Yes / Multi-ionizable compounds, such as dicarboxylic acids, offer the possibility of forming salts of drugs with multiple stoichiometries. Attempts to crystallize ciprofloxacin, a poorly water-soluble, amphoteric molecule with succinic acid (S) resulted in isolation of ciprofloxacin hemisuccinate (1:1) trihydrate (CHS-I) and ciprofloxacin succinate (2:1) tetrahydrate (CS-I). Anhydrous ciprofloxacin hemisuccinate (CHS-II) and anhydrous ciprofloxacin succinate (CS-II) were also obtained. It was also possible to obtain stoichiometrically equivalent amorphous salt forms, CHS-III and CS-III, by spray drying and milling, respectively, of the drug and acid. Anhydrous CHS and CS had melting points at ∼215 and ∼228 °C, while the glass transition temperatures of CHS-III and CS-III were ∼101 and ∼79 °C, respectively. Dynamic solubility studies revealed the metastable nature of CS-I in aqueous media, resulting in a transformation of CS-I to a mix of CHS-I and ciprofloxacin 1:3.7 hydrate, consistent with the phase diagram. CS-III was observed to dissolve noncongruently leading to high and sustainable drug solution concentrations in water at 25 and 37 °C, with the ciprofloxacin concentration of 58.8 ± 1.18 mg/mL after 1 h of the experiment at 37 °C. This work shows that crystalline salts with multiple stoichiometries and amorphous salts have diverse pharmaceutically relevant properties, including molecular, solid state, and solubility characteristics. / Solid State Pharmaceutical Cluster (SSPC), supported by Science Foundation Ireland under grant number 07/SRC/ B1158.

Poly-aryl, also known as polyphenylene compounds are a class of dendrimer, which contain a large number of aromatic rings. They are of interest because they display restricted rotation of their stearically congested aromatic rings. These extended structures have the potential to act as precursors for even larger aromatic systems and have many applications including electronic devices, drug delivery and catalysis. A total of 23 novel poly-aryl compounds have been examined using single crystal X-ray diffraction and a number of structural patterns have emerged. Six of the compounds contain alkynes and it has been observed that their conformation is governed by a combination of conjugation between the alkyne and aryl groups and inter-molecular interactions. In the more extended poly-aryl compounds steric congestion rules out any possibility of conjugation between the rings and their conformation is governed by intra-molecular non-bonded interactions in the core of the molecules and by inter-molecular interactions in their periphery. Where possible, solution NMR measurements were carried out on the poly-aryl compounds and confirmed that the solution structures are in agreement with those obtained from individual crystal.

No description available.

This thesis has been divided into five sections. The first chapter introduces the main themes of this thesis, including the description of the concepts of supramolecular chemistry, crystal engineering, hydrogen bonding and graph set analysis. The final section of chapter one describes a typical X-ray experiment used to determine the structures of the compounds presented in this thesis. Chapter two describes the synthesis and single crystal structures of copper(I) complexes with pyridine- and pyrazine-carboxylic acids. A series of novel solvent inclusion compounds of copper(I) complexes with pyridine- and pyrazine-carboxylic acids and the hydrogen bonding patterns adopted are also discussed. Chapter three reports the potential uses of boronic acids as building blocks for the design of novel solid-state architectures utilising hydrogen bonds. Novel copper(I) pyridine-/pyrazine-carboxylate complexes with boronic acid co-crystals are presented in which the heterodimeric boronic carboxylate R22(8) ring motif is present in all cases. Chapter four discusses the synthesis of novel ditertiary phosphines bearing functional groups with hydrogen bonding potential either via a three-step or single step synthetic route which involves a well known method of reductive amination followed by an efficient Mannich-based condensation. Complexation studies of these P,P-bidentate ligands with various transition metal centres such as Pt(II), Mo(0), Ru(II) and Au(I) are also presented. The effect on the structural motifs observed in these series of compounds by the regioselective incorporation of functional groups with potential hydrogen bonding capability such as hydroxyl and amide is also given. Finally, chapter five contains the synthesis and coordination studies of new phosphorus donor ligands leading to ideas for further work.

The crystal structure of a new bismuth-based light-absorbing material for the application in solar cells was determined by single crystal X-ray diffraction for the first time. (CH3NH3)3(Bi2I9) (MBI) is a promising alternative to recently rapidly progressing hybrid organic–inorganic perovskites due to the higher tolerance against water and low toxicity. Single crystal X-ray diffraction provides detailed structural information as an essential prerequisite to gain a fundamental understanding of structure property relationships, while powder diffraction studies demonstrate a high degree of crystallinity in thin films.

No description available.

<p>The Li-ion battery has, from its commercialisation in the early 1990's, now become the most widely used power source for portable low-power electronics: laptops, cellular phones and MP3-players are a few examples. To further develop existing and find new electrode materials for these batteries, it is vital to understand the lithium insertion/extraction mechanisms taking place during battery operation. In this thesis, single-crystal X-ray diffraction has been used to investigate lithium insertion/extraction mechanisms in the cathode materials V₆O₁₃ and LiFePO₄. A novel single-crystal electrochemical cell for <i>in situ</i> single-crystal X-ray diffraction studies has also been developed.</p><p>The phases Li₃V₆O₁₃ and Li_3+xV₆O₁₃, 0<x<1, both contain a disordered lithium ion. A low-temperature study of Li_3.24V₆O₁₃ (at 95 K) shows that this disorder is static rather than dynamic; the lithium ion is equally distributed above and below an inversion centre in the centrosymmetric V₆O₁₃ host structure. Short-range-ordering between this disordered lithium ion and the lithium ion inserted into Li₃V₆O₁₃ gives rise to solid-solution behaviour not observed earlier in the Li_xV₆O₁₃ system. A model is proposed for the lithium insertion mechanism up to the end-member composition Li₆V₆O₁₃.</p><p>Lithium has also been electrochemically extracted from LiFePO₄ single crystals. On the basis of the shapes of the LiFePO₄ and FePO₄ reflections, it is concluded that FePO₄ is formed at the crystal surface and that the LiFePO₄/FePO₄ interface propagates into the crystal. This is in agreement with an earlier proposed model for lithium extraction from LiFePO₄ particles.</p><p>Initial experiments with the newly developed single-crystal electrochemical cell for <i>in situ</i> single-crystal X-ray diffraction demonstrate that it is possible to insert lithium into a single crystal of V₆O₁₃ and then collect single-crystal X-ray diffraction data. The method needs further development but promises to become a powerful tool for studying lithium insertion/extraction mechanisms.</p>

The Li-ion battery has, from its commercialisation in the early 1990's, now become the most widely used power source for portable low-power electronics: laptops, cellular phones and MP3-players are a few examples. To further develop existing and find new electrode materials for these batteries, it is vital to understand the lithium insertion/extraction mechanisms taking place during battery operation. In this thesis, single-crystal X-ray diffraction has been used to investigate lithium insertion/extraction mechanisms in the cathode materials V6O13 and LiFePO4. A novel single-crystal electrochemical cell for in situ single-crystal X-ray diffraction studies has also been developed. The phases Li3V6O13 and Li3+xV6O13, 0&lt;x&lt;1, both contain a disordered lithium ion. A low-temperature study of Li3.24V6O13 (at 95 K) shows that this disorder is static rather than dynamic; the lithium ion is equally distributed above and below an inversion centre in the centrosymmetric V6O13 host structure. Short-range-ordering between this disordered lithium ion and the lithium ion inserted into Li3V6O13 gives rise to solid-solution behaviour not observed earlier in the LixV6O13 system. A model is proposed for the lithium insertion mechanism up to the end-member composition Li6V6O13. Lithium has also been electrochemically extracted from LiFePO4 single crystals. On the basis of the shapes of the LiFePO4 and FePO4 reflections, it is concluded that FePO4 is formed at the crystal surface and that the LiFePO4/FePO4 interface propagates into the crystal. This is in agreement with an earlier proposed model for lithium extraction from LiFePO4 particles. Initial experiments with the newly developed single-crystal electrochemical cell for in situ single-crystal X-ray diffraction demonstrate that it is possible to insert lithium into a single crystal of V6O13 and then collect single-crystal X-ray diffraction data. The method needs further development but promises to become a powerful tool for studying lithium insertion/extraction mechanisms.

In the frame of this thesis different calix[4]resorcin- and calix[4]pyrogallolarene derivatives were used as platform for the synthesis of novel star polymers and dendritic structures. The objectives of this work can be portrayed under the following points: First: Synthesis and modification of calix[4]resorcin- and calix[4]pyrogallolarenes with a varying number and varying type of functional sites and their precise characterization by modern NMR techniques and single crystal X-ray diffraction. Second: Synthesis of well-defined star polymers and dendrimers with different number of arms and accordingly dendrons, based on calix[4]resorcin- and calix[4]pyrogallolarenes, via convenient polymerization and generation growth reactions and analysis of the obtained products by different methods (MALDI-TOF-MS, SEC-RI and SEC-MALLS, NMR).

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.