Abstract There is much rich solar energy in Taiwan situated at the subtropics;Therefore it¡¦s suitable for solar energy is utilized as the driving energy for absorption cooling system. Simultaneously the use of solar energyreduces our dependence on fossil fuel ,and reaches the goal of energy conservation and reduction of carbon footprint deeply.After establishing absorption cooling system in TRNSYS.16 platform, climate data TMY2 form for several cities of Taiwan are input to the simulation program. As a result of Taiwan climate variation, summer is getting more and more longer ; winter is getting shorter gradually .Hence we simulated program from March to October .Then system operating the parameters of solar collector area and the volume of the storage tank are varied to research those effects on the system performance. The research focuses on the simulation data for monthly solar fraction(f),seasonal solar fraction(F) as well as how much solar energy saved could transform carbon dioxide content for single effect and double effect absorption cooling system operated under the climate of the major cities in Taiwan .Those data could provide the design needs.

This research is aimed to study the system performance for a large solar hot water system constructed by connecting a series of small domestic natural circulation systems. There are few studies on this type of large solar hot water system available. The major concern is that when circulation pump is on, there forms a short flow between inlet and outlet of each storage tank of natural circulation solar hot water unit. Therefore, water does not have chance to flow though the collector by thermosyphon and system performance can be lowered down drastically. This thesis presents the numerical simulation study for the control and system operating parameters effects on the system performance to provide important information both for users and system designers.

In this thesis, solar energy is utilized as the driving energy for an absorption cooling system, and a TRNSYS computer code is employed to simulate the operation of the system under Taiwan climate. Climate data in TMY2 form for several major cities of Taiwan are input to the simulation program. Also system operating parameters of solar collector area and the size of the system storage are varied to study there effects on the system performance. This research provides computer simulation data for the monthly solar fraction (f) as well as the seasonal solar fraction (F) for the absorption solar cooling system operated under the climate of the major cities in Taiwan. The data can provide the design needs.

This master thesis deals with the design of a heat source for heating and DHW in an apartment building. The theoretical part contains a brief division of heat sources for an apartment building and introduction of the components of the solar system. Significant part si devoted to the T*sol software, which was used as a simulation tool for calculation of the solar system parameters. Finally, an article that addresses similar design of the solar system was analyzed. The calculation part deals with the design of the heating system. It consists of the calculation of heat losses, the design of heating elements, heat source and other components. DHW calculation is solved in two variants – var. 1 with gas condensing boiler and var. 2 with gas condensing boiler and solar system. The last part of the master thesis is dedicated to the design of a solar system for DHW using the simulation of several variants followed by selection of the optimal solution.

Solar Domestic Hot Water (SDHW) systems collect energy from the sun to heat the household water. In the context of a system energy balance, numerical simulations were conducted using the commercial software “TRNSYS-17” to study the SDHW system performance (solar fraction) influenced by the critical parameters in various sizes of the thermal storage tank (TES) tank. The key parameters were the magnitude of the collector mass flow rate, degree of thermal stratification within the TES tank, and the duration of the mass flows through the collector. An empirical correlation was obtained to determine the operating collector mass flow rate and TES volume to deliver the peak system performance. The correlation was preliminarily verified with different weather data. The studies showed that the optimal collector mass flow rate occurred when the same amount of total daily household demand passed through the collector. Furthermore, when the twofold amount of the household demand passed through the collector, the optimal dimensionless tank volume became insensitive to the change of collector flow rate and remained constant at 0.84. Researchers discovered that promoting thermal stratification within the TES tank would enhance system performance. Thermal stratification within a TES improves the system performance by sending colder water to the solar collector and hotter water to the household. This research challenges the research community’s focus on thermal stratification by showing that solar fraction is directly related to the solar collector heat losses. As such, the role of the TES tank is to supply cold fluid to the collector to minimize collector losses. Thermal stratification in the top portion of the tank is thus unimportant in influencing solar fraction. In this research, the pump is turned on/off by monitoring the temperature difference between the collector inlet and outlet. Different pump control strategies at different collector mass flow rates were implemented to adjust the pump-on time. The studies showed the system performance was negligibly affected (~0.5%) by employing different pump control strategies while the collector mass flow rate was held constant. / Thesis / Master of Applied Science (MASc)

A ground source heat pump (GSHP) system utilizes a borehole heat exchanger to extract energy from the ground during the heating season and to deposit energy during the cooling season. This requires the drilling of an extended borehole, typically ranging from 100 to 200 meters in length, with a diameter of approximately 6 to 8 inches. Inside the borehole, a U-shaped tube is placed and surrounded by a grout that aids heat transfer between the tube and the surrounding soil. A heat transfer fluid, often a mixture of water and glycol, circulates through the tube to exchange heat with the ground. During the winter, the system draws energy from the ground for household space heating, while in the summer, when air conditioning is used, it expels energy from the house into the ground. In regions with heating-dominated climates, such as Canada, more energy is withdrawn from the ground during the winter than can be naturally restored during the summer. Consequently, the soil progressively cools over time, leading to reduced heat pump coefficient of performance and a decline in the overall system efficiency. This study explores a solution to this issue by integrating solar domestic hot water systems which employ solar thermal collectors to heat water for domestic purposes. These systems are relatively straightforward, consisting of solar thermal collectors, piping, pumps, a hot water tank, and controllers. The collector area is designed to deliver high solar fractions during the summer, but it typically exhibits lower efficiency in the winter. In Toronto, annual solar fraction, defined as the proportion of energy supplied by the solar thermal system to the total energy required by the load, typically range between 50-70%. This research aims to leverage solar thermal collectors for recharging the ground during the summer months. This approach enables the installation of larger collector areas, improving system performance in the winter, while simultaneously depositing excess energy into the ground during the summer. Notably, this study focuses on a single household located in Toronto, Canada, where the recommended solar thermal collector area is 10 square meters, and the borehole heat exchanger length is 150 meters. Also, it is assumed that four people are living in this house and required energy for heating and cooling of the house are 28000 and 7000 kWh per year, respectively. This approach offers a promising solution to balance seasonal heat transfer to the ground, mitigating the long-term decline in GSHP performance. The study demonstrates that by coupling the solar thermal system with the GSHP, the targeted outcomes are achievable. / Thesis / Master of Applied Science (MASc)

The demand for cooling and air-conditioning of building is increasingly ever growing. This increase is mostly due to population and economic growth in developing countries, and also desire for a higher quality of thermal comfort. Increase in the use of conventional cooling systems results in larger carbon footprint and more greenhouse gases considering their higher electricity consumption, and it occasionally creates peaks in electricity demand from power supply grid. Solar energy as a renewable energy source is an alternative to drive the cooling machines since the cooling load is generally high when solar radiation is high. This thesis examines the performance of PV/T solar collector manufactured by Solarus company in a solar cooling system for an office building in Dubai, New Delhi, Los Angeles and Cape Town. The study is carried out by analyzing climate data and the requirements for thermal comfort in office buildings. Cooling systems strongly depend on weather conditions and local climate. Cooling load of buildings depend on many parameters such as ambient temperature, indoor comfort temperature, solar gain to the building and internal gains including; number of occupant and electrical devices. The simulations were carried out by selecting a suitable thermally driven chiller and modeling it with PV/T solar collector in Polysun software. Fractional primary energy saving and solar fraction were introduced as key figures of the project to evaluate the performance of cooling system. Several parametric studies and simulations were determined according to PV/T aperture area and hot water storage tank volume. The fractional primary energy saving analysis revealed that thermally driven chillers, particularly adsorption chillers are not suitable to be utilizing in small size of solar cooling systems in hot and tropic climates such as Dubai and New Delhi. Adsorption chillers require more thermal energy to meet the cooling load in hot and dry climates. The adsorption chillers operate in their full capacity and in higher coefficient of performance when they run in a moderate climate since they can properly reject the exhaust heat. The simulation results also indicated that PV/T solar collector have higher efficiency in warmer climates, however it requires a larger size of PV/T collectors to supply the thermally driven chillers for providing cooling in hot climates. Therefore using an electrical chiller as backup gives much better results in terms of primary energy savings, since PV/T electrical production also can be used for backup electrical chiller in a net metering mechanism.