No description available.

No description available.

No description available.

Central Appalachian headwater streams in coalfield areas are prone to mining disturbances, and compensatory mitigation is required in cases of documented impacts. Stream construction on reclaimed mines is a common mitigation strategy. Streams constructed as compensatory mitigation are meant to restore structural and functional attributes of headwater streams and are often evaluated by measuring structural ecosystem characteristics. However, replacement of stream ecosystem functions is essential for mitigation of mining disturbances from an ecosystem perspective. This research compared selected structural and functional measures in eight constructed streams on mined areas to those of four forested reference streams across two years. Three organic matter functions were evaluated: riparian litterfall input, leaf breakdown, and periphyton accrual. Constructed streams were typically warmer than reference streams and also had elevated specific conductance, elevated oxidized nitrogen concentrations, depressed benthic macroinvertebrate richness, and lower levels of canopy cover. Functionally, litterfall input and total leaf breakdown means for constructed streams were approximately 25% and 60% of reference means, respectively. Leaf breakdown in constructed streams appeared to be inhibited as a result of reduced processing by benthic macroinvertebrates as well as inhibition of microbial and physicochemical pathways. Constructed streams with total breakdown rates most similar to reference-stream levels had the coldest stream temperatures. Areal periphyton biomass, benthic algal standing crop, and senescent autotrophic organic matter in constructed streams were roughly quadruple, double, and quintuple those of reference streams, respectively. Indicator ratios also suggested stream-type differences in periphyton structure. Mean algal accrual was greater in constructed streams than in reference streams during leaf-on seasons. My results suggest that light is likely the primary factor driving accrual rate differences during summer and fall, but that temperature may also be important during fall. Planting a diverse assemblage of native riparian trees and ensuring their successful development can inhibit benthic irradiance and thermal energy inputs while providing similar quantity and quality of OM to constructed streams, thereby fostering replacement of reference-like OM functions in some streams. / Ph. D.

Restoring hydrologic connectivity between the channel and floodplain is a common practice in stream and river restoration. Floodplain hydrology and hydrogeology impact biogeochemical processing and potential nutrient removal, yet rigorous field evaluations of surface and groundwater flows during overbank floods are rare. We conducted five sets of experimental floods to mimic floodplain reconnection. Experimental floods entailed pumping stream water onto an existing floodplain swale, and were conducted throughout the year to capture seasonal variation. Each set of experimental floods entailed two replicate floods occurring on successive days to test the effect of varying antecedent moisture. Water levels and specific conductivity were measured in surface water, shallow soils, and deep soils, along with surface flow into and out of the floodplain. Total flood water storage increased as vegetation density increased and or antecedent moisture decreased. Hydrologic flow mechanisms were spatially and temporally heterogeneous in surface water, in groundwater, as well as in exchange between the two and appeared to coexist in small areas. Immediate propagation of hydrostatic pressure into deep soils was suggested at some locations. Preferential groundwater flow was suggested in locations where the pressure and electrical conductivity signals propagated too fast for bulk Darcy flow through porous media. Preferential flow was particularly obvious where the pressure signal bypassed an intermediate depth but was observed at a deeper depth. Bulk Darcy flow in combination with preferential flow was suggested at locations where the flood pressure and electrical conductivity signal propagated more slowly yet arrived too quickly to be described using Darcy's Law. Finally, other areas exhibited no transmission of pressure or conductivity signals, indicating a complete lack of groundwater flow. Antecedent moisture affected the flood pulse arrival time and in some cases vertical connectivity with deeper sediments while vegetation density altered surface water storage volume. Understanding the variety of exchange mechanisms and their spatial variability will help understand the observed variability of floodplain impacts on water quality, and ultimately improve the effectiveness of floodplain restoration in reducing excess nutrient in river basins. / Master of Science

The pollution of streams and rivers is a growing concern, and environmental guidance increasingly suggests stream restoration to improve water quality. �Solute retention in off channel storage zones such as hyporheic zones and floodplains is typically necessary for significant reaction to occur. �Yet the effects of two common restoration techniques, in stream structures and inset floodplains, on solute retention have not been rigorously compared. �We used MIKE SHE to model hydraulics and solute transport in the channel, inset floodplain, and hyporheic zone of a 2nd order stream. �We varied hydraulic conditions (winter baseflow, summer baseflow, and storm flow), geology (hydraulic conductivity), and stream restoration design parameters (inset floodplain length, and presence of in stream structures). �In stream structures induced hyporheic exchange during summer baseflow with a low groundwater table (~20% of the year), while floodplains only retained solutes during storm flow conditions (~1% of the year). �Flow through the hyporheic zone increased linearly with hydraulic conductivity, while residence times decreased linearly. �Flow through inset floodplains and residence times in both the channel and floodplains increased non linearly with the fraction of bank with floodplains installed. �The fraction of stream flow that entered inset floodplains was one to three orders of magnitude higher than that through the hyporheic zone, while the residence time and mass storage in the hyporheic zone was one to five orders of magnitude larger than that in floodplain segments. �Our model results suggest that in stream structures and inset floodplains are complementary practices. / Master of Science

Vane-type in-stream structures and step pool storm conveyance (SPSC) are more ecologically friendly alternatives to traditional stream channel stabilization and stormwater conveyance techniques. Vane-type structures have been widely accepted as elements of stream restoration projects and are regularly implemented in streams throughout the United States. However, these structures commonly experience partial or total failures of function or stability, often due either to improper installation or misapplication. This study undertook a thorough review of the available design guidance for the single-arm vane, j-hook vane, cross vane, and w-weir, which revealed that the existing guidance is composed of non-standardized recommendations largely based on practitioner experience and rules of thumb. Existing guidance was synthesized with current structure research and practitioner surveys to create factsheets for each of the four structures and the SPSC, with the intent of improving structure application and offering concise general guidance. This study also endeavored to improve the design of the SPSC by determining the most accurate of several common prediction methods for Manning's roughness coefficient n, used in SPSC design velocity calculations. This was done by using Rhodamine WT dye tracer experiments to determine n values during storm flows in two SPSC structures in Annapolis, MD, which were then compared to predicted n values. Values of Manning's n determined in the SPSCs at low flows (0.28-12) often exceeded the predicted n values (-0.17-3.9) by several orders of magnitude. Though the applicability of these results is limited, an increase in design n to 0.1-0.2 is still recommended. / Master of Science / Vane-type in-stream structures are stone or wood structures installed within a stream channel for purposes such as streambank stabilization or aquatic habitat creation. Step pool storm conveyance (SPSC) is a technique which converts an existing steep stream or gully into a step-pool channel. Both of these techniques are more ecologically friendly than many traditional stream channel stabilization or stormwater conveyance techniques such as riprap or concrete storm drains. Vane-type structures in particular have been widely accepted as elements of stream restoration projects and are regularly implemented in streams throughout the United States. However, these structures commonly experience partial or total failures, either through structural collapse or failure to function properly. This is often either because they were improperly installed or because they were installed at a stream site where they were inappropriate or unnecessary. A review of the available guidance for the design of these structures revealed that the existing guidance is composed of non-standardized and sometimes contradictory recommendations which are largely based on designer trial and error and rules of thumb, rather than on the results of scientific experiments or modeling. The goal of this study was to improve the success of vane-type in-stream structures and the SPSC by providing factsheets offering clear and concise general design guidelines and sound recommendations for structure application. Flow studies of two SPSC structures in Annapolis, MD were also conducted to improve the design of that structure by measuring its flow characteristics in the field.

Instream structures are used to reinforce channel margins, redirect flows, and create habitat, but there is little consensus about their design or whether they function as intended. In this study, 536 instream structures in the state of Maryland were assessed to determine the effect of structure-, project-, and watershed-scale factors on performance. Structures were assessed using a 19 point scoring system based on structural stability, sediment transport, and overall function. Structure-scale variables related to the construction, geometry, and placement, and differed for six structure families: bank protection (BP), full and partial span vanes (FSV), constructed riffles (RF), regenerative stream conveyances, and step pools. Project- and watershed-scale variables related to flow, erosion resistance, and design approach. Relationships between structure scores and explanatory variables were evaluated using regression analysis. Structure performance was strongly influenced by the individual project, suggesting that design quality, construction, and maintenance are as important as specific design features. Structure durability decreased if there was additional urban development following construction. Results also indicated that restoration activities have a "protective effect" on nearby structures. For rock BP, imbricated rock walls performed better than stone toe, due to increased structure height and boulder size. Rock FSVs that were keyed into the bank at angles between 35° and 90° were more durable, while RFs performed best when constructed using downstream grade control and increased substrate depth. The results of this study provide insight into design and project features that contribute to structure success. / Master of Science / Stream restoration aims to rehabilitate streams that have been impacted by humans, and log or rock structures in the channel are utilized to protect the bed and banks, redirect water away from the banks, and create habitat for aquatic organisms. However, there are few design standards for these structures. In this study, 536 instream structures in the state of Maryland were assessed to determine the effect of design and site characteristics on performance. Structures were scored for performance based on structural stability, sedimentation, erosion, and function. Design characteristics related to structure construction and placement, while site conditions related to the project and watershed characteristics. Statistical analyses were used to determine the relationship between structure performance and design and site characteristics. Structure performance was strongly influenced by the restoration project, indicating that design quality, construction, and maintenance are as important as specific design features. Structure durability decreased if there was additional urban development in the watershed following construction. Results also indicated that when structures were used in series, there was a "protective effect" on other nearby structures. Rock walls performed better as height increased, while rock weirs that were constructed into the streambank between 35° and 90° were more durable. These results provide insight into design and project features that contribute to structure success.

Stream morphology is an important aspect of many hydrological and ecological applications such as stream restoration design (SRD) and estimating sediment loads for total maximum daily load (TMDL) development. Surveying of stream morphology traditionally involves point measurement tools, such as total stations, or remote sensing technologies, such as aerial laser scanning (ALS), which have limitations in spatial resolution. Terrestrial laser scanning (TLS) can potentially offer improvements over other surveying methods by providing greater resolution and accuracy. The first two objectives were to quantify the measurement and interpolation errors from total station surveying using TLS as a reference dataset for two fluvial applications: 1) measuring streambank retreat (SBR) for sediment load calculations; and 2) measuring topography for habitat complexity quantification. The third objective was to apply knowledge uncertainties and stochastic variability to the application of SRD. A streambank on Stroubles Creek in Blacksburg, VA was surveyed six times over two years to measure SBR. Both total station surveying and erosion pins overestimated total volumetric retreat compared to TLS by 32% and 17%, respectively. The error in SBR using traditional methods would be significant when extrapolating to reach-scale estimates of sediment load. TLS allowed for collecting topographic data over the entire streambank surface and provides small-scale measurements on the spatial variability of SBR. The topography of a reach on the Staunton River in Shenandoah National Park, VA was measured to quantify habitat complexity. Total station surveying underestimated the volume of in-stream rocks by 55% compared to TLS. An algorithm was developed for delineating in-stream rocks from the TLS dataset. Complexity metrics, such as percent in-stream rock cover and cross-sectional heterogeneity, were derived and compared between both methods. TLS quantified habitat complexity in an automated, unbiased manner at a high spatial resolution. Finally, a two-phase uncertainty analysis was performed with Monte Carlo Simulation (MCS) on a two-stage channel SRD for Stroubles Creek. Both knowledge errors (Manning's <i>n</i> and Shield's number) and natural stochasticity (bankfull discharge and grain size) were incorporated into the analysis. The uncertainty design solutions for possible channel dimensions varied over a range of one to four times the magnitude of the deterministic solution. The uncertainty inherent in SRD should be quantified and used to provide a range of design options and to quantify the level of risk in selected design outcomes. / Ph. D.

<p>The aim of this work is to analyze if a change in the benthic community can be detected two years after a restoration of a small stream. The samples were taken in a small stream at Tinnerö Eklandskap just south of Linköping. In addition to the restored area, two reference sites upstream and downstream of the restored area were sampled to compare to the restored site. The method used for sampling of benthic fauna in the stream was kick sampling. ASPT, Berger-Parker and Renkonen-indices were used to find out if there was any difference between the reference areas and the restored area. In addition to indices, rank-abundance curves and species lists were made to see if there was any trend difference between the different areas. The only index that showed a difference between the different areas was Berger-Parker diversity index. The reason why there were no greater differences between the areas may be due to the fact that two years is too short to allow time for the benthos to re-colonize the restored area.</p>