The aim of this work is comparison of special form tools for manufacture of grooves in rotor turbine. For this purpose tools are chosen from „A“ and „B“ company. Form milling cutters are confronted both in terms of their characteristic features, manufacturing methods, and time and economy intensity. Furthermore, there is described a possible future way of grooves‘ production through the use of the „C“ ‘s programme. Apart from that, this thesis also involves simple programme for comparing the chosen parameters.

The master´s thesis concentrates on a project of steam turbine with controlled extraction points destined for a communal waste incineration plant. First, there the history of devices using steam as a moving medium is introduced and than follows the description of computing program, where the calculation was running. The master´s thesis subject consists in the thermodynamic project of turbine vaning, in basic project of gearbox including the check calculations and in technical economic comparison of single shaft and twin shaft constructional design. The design documentation is worked up according to the calculated outcomes and contains longitudinal section of turbine and dispositional turbine and gearbox settlement.

The diploma thesis deals with computer simulation of processes in the field of energy utilization of waste and biomass. The first part contains description of energy utilization from waste and biomass and fundamental devices of energy systems. There is also described methodology of modeling and techniques used for processes simulation. The next part is focused on mathematical models explanation of processes with constant and variable efficiency. In practical work are compared results from individual considered mathematical models with real data which were obtained from the real operation of waste energy plant. With use of gained mathematical models is considered model situation of cogeneration in the device of biomass and coal co-firing. At the end of this work is suggested implementation of created mathematical models into simulation program W2E.

Condensing steam turbine. Master's thesis of master's studies of 2th years. This master's thesis is technical research. The contents of this technical research are an analysis of a mechanical equipment of that are used for condensing steam turbine, thermodynamic calculations of passage channel for specified inlet and outlet conditions of steam, design and construction, drawing of the turbine axial cross section, operating scheme of turbine and economic analysis of operation.

This master thesis deals with axial dendritic suspension of steam turbine rotor blade. The initial shape of the suspension was design on the basis of available data. There was performed stress-strain analysis of this shape and most dangerous spots were picked. There were made several geometrical changes of the shape of suspension. Their affection on stress-strain responding of the suspension was examined. The best shape was chosen which was used to perform analysis of infinite life according to ASME code and due to loading low cycle fatigue analysis. According to results of low cycle fatigue analysis the maximum loading was established. At the end of this work the further steps were suggested.

This thesis named Cosdensing steam turbine in combi-cycle deals with the calculation of thermal balancing scheme and the design of turbine. This double body steam turbine with combined HP-IP part and double-flow LP part does not have any additional samples of technological steam. LP part has two side outputs to the water-cooled condensers. There is a basic calculation of force effects on the LP part at operation. The thesis also includes a drawing of a longitudinal cut of LP part and its layout, including positron of the condensers.

There is a description of modernisation steam condensing turbine in this Master´s thesis. Electric output is decreased from 250 MW to 160 MW. This thesis is divided into two parts, there is a calculation of heat balance in first part and a calculation of blading in second part. Detail drawing and heat balance are the most important results of this Master´s thesis.

V diplomové práci je krok po kroce vypracováno řešení zabezpečení energetického zdroje pro typické město v Sibiřské oblasti. Data, která tvoří zadání, byla získána od zákazníka pomocí dotazníku, protože pro nás oblast v čase vypracování nebyla dostupná. Na základě informací o aktuální energetické situaci, obyvatelstvu a dřevospracujícímu průmyslu je vybrána vhodná technologie pro zabezpečení tepla a elektrické energie. Druh zdroje byl vybrán dle dostupného paliva a následně byl proveden výpočet a design en- ergetického zdoje založeného na Rankine Clausiovém cyklu. Řešení obsahuje technický i ekonomický návrh. Technické řešení ukázalo, že nejdůležitější parametry jsou spolehlivost, bezpečnost a jednoduchost řešení. Design sítí, přídavných zařízení a plánování údržby není obsahem této práce. O dalších projektových krocích pojednává závěr.

The diploma thesis deals with the design of a high-speed steam turbine at given parameters provided by G-Team a.s. in Velka Bíteš. The introductory part briefly focuses on historical development of steam turbines, their operational principle and process of energy transformation. In the main part the machinery analysis of high-speed turbines has been carried out. In addition, a preliminary design of the number of turbine stages has been done. Furthermore, a thermodynamic calculation of flow channel for given input and output paramaters has been done together with the conception of construction design and turbogenerator layout. The final part introduces technical comparison of a one-stage and multy-stage high-speed steam turbine.

The thesis is focused on designing of condensing steam turbine with reheating for combustion of biomass. The turbine is developed to be tandem compound-regenerative with five uncontrolled extraction points. Optimization of reheating pressure is made in the turbine's cycle. The turbine outlet is constructed to lead down to the water cooled condenser. Thesis includes the calculation of heat cycle with the draft of flow channel of high pressure and middle-low pressure turbine. Detailed calculation of middle-low pressure turbine, including stress-strength analysis, is performed. The thesis provides an evaluation of flow scheme of 100 % and 75 % of generator’s power output and the drawing of middle-low pressure turbine in longitudinal section.