This thesis is a part of grant assignment and focuses on the effect and properties of input material, limestone, on reactivity and speed of decarbonation. The aim of this thesis is to find the effect of chemical composition, petrography, genesis and diagenesis, porosity and microstructure of limestones on reactivity and speed and profile of decarbonation. The experimental part of thesis describes analysis of chosen limestone samples regarding porosity, reactivity by Bischof-Uhde method and process of decarbonation of calcite in term of crystallinity of product.

Tato práce je zaměřena na systém vodního vstřikování a způsoby zajištění dostatečného množství potřebné kapaliny pro správný chod tohoto systému. Jedním zajímavým a nezávislým řešením je využití odpadních produktů motoru, a to vodní páry produkované spalováním paliva. Pro zajištění kondenzace je nutné zchlazení výfukových plynů pod rosný bod páry, což lze zajistit opatřením výfukového potrubí chladiči. Vzniklý kondenzát je pak potřeba efektivně oddělit od proudu plynů a zachytit. Návrh takovéhoto systému vychází z reálně naměřených dat a jeho následným ověřením pomocí CFD simulace.

The object of this thesis was Proposal and Examination of Supercharging Alternatives of CI-engine with Exhaust Gas Recirculation according required engine power parameters. This goal was meet by use of Turbocharger with Variable Nozzles and Air-Air intercooler.

Master’s thesis deal with the design of waste to energy plant of municipal waste. The design of technology is to build the component parts of plant and basic calculation of individual apparatus. Overall technology concists of pretreatment of municipal waste, which is then stored in the bunker. Pretreatment municipal waste is fed into the counterflow rotary kiln. Flue Gates from the kilns are routed through multicyklony in the heat recovery steam generators (HRSG). The multicyklon separates the pollutants. The HRSG generates steam required properties from the feedwater from the heat kontent of gas. Superheated steam is driven to the condensing turbine with extract steam for distrikt rating and for power generation. The flue gas from the HRSG are passed through purification section, in which are separand pollutants the dry method purification. The left heat content of flue gas is used in heat exchanger with twist tube for preheating feed water for the HRSG. The flue gas are fed to the stack.

The aim of this thesis is to calculate the stoichiometric balance of boilers and boiler fuel for normal monture to 60%. Determine the monture, content depending on the conditions of the fuel in the combustion chamber and conditions of combustion. Experimental analysis of the current state of the boiler ZKG measurements using this device and propose modifications and solutions.

Analysis of the regional energy supply, shows that suitable alternative may be a combination of primary energy sources with the municipal solid waste to energy plant. Starting from the fact that the regional thermal energy needs are characterized by smaller power demand, but relatively significant seasonal fluctuations in heat supply. These factors limit the processing performance of the considered waste to energy plant that could be included in the system of regional energy supply. The aim of the thesis was to propose adequate treatment capacity for regional waste to energy plant and explore alternative solutions in off-gas cleaning for exhaust gases generated during incineration of MSW. The balance sheets of two alternative solutions off gas cleaning are part of the thesis, both in terms of material and energy consumption. Presented evaluation of economic demands alternative arrangement of off gas cleaning includes operating costs and the impact on earnings from energy production.

This master’s thesis deals with the issue of recirculating of flue-gas of pulverized coal-fired boiler. Part of the thesis are thermal calculations of mills for operational status with and without flue-gas recirculation and design of routes of recirculated flue-gas into the mills at the level of feasibility study.

This thesis deals with the issue of sorption heat pumps. The theoretical part is devoted to a detailed description of the function of adsorption and absorption heat pumps. For a better understanding of the adsorption cycle is computed theoretical thermal cycle and the heating factor of zeolite adsorption heat pump are computed. The practical part is focused on the design absorption heat pump that works in conjunction with a natural gas boiler. The pump is designed for cooling flue gas condensing boiler and the possible use of thermal energy from other low-temperature source. The thesis contains a thermal calculations, engineering design and structural design of the heat pump.

Main goal of this work is familiarization with basic features of absorption heat pumps and it’s growing importance on the market. In the first part of the work there is a research for clarifying facts associated with such pumps. In the introduction there are descriptions of basic information from the field of heating industry and its connections to our systems. Next there is a brief analysis of price changes in electricity and heat in the last five years. Main part of the analytical section is a description of the used absorption system. Second part of the work is focused on the calculation of the absorption system itself. First there is calculated internal and external part of the device according to the parameters from GE Power s.r.o. After this step there are parametric studies based on changes of key parameters of the default device for a demonstration of the behavior of a heating pump. In the end of the work there is a integration of the unit into the heating cycle for variations including flue gas condenser and using a cooling water from the turbine condenser.

The topic of this diploma thesis is the operational efficiency of heat sources. The work had several goals. The first was to determine the efficiency of the wood boiler according to available calculation methods and to compare the methods among them. The second was to determine the difference in the performance of the flue gas analyzer and the real calculation. Further, to determine the efficiency of a boiler firing different wood species - spruce and hornbeam based on their properties and elemental composition. Experimental measurement of various operating states of effectiveness took place in an older two-generation family house, which was also the subject of the project part. Due to lack of project documentation, it was necessary to focus and plot the object. Afterwards, the building was thermally inspected and the design of the heating system and the reconstruction of the whole heating system was carried out. The project was developed in two variants for two different heat sources - a heat pump and a solid fuel boiler for heating and water preparation. The thesis deals with the technical report, the conceptual solution of the related professions, the evaluation of the heat source variants and the project documentation.