The diploma thesis deals with the design and assessment of reinforced concrete structure supporting two-storey building of the underground garage for cars. In the space above the garage is designed open area with public space. The project was designed especially outer water-impermeable construction method white bath and a base plate and a perimeter wall. The structure was designed as a comprehensive model. Computing analyzed by finite element method. All selected elements were assessed at the ultimate limit state and limit state, namely to limit state of cracking load and forced stress.

The Diploma thesis deals with design and static assessment of timber footbridge structural system for pedestrians and cyclist across the Trebuvka river in Lostice on the site of the existing footbridge. Structural system is designed in two alternatives and assessed according to the current standards. Spans of the bridge are 2x18 m and 1x6 m. The main beams are made of glued laminated timber, other parts of the structure are made of timber and steel elements. First alternative is designed as a simple half-through truss beam, second alternative as continuous beam with variable height where the deck is sitting on top of the girders.

The diploma thesis is focused on solving road bridge situated between Roudno and Razová village over the water basin Slezská Harta. Before the design itself 3 studies were created and compared together. The selected variant is a continuous box girder with inclined walls, post-tensioned by bonded cables. The girder of a total lenght 148,0 m and width 13,6 m is divided into three spans. Height of the girder is 3,3 m. A detailed structural design, including construction limit state assessment, prestress design and time dependent analysis verification is processed. The design and the assessments of temporary and permanent situations are made according to valid standarts and regulations. Drawings and vizualizations are parts of the diploma thesis.

This diploma thesis deals with design of steel structure with composite steel-concrete floor structure of a office building.The building is located in Moravský Krumlov. The Office buidling consist of multi-storey building and an entrance atrium. The total ground plan's dimensions are 52,8m x 48,0m. The multi-storey building has 8 floor. The maximum heigh of the building is 25,32m above ground. The project is designed in two options. For winning variant is including check and it is performed a drawings with design and check assembly details and anchorage.

This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.

This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation

The aim of the diploma thesis was to design reinforced concrete construction of the indoor swimming pool and ensure impermeability of the construction, to ensure behavior as concrete tank construction. Static analysis was done by using program Dlubal RFEM 5.12, where interaction of subsoil with construction was taken into account. Slabs around the swimming pool area were divided into expansion section because of temperature changes from glass façade an after that the sealing of expansion gap was solved. Construction system under the swimming was designed and was tested the behavior of walls and slabs. Analysis was done also to considerate of hydration heat. The drawing was done by software CADKON RCD.

The diploma‘s thesis deals with the design and assessment of prestressed cocrete tank of biogas station at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of wall of the tank and foundation slab. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain drawing documentation and structural analysis, which completes the text part and solves in detail said structure.

The master’s thesis deals with a design of a reinforced concrete foundation of multi-storey office building. The basement of the building is an underground watertight structure. The design of foundations is a combination of a concrete slab and piles. Internal forces were analysed in RFEM software based on finite element method. The structural assessment of underground construction was performed according to ultimate and serviceability limit states. Due to watertight function of construction, the reinforcement was also designed according to non-force effect in early stage.

The Diploma thesis deals with the reconstruction design of a footbridge in the city of Kroměříž, Czech Republic. The footbridge would serve as safe transport for pedestrians over the Morava river. The main objective of the thesis is to conceive two or three reconstruction designs. The most suitable one will be opted for and elaborated in more detail. Eventually, strengthening of the bridge by means of additional prestressing using mono-strand post-tensioning systems is picked as the best solution of the planned reconstruction. The monostrand post-tensioning system is led under the deck, the cross section being outside. External cables are anchored in concrete blocks built around existing supports. Load-generated internal forces are calculated on a spatial bar model with non-linear first-order analysis. The calculation is executed using the finite element method in the midas Civil programme. The chosen reconstruction design is then assessed against load capacity limit states, and functionality. Also, the designed reconstruction is assed for dynamic effects. Results are compared with existing structure, and verified against the real-time tensometric measurement-obtained data. Dimensions, assessment of load-bearing structure, and structural details are all made according to valid Eurocodes.