The aim of this diploma thesis is design of the boring machine for longitudinal and transverse drilling of holes, which is primary intended for manufacture of furniture from wood materials. Concept of this machine is defined as last segment of production line, which is terminated by stacking container for transport dose. The aim of this thesis is create a variants of machine design and manipulating device and justify the choice of the optimal option. For own design is necessary to create a construction calculations.

This diploma thesis deals with the design of hydraulic trash rack cleaning machine for waste water treatment plant. The first part of the thesis describes methods of removing coarse impurities from intake water to technological equipment. Furthermore, a specific design including calculation and choice of the drive is made. Part of the work is also solving the course of force effects and strength analysis of the most stressed parts. The work also deals with the comparison of design solution of hydraulic and mechanical drive of the machine. The attachment contains a drawing of the cleaning machine assembly and selected welded complex.

This Masters thesis examines the production of a revolver frame and the implementation of a new CAM system for the manufacturing process. This thesis contain four parts. The first part is focused on the current manufacturing process. The second part of the thesis consists of a new proposal to use progressive rotary tools and elements of automation for inspection by the Equator Gauging System. The third part proposes a new manufacturing strategy for the revolver frame. At the end of the thesis, the production times of proposed and current technologies are compared.

The diploma thesis deals with the design of an injection mold for manufacturing double elbow, which finds its use in the siphon assembly. The part will be made of polypropylene with the trade name Tatren HT 25 11. The production batch size is set at 100,000 units in 3 months. Firstly, the analysis of the part is done including a detailed specification of its function and criteria that must be met by the component. Furthermore, a suitable technology for the production of the part is chosen. The theory of injection molding and mold design is made on the basis of the chosen injection technology. Subsequently, in the practical part is made a complete design of injection mold including technological calculations and simulations. An injection molding machine is chosen for the proposed injection mold. The conclusion of the thesis consists of technical - economic evaluation of the production of double elbow.

The project elaborated design of injection mould for production of corner cover, which serves to protect a reprobox from mechanical damage. The production possibilities were considered at the beginning. The injection molding technology was chosen from available technologies. The first part of the thesis is theoretic, plastics and injection molding are investigated. The choice of suitable polymer and the entire draft of mold is in the second part of thesis. The final mold is two-cavity with cold runner system. The technical and economic assessment of the proposal is carried out in the last part of thesis.

This diploma thesis deals with the construction of an NC rotary table with a linear axis. The first part is devoted to the analysis of the current state of science and technology in the problem, the use of various drives, mechanisms for torque transmission, linear feed lines, measuring and an overview of tables from various manufacturers. Furthermore, the work is devoted to the creation of 4 variants of construction, then the selection of the best variant and technical calculations. At the end, the work deals with a detailed description of the machine.

The diploma thesis deals with the capability assessment of an optical coordinate measuring machine according to VDA 5. The capability assessment is an effective tool for deciding whether the evaluated measuring machine is capable for the intended use and under which conditions its use is possible. The theoretical part of the thesis is devoted to the analysis of coordinate measuring machines, with a closer focus on a subset of optical measuring machines and the analysis of their capability assessment procedures. In the practical part of the thesis, the selected procedure is applied on the specific measuring machine Micro-Vu Sol 311. The main contribution of this thesis is a description of the possibilities of the considered coordinate measuring machine for its further use in the educational process at the Faculty of Mechanical Engineering of Brno University of Technology.

The aim of this diploma thesis is to create a comprehensive study of measurement accuracy of coordinate measuring machine (hereinafter CMM) Zeiss UPMC 850 Carat S-ACC (hereinafter Zeiss Carat) for the needs of the national metrological institute in Brno in accordance with ČSN EN ISO / IEC 17025 and the follow-up system standards of the ČSN EN ISO 10360 series. Additionally, it includes the creation of instructions for the calculation of measurement uncertainty, which will be put into effect in an accredited calibration laboratory. The first part of the work focuses on the description of the current state of knowledge and the definition of basic concepts in the field of metrology and accurate measurements on CMM. The second part describes the Zeiss Carat measuring machine, identifies the individual contributors to the resulting measurement uncertainty and defines the methodology for their quantification. The last part deals with the evaluation of calibration data and the calculation of the expanded measurement uncertainty of the Zeiss Carat instrument, which is used to quantify its accuracy.

This master’s thesis deals with a permanent magnet synchronous machine calculation. In the first part of the thesis, the synchronous machine in general is described. Knowledge of these machines is essential for the remaining parts of the thesis. In the next part, an analytical calculation process of a given permanent magnet synchronous machine is presented. The given machine had already been manufactured before the thesis assignment. The calculation is to be adapted to the given machine. This way the parameters of the calculated machine should match the reference machine. The accuracy of the calculation can then be evaluated. Furthermore, calculations of the machine using Ansys RMxprt and Ansys Maxwell 2D are presented. The calculations are then compared with data obtained by measurements performed on the given machine. In the last part of the thesis, a modification in the analytical calculation is made to reduce the inaccuracy of the calculation. The thesis is concluded by evaluating the results.

The diploma thesis deals with the design of a rotary table for machining large non-rotary workpieces up to a maximum weight of 65 000 kg. The aim of the work is to analyze and evaluate the current state of knowledge in the field of rotary tables, to create a table design according to the assignment and its 3D model with part of the drawing documentation. The theoretical part of the work searches for solutions used in the construction of rotary tables in the category of table according to the assignment. The information obtained is further used in the design of rotary table solution variants. By evaluating the weight of the required properties and their degree of fulfillment, a variant of the design solution of the table is selected, which is then designed. The individual design steps are described and explained in the text part of the work accompanied by pictures and calculations. The result of the process is a structural design of the mechanical part of the rotary table with a 3D model and partially processed drawing documentation. The contribution of the work is the summarization of relevant information for the design of rotary tables, the processed procedure of solving the design of the table and the modeled design of the rotary table. These outputs can be further treated as documentation for the production of the designed table, the development of the rotary table design to deeper details or technical development in this area.