No description available.

No description available.

No description available.

No description available.

No description available.

The Mississippi River Valley Alluvial Aquifer (MRVAA) aquifer is the principal water source for Mid-South irrigators, but the current rate of withdrawal from the aquifer is not sustainable. Means to increase the sustainability of the MRVAA is to improve corn’s water use efficiency (WUE) while, concurrently, maintaining or improving profitability. The objectives of this experiment were to determine the effects of sensor-based irrigation threshold, planting date, and hybrid on corn grain yield, WUE, and net returns above seed and irrigation cost. Season long irrigation thresholds of -50 kPa full irrigation (FI) and -125 kPa limited irrigation (LI) were used, utilizing furrow irrigation. In conclusion, utilizing a delayed irrigation trigger of -125 kPa decreases grain yield and, ultimately, net returns in years with less naturally occurring rainfall, but increases WUE. Shifting the planting date earlier and using full-season (FS) hybrids, increases grain yield, WUE, and net returns.

The latter part of the reproductive growth phase in chickpea (<i>Cicer arietinum</i> L.) often coincides with declining temperature and wet conditions in western Canada, in sharp contrast to many other growing environments. This exacerbates the indeterminate nature of the crop, leading to excessive canopy development, and subsequently resulting in delayed maturity. The objectives of this study were to: i) determine the genetic relationships of short internode, double podding and early flowering traits with earliness of crop maturity; ii) determine the genetic control of major earliness traits in chickpea; iii) assess the patterns of post-flowering dry matter accumulation and partitioning to reproductive parts as related to earliness. <p>The results showed that double podding significantly reduced the number of days taken to maturity, under the conditions where this trait was sufficiently expressed. The best double podding genotypes, i.e. those with 1535% of the podded nodes bearing double pods, were about one week earlier than their single podding counterparts and standard checks. A physiological study revealed that the double podding parental genotype 272-2 partitioned a relatively greater proportion (about 58%) of the total dry matter to pods compared to 4254% in the single podding genotypes. Double podding increased the total number of pods set, and thus the increased demand for assimilates may have precluded further production of stems and leaves, resulting in an earlier transition of reproductive growth to physiological maturity. Days to flowering was positively associated with days to maturity, and partial path analysis revealed that days to flowering contributed to days to maturity indirectly via days to first pod maturity. Days to flowering explained 32% of the variation in days to first pod maturity. However, the short internode trait had an undesirable effect, in that all the short internode segregants were too late to mature. <p>Genetic studies revealed that days to flowering was determined by two major genes plus polygenes in chickpea in the short-season temperate environment of western Canada. The two major genes control over 65% of the phenotypic variation. Also, the additive component of genetic variance was significant for days to first podding, days to first pod maturity, reproductive period, and days to maturity; which is desirable for development of superior inbred cultivars of chickpea. These key phenological traits are interrelated but could be manipulated separately in the breeding process. Additional gain in earliness of crop maturity may be achieved through combined selection for these traits.

The latter part of the reproductive growth phase in chickpea (<i>Cicer arietinum</i> L.) often coincides with declining temperature and wet conditions in western Canada, in sharp contrast to many other growing environments. This exacerbates the indeterminate nature of the crop, leading to excessive canopy development, and subsequently resulting in delayed maturity. The objectives of this study were to: i) determine the genetic relationships of short internode, double podding and early flowering traits with earliness of crop maturity; ii) determine the genetic control of major earliness traits in chickpea; iii) assess the patterns of post-flowering dry matter accumulation and partitioning to reproductive parts as related to earliness. <p>The results showed that double podding significantly reduced the number of days taken to maturity, under the conditions where this trait was sufficiently expressed. The best double podding genotypes, i.e. those with 1535% of the podded nodes bearing double pods, were about one week earlier than their single podding counterparts and standard checks. A physiological study revealed that the double podding parental genotype 272-2 partitioned a relatively greater proportion (about 58%) of the total dry matter to pods compared to 4254% in the single podding genotypes. Double podding increased the total number of pods set, and thus the increased demand for assimilates may have precluded further production of stems and leaves, resulting in an earlier transition of reproductive growth to physiological maturity. Days to flowering was positively associated with days to maturity, and partial path analysis revealed that days to flowering contributed to days to maturity indirectly via days to first pod maturity. Days to flowering explained 32% of the variation in days to first pod maturity. However, the short internode trait had an undesirable effect, in that all the short internode segregants were too late to mature. <p>Genetic studies revealed that days to flowering was determined by two major genes plus polygenes in chickpea in the short-season temperate environment of western Canada. The two major genes control over 65% of the phenotypic variation. Also, the additive component of genetic variance was significant for days to first podding, days to first pod maturity, reproductive period, and days to maturity; which is desirable for development of superior inbred cultivars of chickpea. These key phenological traits are interrelated but could be manipulated separately in the breeding process. Additional gain in earliness of crop maturity may be achieved through combined selection for these traits.

Chickpea (Cicer arietinum L.) production on the semi-arid Canadian Prairies is challenging due to a short growing season and low and variable moisture. The current recommended chickpea population density of 44 plants m-2 is based on preliminary studies and a narrow range of 20 to 50 plants m-2. The aims of this study were to i) determine optimum population density of varying chickpea canopy types, i.e., leaf type and growth habit, by investigating seed yield responses at 30 to 85 plants m-2 and ii) identify desirable parental traits for breeding programs by assessing growth and yield parameter responses to varying leaf types and growth habits at a range of population densities. Field experiments were conducted from 2002 to 2005. Canopy measurements and calculated variables included light interception, biomass, growth rate, seed yield, harvest index, ascochyta blight severity and radiation- and water use efficiencies. The plant density which produced the highest seed yield when averaged over years for each location for each treatment revealed that a plant density of at least 55 plants m-2 produced a 23% to 49% seed yield increase above that of the currently recommended plant density. This indicates that a higher seed yield average over the long term in spite of periodic low seed yield episodes will be more profitable to producers. Increasing plant density increased lowest pod height significantly in all except one location-year but did not explicitly increase ascochyta blight severity or decrease individual seed size. This suggests that increasing the recommended chickpea plant density on the Canadian Prairies will increase seed yield but would neither negatively impact individual seed size nor ascochyta blight severity, especially, when combined with good agronomic practices. Fern-leaved cultivars had significantly higher maximum intercepted light (62 to 91%), seed yield (136 to 369 g m-2), harvest index (0.33 to 0.53), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and lower ascochyta blight severity (3 to 27%) than the unifoliate cultivars in all location-years. The fern-leaved cultivars also tended to show significantly higher cumulative intercepted radiation (221 to 419 MJ m-2) and biomass (306 to 824 g m-2) but leaf type showed no consistent effect on radiation use efficiency. Cultivars with bushy growth habit generally performed better regarding maximum intercepted light (62 to 90%), cumulative intercepted radiation (233 to 421 MJ m-2), biomass (314 to 854 MJ m-2), seed yield (120 to 370 g m-2), harvest index (0.37 to 0.50), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and ascochyta blight severity (7 to 36%) than the erect cultivars. The overall performance of the spreading cultivar was generally intermediate between the bushy and erect cultivars except for ascochyta blight severity where the spreading cultivar exhibited significantly lower disease severity (3 to 36%). Radiation use efficiency was generally not influenced by growth habit. Increasing plant population density generally increased intercepted light, biomass and cumulative intercepted radiation on each sampling day after seeding resulting in a general increase in seed yield. Harvest index, however, remained constant and ascochyta blight severity was generally stable but radiation use efficiency decreased with increasing population density. Chickpea cultivars with fern leaves and bushy growth habit at higher than currently recommended population densities would best utilize the limited resources of the short-season Canadian prairie environment to maximize and stabilize seed yield.

Chickpea (Cicer arietinum L.) production on the semi-arid Canadian Prairies is challenging due to a short growing season and low and variable moisture. The current recommended chickpea population density of 44 plants m-2 is based on preliminary studies and a narrow range of 20 to 50 plants m-2. The aims of this study were to i) determine optimum population density of varying chickpea canopy types, i.e., leaf type and growth habit, by investigating seed yield responses at 30 to 85 plants m-2 and ii) identify desirable parental traits for breeding programs by assessing growth and yield parameter responses to varying leaf types and growth habits at a range of population densities. Field experiments were conducted from 2002 to 2005. Canopy measurements and calculated variables included light interception, biomass, growth rate, seed yield, harvest index, ascochyta blight severity and radiation- and water use efficiencies. The plant density which produced the highest seed yield when averaged over years for each location for each treatment revealed that a plant density of at least 55 plants m-2 produced a 23% to 49% seed yield increase above that of the currently recommended plant density. This indicates that a higher seed yield average over the long term in spite of periodic low seed yield episodes will be more profitable to producers. Increasing plant density increased lowest pod height significantly in all except one location-year but did not explicitly increase ascochyta blight severity or decrease individual seed size. This suggests that increasing the recommended chickpea plant density on the Canadian Prairies will increase seed yield but would neither negatively impact individual seed size nor ascochyta blight severity, especially, when combined with good agronomic practices. Fern-leaved cultivars had significantly higher maximum intercepted light (62 to 91%), seed yield (136 to 369 g m-2), harvest index (0.33 to 0.53), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and lower ascochyta blight severity (3 to 27%) than the unifoliate cultivars in all location-years. The fern-leaved cultivars also tended to show significantly higher cumulative intercepted radiation (221 to 419 MJ m-2) and biomass (306 to 824 g m-2) but leaf type showed no consistent effect on radiation use efficiency. Cultivars with bushy growth habit generally performed better regarding maximum intercepted light (62 to 90%), cumulative intercepted radiation (233 to 421 MJ m-2), biomass (314 to 854 MJ m-2), seed yield (120 to 370 g m-2), harvest index (0.37 to 0.50), yield-based water use efficiency (0.56 to 1.06 g m-2 mm-1) and ascochyta blight severity (7 to 36%) than the erect cultivars. The overall performance of the spreading cultivar was generally intermediate between the bushy and erect cultivars except for ascochyta blight severity where the spreading cultivar exhibited significantly lower disease severity (3 to 36%). Radiation use efficiency was generally not influenced by growth habit. Increasing plant population density generally increased intercepted light, biomass and cumulative intercepted radiation on each sampling day after seeding resulting in a general increase in seed yield. Harvest index, however, remained constant and ascochyta blight severity was generally stable but radiation use efficiency decreased with increasing population density. Chickpea cultivars with fern leaves and bushy growth habit at higher than currently recommended population densities would best utilize the limited resources of the short-season Canadian prairie environment to maximize and stabilize seed yield.