No description available.

No description available.

The focus of this dissertation is the study of advanced processing techniques for multiuser interference cancellation in direct sequence code division multiple access communications. Emphasis is placed on the development of efficient techniques that are practical to implement. The work begins with a study of several sub-optimal multiuser detection techniques under a variety of conditions. Multistage parallel interference cancellation is identified as a practical and robust approach for mitigating multiple access interference. In order to reduce the effect of biased decision statistics inherent to parallel cancellation, a low-complexity modification to parallel interference cancellation that significantly improves performance is derived. Based on this approach, two real-time DSP implementations are devised, one fully coherent and one non-coherent. Multi-symbol differential detection is then explored as an alternative for improving the performance of the non-coherent approach. Additionally, dual-antenna diversity techniques are also investigated as a means for improving performance in multipath environments. / Ph. D.

Parallel interference cancellation for DS-CDMA has been shown to suffer from biased amplitude estimates if a matched-filter estimator is used. The bias magnitude is proportional to the number of interfering users. For heavy system loads, the bias has been shown to adversely effect the accuracy of the interference cancellation process, thereby impairing BER after cancellation. Empirical simulation work has demonstrated that weighting down interference estimates can improve BER performance. This thesis substantiates these BER improvements by modelling and analyzing a soft interference cancellation technique which mitigates the effects of the bias by minimizing BER after cancellation in a bit-synchronous parallel interference cancellation CDMA receiver. We analyze system decision metrics with down-scaled interference estimates and determine both the mean and variance of the biased decision statistics. From these two metric moments, system BER is evaluated, and the optimal interference scaling function which minimizes BER is derived. We demonstrate BER performance enhancements by simulating this soft interference cancellation technique in systems under perfect power control and in the near-far situation. We further discuss the applicability of the results to asynchronous systems. / Master of Science

The developing field of smart structures and skins provides an application to which fiber optic sensors bring unique capabilities and benefits. The primary cost in a network of fiber sensors is in the sources, receivers and associated hardware and can be prohibitive for a large number of sensors. Multiplexing of sensors based on spread spectrum techniques offers an efficient and cost effective solution to this limitation. The system hardware developed in this research work is capable of the real time monitoring of a four sensor network. Experimental results with embedded and attached Extrinsic Fabry Perot Interferometers (EFPI) are presented. The system can be used to multiplex any type of sensor which translates the measurand into intensity variations of the light. A measure of the system efficiency is obtained using crosstalk measurements. A suppression of 40 dB has been obtained between the desired sensor signal and the interference. The effect on system performance has been observed by varying system parameters such as code length and separation between codes. Highly sensitive embedded interferometric sensors have been used in a multimeasurand environment to measure temperature and strain. A solution to the inherent 'near-far' problem in an optical COMA system has been proposed and results for the same are presented. A novel WDM/CDM hybrid (Wavelength Division Multiplexing/Code Dhtision Multiplexing) scheme has been proposed to increase the light intensity at the detector thereby increasing the number of sensors in the system. Methods to optimize and upgrade the system are discussed. / Master of Science

No description available.

Fourier telescopy imaging is a recently-developed imaging method that relies on active structured-light illumination of the object. Reflected/scattered light is measured by a large “light bucket” detector; processing of the detected signal yields the magnitude and phase of spatial frequency components of the object reflectance or transmittance function. An inverse Fourier transform results in the image. In 2012 a novel method, known as time-average Fourier telescopy (TAFT), was introduced by William T. Rhodes as a means for diffraction-limited imaging through ground-level atmospheric turbulence. This method, which can be applied to long horizontal-path terrestrial imaging, addresses a need that is not solved by the adaptive optics methods being used in astronomical imaging. Field-experiment verification of the TAFT concept requires instrumentation that is not available at Florida Atlantic University. The objective of this doctoral research program is thus to demonstrate, in the absence of full-scale experimentation, the feasibility of time-average Fourier telescopy through (a) the design, construction, and testing of smallscale laboratory instrumentation capable of exploring basic Fourier telescopy datagathering operations, and (b) the development of MATLAB-based software capable of demonstrating the effect of kilometer-scale passage of laser beams through ground-level turbulence in a numerical simulation of TAFT. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2015. / FAU Electronic Theses and Dissertations Collection

Not available

This dissertation exammes two of the rlsing technologies in the world of wireless, cellular communications - CDMA and the software radio. This thesis covers many of the issues related to these two emerging field s of wireless communications, establish ing a theoretical framework for the broader issues of implementation. To this end, the thesis covers many of the basic issues of spread spectrum communications, in addition to establishing the need for, and defining the role of, the software radio. Amalgamation of these two key areas of interest is embellished in a presentation of many of the concerns of implementing a specific CDMA system on a particular type of software radio - the Alcatel Altech Telecomms Flexible Radio Platform. Of primary concern in the research methodology embraced in this thesis is the mastering of a variety of analysis and implementation tools. Once the theoretical background has been substantiated by current expositions, the thesis launches along a highly deterministic route. First, the research issues are tested in a mathematical environment for suitability to the given task. Second, an analysis of the appropriateness of the technique for the software radio environment is undertaken, culminating in the attempted deployment within the hardware environmenl. Rigorous testing of the input/output mapping characteristics of the hardware instantiations created in this manner complements the research methodology with a viability study. This procedure is repeated with many elements of the CDMA system design as they are examined, simu lated, deployed and tested. / Thesis (M.Sc.Eng.)-University of Natal, Durban, 2000.

No description available.