are distributed throughout the thickness of the aorta. Furthermore, this study has allowed us to verify that the aortic dissection has occurred between two peaks of SHG, since this phenomenon was observed between two ribs collagen / Doutorado / Biologia Estrutural, Celular, Molecular e do Desenvolvimento / Doutora em Fisiopatologia Médica

Cette thèse a pour but de déterminer les meilleures conditions possibles pour réaliser une génération de seconde harmonique (SHG) à partir d'un fondamental dans la bande C télécom (autour de 1.55 JJm) dans des microdisques de phosphure de gallium intégrés sur silicium. Il s'inscrit dans les efforts actuels de développement de circuits photoniques intégrés en étudiant une proposition technique pour tirer parti des effets non linéaires en optique. A partir d'une résolution approchée de l'équation de propagation des ondes électromagnétiques comportant un terme source d'origine non linéaire, il a permis d'aboutir à deux "cartes" indiquant, pour l'une, les conditions nécessaires à la SHG, pour l'autre, l'efficacité théorique attendue suivant les paramètres retenus. S'appuyant sur l'expertise du laboratoire Folon en matière d'intégration monolithique de GaP sur Si, une étude de l'influence sur la SHG de certains défauts de cristallisation a été menée et a conduit à la proposition de deux nouvelles techniques d'accord de phase dans les disques de GaP épitaxiés sur Si. D'un point de vue expérimental, ce travail de thèse a permis, d'une part, de doter le laboratoire d'un banc de fabrication de fibres effilées (tapers) et fibres effilées gaufrées (dimpled tapers) et, d'autre part, d'un banc de caractérisation optique des microdisques adapté à l'étude de la SHG. / The goal of this thesis is to determine the best conditions to manage the second harmonic generation (SHG) from afundamental in the telecom C-band (around 1.55 (Jm) in gallium phosphide microdisks integrated on silicon. Findingtechnical solutions to take advantage of the non linear effects in these devices is a contribution to the actual efforts madeto develop integrated photonics circuits.In this work, the approximate resolution of the electromagnetic wave propagation equation completed by a nonlinearsource led to two "charts" indicating, for one, the necessary conditions for SHG, and for the other, the conversionefficiency theoretically allowed according to the chosen parameters. Thanks to the Foton laboratory expertise inmonolithical integration of GaP on Si, the influence on the SHG of specific structural defects was studied. This has led tothe proposal of two new phase matching techniques in GaP/Si microdisks.From an experimental point of view, this work led to the fabrication of two setups, the fi rst one, to make tapered opticalfibres and dimpled tapers, the second one, to make optical characterizations of microdisks and to study SHG in these systems.

Ce travail s’inscrit dans le contexte des microscopies optiques à très haute résolution. Nous proposons un nouveau concept de sonde active pour la microscopie optique en champ proche (SNOM), exploitant les effets de génération de second harmonique (SHG) de molécules. L’idée développée vise à s'affranchir de l’une des principales limitations des sondes actives fluorescentes réalisées jusqu'à présent : l'accrochage des sondes à l'extrémité de la pointe SNOM, étape toujours délicate et souvent peu fiable. Pour ce faire, nous avons mis en œuvre une technique qui consiste à utiliser la localisation du champ électrique au sein d’une jonction pointe métallique-substrat conducteur immergée dans une solution de molécules non-linéaires dipolaires. L’interaction champ-molécules entraine l’orientation locale un nano-volume de ces molécules dont l’excitation par un laser permet ensuite la génération d’un signal de second harmonique. Après avoir validé ce concept dit de « nano-EFISHG » (Electric Field Induced SHG) nous avons conçu un nouveau banc expérimental, dédié à l'imagerie de second harmonique haute résolution : celui-ci a permis d'obtenir les premières images présentant un contraste de second harmonique sur un échantillon structuré à l'échelle micronique.Nous avons ensuite travaillé à l’optimisation de la résolution de l’expérience mise en place : nous avons notamment démontré la possibilité de tirer parti d’effets d’exaltation locale du champ électromagnétique se produisant à l'extrémité de pointes ou de nano-objets métalliques. L’extrapolation des résultats obtenus montre que de telles exaltations devraient permettre d’atteindre des résolutions de l’ordre de 50 nm. / This work was achieved within the context of high resolution optical microscopy. We propose a new concept of active probe for near-field optical microscopy (SNOM), exploiting the effect of second harmonic generation (SHG) of molecules. The idea intends to avoid one of the main limitations of currently developed fluorescent active probes: the anchoring of the probes at the end of a SNOM tip which is a very delicate and often unreliable step. The technique implemented here consists in using the electric field localization in a metallic tip – conducting substrate junction immersed in a solution containing dipolar non-linear molecules. The interaction between the molecules and the electric field gives rise to the local orientation of a nano-volume of these molecules whose excitation by a laser allows generation of a second harmonic signal.After validation of this concept named as “nanoEFISHG” (Electric Field Induced SHG) we have designed a new experimental setup, dedicated to high resolution second harmonic imaging. Successful implementation of this setup has leaded to the recording of the first images presenting a second harmonic contrast on a sample structured at the micronic scale. Next step has consisted in working towards optimization of the experimental resolution: we have especially study the possibility of taking advantages of local field enhancement effects occurring at metallic nano-structures or sharp tip’s apex. The extrapolation of the obtained results shows that such effects should allow to reach resolutions about 50 nm.

Polarization-dependence provides a unique handle for extending the dimensionality of optical microscopy, with particular benefits in nonlinear optical imaging. Polarization-dependent second order nonlinear optical processes such as second harmonic generation (SHG) provide rich qualitative and quantitative information on local molecular orientation distribution. By bridging Mueller and Jones tensor, a theoretical framework was introduced to experimentally extend the application of polarization-dependent SHG microscopy measurements toward in vivo imaging, in which partial polarization or depolarization of the beam can complicate polarization analysis. In addition, polarization wavefront shaping was demonstrated to enable a new quantitative phase contrast imaging strategy for thin transparent samples. The axially-offset differential interference contrast microscopy (ADIC) was achieved as a combination of classic Zernike phase contrast and Nomarski differential interference contrast (DIC) methods. The fundamentally unique manner of this strategy also inspired rapid volumetric analysis in time dimension that is accessible for most existing microscopy systems. Finally, the dimensionality of high speed twophoton fluorescence imaging was extended to the spectral domain by spatial/spectral multiplexing, enabling beam scanning two photon fluorescence microscopy with 17 frames per second rate and over 2000 effective spectral data points.<br>

Les semi-conducteurs nitrures d'éléments III type GaN, AlN sont des matériaux extrêmement intéressants pour la photonique intégrée sur silicium. Ils sont transparents sur une gamme très étendue et possèdent des susceptibilités non linéaires non nulles, ce qui rend possible les expériences non linéaires d'ordre deux et d'ordre trois. Dans ce contexte, cette thèse a été consacrée à l'étude de circuits photoniques avec des micro-résonateurs tels que les cristaux photoniques et les microdisques en matériau GaN/AlN épitaxiés sur Si. Le dessin des microcavités et des procédés de fabrication ont été optimisés afin d’obtenir un mode résonant dans le proche infrarouge avec un facteur de qualité jusqu'à 34000 pour les cristaux photoniques et 80000 pour les microdisques. J’ai étudié sur ces circuits photoniques les propriétés de conversion harmonique telles que la génération de seconde harmonique (SHG) et la génération de troisième harmonique (THG). En utilisant les propriétés de la THG, en combinant simplement un objectif optique et une caméra CCD, j'ai effectué l'imagerie des modes de cristaux photoniques du proche infrarouge avec une résolution spatiale sub-longueur d'onde (300 nm). J'ai également effectué l'imagerie de SHG sur des microdisques avec une excitation optique en résonance avec un mode de galerie pour le laser pompe. La dernière partie porte sur l'étude de la SHG en accord de phase entre les modes TM-0-0-X et TM-0-2-2X en variant le diamètre du disque avec un pas extrêmement faible (8 nm). Cela a été effectué pour des modes résonants de facteurs de qualité autour de 10000. Ces résultats montrent le potentiel des semi-conducteurs de III-nitrures pour la réalisation de circuits optiques sur silicium à deux dimensions. / Nitride semiconductors are extremely interesting for integrated photonics on silicon. They have a large transparent window and dispose of non zero nonlinear susceptibilities which enable second and third order nonlinear experiments. In this context, this thesis has been devoted to integrated photonic circuits with microresonators such as photonic crystals and microdisks. The microcavity design and the fabrication process have been optimized in order to obtain a near infrared resonant mode with a quality factor up to 34000 for photonic crystals and 80000 for microdisks. I carried out harmonic conversion experiments such as second harmonic generation (SHG) and third harmonic generation (THG). With THG, by combining simply an optical objective and a CCD camera, I carried out near infrared photonic crystal modes imaging with a subwavelength spatial resolution (300 nm). I also did SHG imaging on microdisks with an optical excitation in resonance with the gallery mode for the pump laser. The last part of the work is dedicated to the demonstration of phase-matched SHG in microdisk photonic circuits between the TM-0-0-X and TM-0-2-2X modes by varying the microdisk diameter with a very small step (8 nm). These experiments have been done for resonant modes with quality factors around 10000.These demonstrations show the potential of III-nitride semiconductors for the realization of two dimensional optical circuits on silicon.

<p> Understanding the function and structure of a protein is crucial for informing on rational drug design and for developing successful drug candidates. However, this understanding is often limited by the protein pipeline, i.e. the necessary steps to go from developing protein constructs to generating high-resolution structures of macromolecules. Because each step of the protein pipeline requires successful completion of the prior step, bottlenecks are often created and therefore this process can take up to several years to complete. Addressing current limitations in the protein pipeline can help to reduce the time required to successfully solve the structure of a protein. </p><p>The field of nonlinear optical (NLO) microscopy provides a potential solution to many issues surrounding the detection and characterization of protein crystals. Techniques such as second harmonic generation (SHG) and two-photon excited UV fluorescence (TPE-UVF) have already been shown to be effective methods for the detection of proteins with high selectivity and sensitivity. Efforts to improve high throughput capabilities of SHG microscopy for crystallization trials resulted in development of a custom microretarder array (μRA) for depth of field (DoF) extension, therefore eliminating the need for z-scanning and reducing the overall data acquisition time. Further work was done with a commercially available μRA to allow for polarization dependent TPE-UVF. By placing the μRA in the rear conjugate plane of the beam path, the patterned polarization was mapped onto the field of view and polarization information was extracted from images by Fourier analysis to aid in discrimination between crystalline and aggregate protein. </p><p>Additionally, improvements to X-ray diffraction (XRD), the current gold standard for macromolecular structure elucidation, can result in improved resolution for structure determination. X-ray induced damage to protein crystals is one of the greatest sources of loss in resolution. Previous work has been done to implement a multimodal nonlinear optical (NLO) microscope into the beamline at Argonne National Lab. This instrument aids in crystal positioning for XRD experiments by eliminating the need for X-ray rastering and reduces the overall X-ray dosage to the sample. Modifications to the system to continuously improve the capabilities of the instrument were done, focusing on redesign of the beam path to allow for epi detection of TPE-UVF and building a custom objective for improved throughput of 1064 nm light. Furthermore, a computational method using non-negative matrix factorization (NMF) was employed for isolation of unperturbed diffraction peaks and provided insight into the mechanism by which X-ray damage occurs. This work has the potential to improve the resolution of diffraction data and can be applied to other techniques where X-ray damage is of concern, such as electron microscopy.</p><div><br></div>

Reversed-phase liquid chromatography (RPLC) is a commonly used separation technique in chemistry. Nevertheless, the mechanistic interactions at the molecular level among the eluent, analyte, and the stationary phase are not fully understood. Because of this limited understanding, optimization of the separation must be done experimentally. Learning more about molecular interactions should aid in improving separations. We are currently using second-harmonic generation (SHG) spectroscopy to investigate how analytes adsorb to the surface. SHG is a spectroscopic technique that produces signal only at places of non-isotropic symmetry; this typically occurs at surfaces. SHG can be used to produce surface isotherms of test analytes adsorbed to a model C18 stationary phase surface. Fitting these isotherms with a Langmuir model produces an adsorption equilibrium constant. However, the equilibrium constant can only be accurately determined if the true bulk concentration is known; this thesis describes an approach to ensure this. The equilibrium constant relates to Gibbs free energy and is the start to obtaining other thermodynamic information. The long equilibration times of analytes with the stationary phase observed in this study emphasize the importance of both thermodynamic information and kinetic values for understanding retention. Once equilibrium constants and other parameters are accurately obtained, this information can be used to improve predictions and calculations from numerical models.

The rapid progress on developing new and improved multifunctional materials, for optoelectronic and spin based phenomena/devices, have increased the importance of the fundamental understanding of their coherent states and nonlinear optical properties. This study is aimed at characterizing, modeling, and controlling the fundamental electronic, phononic, and spin properties of several classes of materials through nonequilibrium and nonlinear light-matter interactions, coupled with a novel design of the material phases, interfaces, and heterostructures. This research directly addresses the Grand Challenges identified in the Basic Energy Sciences Advisory Committee report "Directing Matter and Energy: Five Challenges for Science and the Imagination" (Hemminger, 2007) [1], in particular, the area: "Matter far beyond equilibrium" and addresses the questions, "How do remarkable properties of matter emerge from complex correlations of the atomic or electronic constituents and how can we control these properties?" and "How do we design and perfect atom- and energy-efficient synthesis of revolutionary new forms of matter with tailored properties?". The knowledge gained from these fundamental studies can provide new information for a broad community to provide concepts for the next generation of multifunctional materials and devices, and resulted in several publications and conference presentations. The materials studied in this dissertation included multiferroic BaTiO3-BiFeO3 [2], ferroelectric Pb0.52Zr0.48TiO3 (PZT), InAs/AlAsSb multi-quantum-well [3], lead halide perovskite [4], n-type InAsP films [5, 6], and nanolaminate plasmonic crystals [7]. Probing multiferroics, which are materials that can exhibit ferromagnetic, ferroelectric, and ferroelastic orders simultaneously in a single phase, was a main focus of this study. BiFeO3 (BFO) is the most widely investigated multiferroic due to its high Neel and Curie temperatures and has antiferromagnetic and ferroelectric properties [8]. An inherent drawback of BFO is its large leakage currents. In this project, (1 − x)BaTiO3-(x)BiFeO3, x = 0.725 (BTO-BFO) heterostructures were investigated [9], where the conductivity of the solid solution can be reduced by adding another perovskite material, BaTiO3 [2]. We aimed to study optically induced coherent states in our BTO-BFO structures. Time resolved pumpprobe spectroscopic measurements were performed at room temperature as well as at low temperature (100 K) up to 10 T. Coherent acoustic phonons were observed both in a film and nanorods, resulting in coherent phonon frequencies of 27 and 33 GHz, respectively [2]. Coherent phonon spectroscopy is a sensitive tool to characterize the interfaces and can be employed as an effective ultrasensitive quantum sensor [10]. Furthermore, in the nanorods arrays of BTO-BFO, an additional oscillation with frequency in the range of 8.1 GHz was observed. This frequency is close to a theoretically predicted magnon frequency which could indicate the coexistence of coherent phonons and magnons in the nanorods arrays [2]. In an analogy to photonics which relies on electromagnetic waves, magnonics utilizes spin waves to carry and process information, offering several advantages such as an operation frequency in the THz range. Recently, "a quantum tango" [11] was reported where coupled coherent magnon and phonons modes were formed on a surface patterned ferromagnet. Furthermore, BTO-BFO heterostructures were probed using transient birefringence and magneto-optical Kerr effect spectroscopy. The results demonstrated that the magnetic field dependence of coherent phonons, measured by these two techniques, exhibits more sensitivity to the external magnetic fields compared to the differential reflectivity technique [2]. Moreover, nonlinear optical properties of this structure were investigated via second harmonic generation spectroscopy, where wavelength and polarization dependence of this nonlinear observation will be discussed in this dissertation. As part of this study, another class of multiferroic materials, with strong ferroelectric and piezoelectric properties, Pb0.52Zr0.48TiO3 (PZT) was studied [12]. In this project, the nonlinear optical properties of PZT nanorod arrays were investigated. Clear signatures of second harmonic generations from 490-525 nm (2.38-2.53 eV) at room temperature, were observed. Furthermore, time resolved differential reflectivity measurements were performed to study dynamical properties in the range of 690-1000 nm where multiphoton processes were responsible for the photoexcitations. We compared this excitation scheme, which is sensitive mainly to the surface states, to when the photoexcited energy (∼ 3.1 eV) was close to the bandgap of the nanorods. Our results offer promises for employing these nanostructures in nonlinear photonic applications. Furthermore, the established techniques during my research provided new insights on optical properties of InAs/AlAsSb multi-quantum-well [3], lead halide perovskite [4], n-type InAsP films [5, 6], and nanolaminate plasmonic crystals [7], and the results will be briefly presented in this dissertation. / Doctor of Philosophy / My research activities have explored multifunctional materials and heterostructures with strongly enhanced coupled electric and magnetic orders and optical properties. In particular, pursuing novel heterostructure designs such as multiferroics can provide control over electric and magnetic ordering in mixed dimensionality. This, together with control at the level from lattice structure to electron spin states can give rise to improved or even qualitatively new and robust materials properties. For example, a better understanding of the phenomena associated with the spin degree of freedom of electrons allows for advancement in spintronic device applications such as storage, logic, and sensors, which are associated with quantum computers and quantum communications [13, 14, 15]. Overarching questions and goals of my activities included: What are the microscopic origins and mechanisms of nonlinear response in strongly coupled nanostructured materials and its relationship to electronic, spin, and lattice degrees of freedom? (2) What are the effects of dimensionality and quantum confinement on optical properties? (3) How do we control and manipulate the coherent states, such as coherent phonons and magnons using external and internal fields, material composition, and morphology to achieve maximal efficiency and tunability? Addressing many of the challenges in the fast-paced technological world requires continued developments of new materials with enhanced optical properties. The knowledge gained from my fundamental studies can provide new information for the next generation of multifunctional materials and devices with advanced optical properties and resulted in several publications and conference presentations.

Semiconductor based micro- and nano-structures grown in a systematic and controlled way using selective area growth are emerging as a promising route toward devices for integrated optical circuitry in optoelectronics and photonics field. This dissertation focuses on the experimental investigation of the nonlinear optical effects in selectively grown gallium nitride micro-pyramids that act as optical cavities, zinc oxide submicron rods and indium gallium nitride multiple quantum well core shell submicron tubes on the apex of GaN micro pyramids that act as optical antennae. Localized spatial excitation of these low dimensional semiconductor structures was optimized for nonlinear optical light (NLO) generation due to second harmonic generation (SHG) and multi-photon luminescence (MPL). The evolution of both processes are mapped along the symmetric axis of the individual structures for multiple fundamental input frequencies of light. Effects such as cavity formation of generated light, electron-hole plasma generation and coherent emission are observed. The efficiency and tunability of the frequency conversion that can be achieved in the individual structures of various geometries are estimated. By controlling the local excitation cross-section within the structures along with modulation of optical excitation intensity, the nonlinear optical process generated in these structures can be manipulated to generate coherent light in the UV-Blue region via SHG process or green emission via MPL process. The results show that these unique structures hold the potential to convert red input pulsed light into blue output pulsed light which is highly directional.