No description available.

Detection, identification and separation of polycyclic aromatic compounds in environmental samples are of extreme importance since many of these compounds are well known for their potential carcinogenic and/or mutagenic activities. Selective quenching of molecular fluorescence can be utilized effectively to analyze mixtures containing different polycyclic aromatic hydrocarbons. Molecularly organized assemblies are used widely in detection and separation of these compounds mainly because of less toxicity and enhanced solubilization capabilities associated with these media. Feasibility of using nitromethane and the alkylpyridinium cation as selective fluorescence quenching agents for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is critically examined in several molecularly organized micellar solvent media. Fluorescence quenching is used to probe the structural features in mixed micelles containing the various combinations of anionic, cationic, nonionic and zwitterionic surfactants. Experimental results provide valuable information regarding molecular interactions between the dissimilar surfactants.

Estuary is a complex region due to the mixing of fresh and sea water as well as the mixing of terrestrial and marine dissolved organic matters (DOM), so that the sorption behavior between hydrophobic organic compounds and dissolved organic matters is very complicated to estimate. By applying fluorescence quenching method, we investigated the influence of the mixing of binary dissolved organic matters from different sources on the binding constant (Kdoc) of pyrene and DOM. Results show that the kinetic of mixing of binary DOMs influences the binding constant, that means if there weren¡¦t enough standing time for mixing of binary DOMs, it would cause some bias in estimating the binding constants of pyrene and DOMs mixture. In this study, we also found that there exists a linear relationship on the binding constants between pyrene and DOMs mixture against mixing ratios. In addition, the mixing mechanism of SRNOM and LHA was dominated by diffusion process from the results of initial mixing efficiency. However, the diffusion process might not be the only mechanism of the mixing reaction of SHHA and LHA, other factors should be considered. Further investigations should be done to find out the dominating factors on the mixing of SHHA and LHA system in the future.

In this study, we measured the binding constant, KCOC, between several humic acids and benzo(h)quinoline, a nitrogen contained PAHs via using fluorescence quenching method. KCOC of humic acids and phenanthrene, a parent PAHs, is also studied in comparison. Moreover, pH and ionic strength effect on the KCOC were investigated. According to our results, the phenanthrene¡¦s KCOC decreases as the pH increases due to the lower hydrophobicity of humic acid in higher pH values. The variation of benzo(h)quinoline¡¦s KCOC with pH exhibits a more complicated trend, with a maximum value at pH close to the pKb of benzo(h)quinoline. For pH lower than pKb, benzo(h)quinoline is protonated to be benzo(h)quinolinium, a cation, so that the ionic exchange is the dominant prosess in sorption mechanism. Therefore, the binding sites of humic acid increase with pH such that the KCOC increases with pH. In contrast, different mechanism involved in the binding for pH higher than pKb, neutral benzo(h)qunoline becomes dominant and hydrophobic interaction controls the binding prosess in sorption mechanism. At last, the composition of different functional groups of humic acid is also found significant in the binding affinity of benzo(h)qunoline or phenanthrene. Moreover, the benzo(h)qunoline¡¦s KCOC exhibits decreasing trend with increasing magnesium ionic strength because of the reduction of molecular size as well as the benzo(h)qunoline binding sites of humic acid. Findings from this study could provide valuable information for numerical simulation of transport and fates of HOPs in aquatic environment.

<p>Abstract</p><p> Hfq is a pleiotropic posttranscriptional regulator and RNA chaperone that facilitates annealing of trans-encoded sRNA/mRNA pairs. It regulates many different cellular pathways including environmental stress responses, quorum sensing, virulence and maintenance of membrane integrity. Hfq is a member of the Sm/LSm family and forms a homohexamer that has two faces, termed proximal and distal. Hfq preferentially binds A/U rich regions that are near stem loop structures. Crystal structures have shown that poly-A sequences tend to bind the distal face while poly-U sequences bind the proximal face. Currently crystal structures reveal the binding mechanisms for short RNA sequences however; physiologically relevant RNA sequences are typically longer and more structured. To study how these more complex RNA sequences interact with Hfq, a tryptophan fluorescence quenching (TFQ) assay has been developed. Here it is presented that TFQ can correctly identify the binding face for two control sequences, A15 and U6, using the E. coli, S. aureus and L. monocytogenes Hfq homologues. Using fluorescence anisotropy and crystallography it is observed that Trp mutants necessary for TFQ may affect binding to some degree but do not affect the overall structure or RNA binding function of Hfq. TFQ is then used to examine the distal face binding motifs for both Gram-negative (E. coli) and Gram-positive (S. aureus/L. monocytogenes) Hfq, (A-R-N)n and (R-L)n respectively. Using sequences that either fulfilled just (A-R-N)n or both (A-R-N)n and (A-A-N)n motifs it is shown that the distal face motif for Gram-negative Hfq is the more specific (A-A-N)n motif. Using sequences that either fulfilled just (R-L)n or both (R-L)n and (A-L)n motifs it is shown that the Gram-positive distal face motif can be redefined to the (A-L)n motif. Finally TFQ is used to explore autoregulation of E. coli hfq. Two identified binding sites located in the 5'UTR of hfq mRNA, site A and site B, were used for TFQ, along with a longer RNA sequence that contains both sites and their native linker, 5' UTR. TFQ illustrates that the individual sites and the 5' UTR are capable of binding both faces. Each site appears to prefer binding to one face over the other, suggesting a model for hfq 5' UTR mRNA binding to Hfq where either one or two hfq mRNA bind a single Hfq hexamer. In conclusion, TFQ is a straightforward method for analyzing how RNA sequences interact with Hfq that can be utilized to study how longer, physiologically relevant RNA sequences bind Hfq.</p> / Dissertation

Nucleases are integral to all DNA processing pathways. The exact nature of substrate recognition and enzymatic specificity in structure-specific nucleases that are involved in DNA replication, repair and recombination has been under intensive debate. The nucleases that rely on the contours of their substrates, such as 5’ nucleases, hold a distinctive place in this debate. How this seemingly blind recognition takes place with immense discrimination is a thought-provoking question. Pertinent to this question is the observation that even minor variations in the substrate provoke extreme catalytic variance. Increasing structural evidence from 5’ nucleases and other structure-specific nuclease families suggest a common theme of substrate recognition involving distortion of the substrate to orient it for catalysis and protein ordering to assemble active sites. Using three single-molecule (sm)FRET approaches of temporal resolution from milliseconds to sub-milliseconds, along with various supporting techniques, I decoded a highly sophisticated mechanism that show how DNA bending and protein ordering control the catalytic selectivity in the prototypic system human Flap Endonuclease 1 (FEN1). Our results are consistent with a mutual induced-fit mechanism, with the protein bending the DNA and the DNA inducing a protein-conformational change, as opposed to functional or conformational selection mechanism. Furthermore, we show that FEN1 incision on the cognate substrate occurs with high efficiency and without missed opportunity. However, when FEN1 encounters substrates that vary in their physical attributes to the cognate substrate, cleavage happens after multiple trials During the course of my work on FEN1, I found a novel photophysical phenomena of protein-induced fluorescence quenching (PIFQ) of cyanine dyes, which is the opposite phenomenon of the well-known protein-induced fluorescence enhancement (PIFE). Our observation and characterization of PIFQ led us to further investigate the general mechanism of fluorescence modulation and how the initial fluorescence state of the DNA-dye complex plays a fundamental role in setting up the stage for the subsequent modulation by protein binding. Within this paradigm, we propose that enhancement and quenching of fluorescence upon protein binding are simply two different faces of the same process. Our observations and correlations eliminate the current inconvenient arbitrary nature of fluorescence modulation experimental design.

<p> A noninvasive method using fluorescence quenching (FQ) to determine the conditional stability constants (logK') for aluminum with naturally occurring organic ligands has been developed. The method utilizes the Stern-Volmer equation to interpret data from ligand fluorescence suppression by aluminum. The total ligand concentration can also be determined using the measured stability constant and the Ryan-Weber equation. The method has been validated with the model ligand salicylic acid; logK' was found to be 3.5 ± 0.01 vs. 4.0 from the literature. The method was applied to the reference ligand Armadale fulvic acid and chemically realistic values were obtained. In addition, the expected trend of increasing stability constant with decreasing pH was observed. The method was further validated by determining the stability constant for Armadale fulvic acid using an independent technique, PCV colourimetry; the results agreed very well logK' = 4.7 vs. 4.65 for FQ analysis. Application of the method to whole filtered beaver pond water showed an increasing trend in the stability constant as the dissolved organic carbon (DOC) decreased. The Log of the stability constants were 3.15 ± 0.03, 3.26 ± 0.03, and 3.63 ± 0.02 for DOC concentrations 23, 14, and 10 ppm respectively. The method was also applied to size fractionated waters form lake Skjervatjern in Norway and the expected trend of increasing stability constant with increasing molecular weight was observed.</p> / Thesis / Bachelor of Science (BSc)

No description available.

Metallic nanoparticles (NPs) are exploited for their ability to interact with organic compounds and to increase significantly the fluorescence intensity and the photostability of many fluorescent dye molecules. Metal enhanced fluorescence (MEF) is therefore widely investigated for biosensing applications. When used in immunoassays, silver island films (SIFs) could augment the fluorescence intensity of fluorescein by a factor of seventeen; SIFs were also able to double or triple the emission intensity of cyanine dyes which are commonly used in (deoxyribonucleic acid) DNA microarrays. The emission intensity of indocyanine green — widely used as a contrast agent in medical imaging — was about twenty times higher in the proximity of SIFs. This enhancement phenomenon — due to the surface plasmon polaritons associated with the metallic NPs — can be explained by energy transfer from the metal NPs to the fluorescent dye molecules or by a modified local electromagnetic field experienced by the fluorophores in the vicinity of metal surfaces. Our research focused on the optical characterization of colloidal gold-silver alloy NPs containing different ratios of gold and silver (Au_1.00-Ag_0.00, Au_0.75-Ag_0.25, Au_0.50-Ag_0.50, and Au_0.25-Ag_0.75), as well as their interaction with three fluorophores: rose bengal, rhodamine B, and fluorescein sodium. Depending upon the dye quantum yield and its concentration in solution, enhancement or quenching of fluorescence was obtained. Thus, a three to five times increase in fluorescence intensity was observed in a 2.0 mM solution of rose bengal with all nanoalloys, a slight enhancement of fluorescence (1.2 – 1.6 times) was noticed in a 0.13 mM solution of rhodamine B with all four types of NPs, and fluorescence quenching occurred in all the fluorescein-NP solutions regardless of the dye concentration. / Master of Science

Notre génome, véritable mode d'emploi de chaque cellule et organisme, est constamment menacé par de multiples agents endogènes ou exogènes qui endommagent la biomolécule d'ADN. Ces lésions résultantes, de nature diverse, sont notamment impliquées dans les processus de vieillissement cellulaire, de cancérogénèse et de mort cellulaire. Afin de contrer ces effets néfastes, les organismes ont développé différents systèmes de réparation de l'ADN capables de prendre en charge spécifiquement chaque type de dommages. Parmi ces voies métaboliques, la réparation par excision de base (BER) répare chaque jour des dizaines de milliers de dommages, incluant les bases alkylées, oxydées ou désaminées, les sites abasiques ou encore certaines cassures de brin. Dans le présent travail, nous exposons la mise au point d'un nouveau biocapteur pour la détection des activités enzymatiques du BER. L'outil se caractérise par un set de sondes nucléiques autocomplémentaires, fluorescentes ou pro-fluorescentes, immobilisées sur microbilles paramagnétiques. Chaque sonde est modifiée par l'introduction sélective d'une lésion, substrat d'une activité enzymatique ciblée (ADN N-glycosylase, AP-endonucléase). L'activité d'excision/incision de la lésion, conduit à la coupure de la sonde et à la déshybridation de la structure. L'analyse et la quantification du clivage spécifique est réalisée en fluorescence, soit à partir du surnageant par spectrofluorimétrie, soit des billes par cytométrie en flux. Ce dispositif permet la détection multiplexée des activités enzymatiques de protéines purifiées ou au sein d'extraits nucléaires. Egalement, des applications dans le criblage d'inhibiteurs de la réparation de l'ADN sont envisageables dans le cadre de recherches pré-cliniques. L'adaptation de ces tests in vitro à la détection de la réparation de l'ADN in cellulo a fait l'objet de développements préliminaires. / Our genome, which may be considered as the program of each cell and organism, is constantly threatened by multiple endogenous and exogenous agents that damage the DNA biomolecule. These lesions, that show a wide array of structures, are particularly involved in cell aging, carcinogenesis and cell death. To thwart these negative effects, organisms have developed various DNA repair pathways that take in charge the alterations in a specific manner. Among them, the base excision repair (BER) removes every day dozens of thousands of damages, including alkylated, oxidized or deaminated bases, abasic sites or single strand breaks. In this study, we present the development of a new biosensor for the detection of BER enzymatic activities. The tool is characterized by a set of (pro)fluorescent hairpin-shaped DNA probes, immobilized on paramagnetic beads. Each probe is modified by the selective insertion of a lesion, substrate for the targeted repair enzyme (DNA glycosylase, AP-endonuclease). The excision/incision activity of the lesion leads to the cleavage of the probe together with the dehybridization of the structure. The analysis and quantification of the repair process is carried out by direct fluorescence measurements from the supernatant, or by analysis of the functionalized beads by flow cytometry. This device allows the multiplexed enzymatic activities detection of purified proteins or within nuclear extracts. Applications to the screening of DNA repair inhibitors have been successfully initiated. Finally, the adaptation of these in vitro tests to in cellulo detection of DNA repair activities was investigated in preliminary studies.