Metallic nanoparticles (NPs) are exploited for their ability to interact with organic compounds and to increase significantly the fluorescence intensity and the photostability of many fluorescent dye molecules. Metal enhanced fluorescence (MEF) is therefore widely investigated for biosensing applications. When used in immunoassays, silver island films (SIFs) could augment the fluorescence intensity of fluorescein by a factor of seventeen; SIFs were also able to double or triple the emission intensity of cyanine dyes which are commonly used in (deoxyribonucleic acid) DNA microarrays. The emission intensity of indocyanine green — widely used as a contrast agent in medical imaging — was about twenty times higher in the proximity of SIFs. This enhancement phenomenon — due to the surface plasmon polaritons associated with the metallic NPs — can be explained by energy transfer from the metal NPs to the fluorescent dye molecules or by a modified local electromagnetic field experienced by the fluorophores in the vicinity of metal surfaces. Our research focused on the optical characterization of colloidal gold-silver alloy NPs containing different ratios of gold and silver (Au_1.00-Ag_0.00, Au_0.75-Ag_0.25, Au_0.50-Ag_0.50, and Au_0.25-Ag_0.75), as well as their interaction with three fluorophores: rose bengal, rhodamine B, and fluorescein sodium. Depending upon the dye quantum yield and its concentration in solution, enhancement or quenching of fluorescence was obtained. Thus, a three to five times increase in fluorescence intensity was observed in a 2.0 mM solution of rose bengal with all nanoalloys, a slight enhancement of fluorescence (1.2 – 1.6 times) was noticed in a 0.13 mM solution of rhodamine B with all four types of NPs, and fluorescence quenching occurred in all the fluorescein-NP solutions regardless of the dye concentration. / Master of Science

Title: Optical Responses of Biomolecules on Regular Metal Plasmonic Nanostructures Author: Martin Šubr Department: Institute of Physics of Charles University Supervisor of the doctoral thesis: prof. RNDr. Marek Procházka, Dr., Institute of Physics of Charles University Abstract: Adsorption of molecules on metal plasmonic nanostructures leads to significant enhancement of many optical processes, such as Raman scattering (surface-enhanced Raman scattering - SERS) or fluorescence (surface-enhanced fluorescence - SEF). Two groups of substrates were tested within this thesis: (i) Silver nanorods prepared by oblique angle vapor deposition, and (ii) silver and gold nanoislands growing on magnetron-sputtered polytetrafluoroethylene film. Step-by- step optimization process was performed on the nanoislands in order to obtain optimum SERS sensitivity and reproducibility. Detailed SERS intensity profiles were obtained using gradient nanostructures with the localized surface plasmon resonance (LSPR) condition varying across the sample and three different excitation wavelengths. It was also found that spectral position and height of the LSPR band can be controlled simultaneously using mixed gold/silver nanoislands. Detailed investigation of polarization- and angular- dependences of anisotropic silver nanorods was...

This study focuses on preparing surface enhanced fluorescence (SEF) substrates for use in the enhancement of the emission signal of rhodamine B and fluorescein dyes. Fluorescence spectroscopy has been widely utilized owing to its high sensitivity. SEF is a process where the interactions of fluorophores with the localized surface plasmons of metal nanoparticles results in fluorescence enhancement, increased photostability and rates of system radiative decay which leads to a decreased lifetime. One of the most important factors of SEF studies is to provide a uniform distance between fluorophore and metal nanoparticle in a controlled manner / otherwise, F&ouml / rster resonance energy transfer takes place from fluorophore to metal nanoparticle and emission intensity of fluorophore is quenched. The spherical gold and silver nanoparticles were prepared using the well known and straightforward chemical reduction method, in which sodium citrate acted both as a reducing agent and a stabilizer around the formed nanoparticles. Silver and gold were chosen because of their high plasmon field enhancement. Since plasmon field strongly depends on the shape and size of the nanoparticles, the prepared nanoparticles were characterized using absorption spectroscopy and field emission scanning electron microscopy (FE-SEM). Prior to deposition of silver or gold nanoparticles on glass slides, the slides were derivatized by immersing them into an aqueous solution of 3-Aminopropylethoxysilane (APTES). Following derivatization, silver or gold nanoparticles were deposited by immersing the slides into the colloid mixture. Metal nanoparticle coated slides were characterized using absorption spectroscopy and field emission scanning electron microscopy (FE-SEM). Surface enhanced Raman scattering (SERS) measurements were carried out to observe the plasmon efficiency of the deposited nanoparticles. The SERS measurements were repeated for the duration of two weeks in order to check the stability of the plasmon efficiency. In this study, different types of materials (silica, zinc oxide, gold, stearic acid.) were employed as spacers to observe their effects on fluorescence enhancement. Physical vapor deposition (PVD) and Langmuir-Blodgett (LB) film deposition techniques were used for the formation of the spacer within the substrate. Fluorescence enhancement of rhodamine B and fluorescein was observed on the prepared SEF substrates. Obtained enhancement factors indicate that SEF substrates have the potential for sensitivity improvements of fluorescence sensing in many fields.