Spelling suggestions: "subject:"slewrate enhancement"" "subject:"sleepstate enhancement""
1 |
Hybrid Envelope Tracking Supply Modulator Analysis and Design for Wideband ApplicationsJanuary 2019 (has links)
abstract: A wideband hybrid envelope tracking modulator utilizing a hysteretic-controlled three-level switching converter and a slew-rate enhanced linear amplifierer is presented. In addition to smaller ripple and lower losses of three-level switching converters, employing the proposed hysteresis control loop results in a higher speed loop and wider bandwidth converter, enabling over 80MHz of switching frequency. A concurrent sensor circuit monitors and regulates the flying capacitor voltage VCF and eliminates conventional required calibration loop to control it. The hysteretic-controlled three-level switching converter provides a high percentage of power amplifier supply load current with lower ripple, reducing the linear amplifier high-frequency current and ripple cancellation current, improving the overall system efficiency. A slew-rate enhancement (SRE) circuit is employed in the linear amplifier resulting in slew-rate of
over 307V/us and bandwidth of over 275MHz for the linear amplifier. The slew-rate enhancement circuit provides a parallel auxiliary current path directly to the gate of the class-AB output stage transistors, speeding-up the charging or discharging of out-
put without modifying the operating point of the remaining linear amplifier, while maintaining the quiescent current of the class-AB stage. The supply modulator is fabricated in 65nm CMOS process. The measurement results show the tracking of LTE-40MHz envelope with 93% peak efficiency at 1W output power, while the SRE is disabled. Enabling the SRE it can track LTE-80MHz envelope with peak efficiency of 91%. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2019
|
2 |
Power-Efficient Settling Time Reduction Techniques for a Folded-Cascode Amplifier in 1.8 V, 0.18 um CMOS / Energi-effektiva metoder för att minska insvängningstiden för en folded-cascodeförstärkare i 1.8V, 0.18um CMOSJohansson, Jimmy January 2017 (has links)
Testability is crucial in today’s complex industrial system on chips (SoCs), where sensitive on-chip analog voltages need to be measured. In such cases, an operational amplifier (opamp) is required to sufficiently buffer the signals before they can drive the chip pad and probe parasitics. A single-stage opamp offers an attractive choice since it is power efficient and eliminates the need for frequency compensation. However, it has to satisfy demanding specifications on its stability, input common mode range, output swing, settling time, closed-loop gain and offset voltage. In this work, the settling time performance of a conventional folded-cascode (FC) opamp is substantially improved. Settling time of an opamp consists of two major components, namely the slewing period and the linear settling period. In order to reduce the settling time significantly without incurring excessive area and power penalty, a prudent circuit implementation that minimizes both these constituents is essential. In this work, three different slew rate enhancement (SRE) circuits have been evaluated through extensive simulations. The SRE candidate providing robust slew rate improvement was combined with a current recycling folded cascode structure, resulting in lower slewing and linear settling time periods. Exhaustive simulations on a FC cascode amplifier with complementary inputs illustrate the effectiveness of these techniques in settling time reduction over all envisaged operating conditions.
|
Page generated in 0.0567 seconds