No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

High surface area gold electrodes are very good substrates for biosensors, catalysis and drug delivery. Their performance is characterized by good sensitivity, low detection limit and high signal. As a result, extensive research is being carried out in this field using different approaches of fabrication to generate high surface area porous electrodes of different morphology, pore size and structure. The morphology of the electrodes can be changed based on whether the approach involves a template or not, types of metal deposition, method and time of dealloying etc. The deposition of metal can be carried out using various approaches such as electroless deposition, electrochemical deposition, combination of electroless and electrochemical deposition, pulsed laser deposition, laser deposition etc. These electrodes can then be used in electrochemical measurements and their performance compared with an unmodified flat gold electrode. We used a template based approach, combined with electrochemical deposition, to fabricate macroporous, macro-nanoporous and nanoporous gold electrodes. To generate nanopores, in case of macro-nanoporous and nanoporous gold electrodes, we used gold-silver alloy electrochemical deposition method, followed by chemical dealloying. The morphology of electrodes was later observed under HITACHI Scanning Electron Microscope (SEM) and their elemental composition studied using HITACHI Energy Dispersion Spectroscopy (EDS). The electrodes were used in electrochemical measurements and their voltammetric data was compared. These measurements involved the determination of surface area, faradaic current using redox molecules with fast and slow electron transfer and charging current in KCl. Surface adsorption of dopamine was studied and detection of dopamine in the presence of ascorbic acid was carried out.

O processo de adsorção vem sendo utilizado como uma técnica eficaz para a remoção de íons metálicos em efluentes. Neste trabalho são apresentados os estudos para avaliar da capacidade de adsorção de cobalto em caulinita, um adsorvente de baixo custo, visando à remoção deste íon de soluções aquosas. Foi analisada a área superficial específica (S) em 25 amostras de materiais preparadas de diferentes modos: caulinita, bentonita e carvão ativado e, misturas de caulinita-bentonita e caulinita-carvão ativado. Estas misturas foram preparadas pela adição de 10, 20, 30, 40 e 50% de carvão ativado ou bentonita à caulinita. As amostras de caulinita-carvão ativado e caulinita in natura foram calcinadas a 600 e 1000 °C por 4 horas. Foi escolhida para os testes de adsorção a mistura de caulinita com 10% de carvão ativado por apresentar a melhor relação custo benefício em relação à S. Os parâmetros de adsorção investigados nesta mistura foram: tempo de contato, pH, concentração inicial de soluto, competição iônica e força iônica. Verificou-se que o tempo de contato e o pH otimizados para o propósito do trabalho foram 30 min e pH 6. Nestas condições a eficiência de remoção do íon cobalto da solução foi superior a 80%. Verificou-se que a presença de íons Cr e Zn, bem como o aumento da força iônica diminuem a capacidade de adsorção do Co na mistura adsorvente. As isotermas de Langmuir e Freundlich apresentaram R2 iguais a 0,906 e 0,597, respectivamente. Os parâmetros determinados nestas isotermas indicaram um processo espontâneo, ou seja, energeticamente favorável, para a adsorção do Co nas condições e que foram realizadas este trabalho. / The adsorption process has been used as an efficient technique for the removal of metallic ions in industrial effluent. In this work, it is presented the studies to evaluate the adsorption capacity of cobalt in kaolinite, a low cost adsorbent, aiming at the removal of this ion from aqueous solutions. The specific surface area (S) was analyzed in 25 samples prepared in different ways: kaolinite, bentonite and activated carbon and, mixtures of kaolinite-bentonite and kaolinite-activated carbon. These mixtures were prepared by adding to kaolinite 10, 20, 30, 40 or 50% of activated charcoal or bentonite. Samples of kaolinite-activated charcoal mixture and raw kaolinite were also calcined at 600 and 1000 °C for 4 hours. The adsorption parameters investigated for these adsorbents were: contact time, pH, solute initial concentration, ionic competition and ionic strength. It was found that the optimized contact time and pH, for the purpose of this work, were 30 min and pH 6. Under these conditions the cobalt ion removal efficiency was greater than 80%. It was verified that the presence of Cr and Zn ions, as well as the increase in ionic strength caused a decrease in the adsorption capacity of Co in the adsorbent mixture. The Langmuir and Freundlich isotherms presented R2 equal to 0.906 and 0.597, respectively. The parameters determined by these isotherms indicated a spontaneous process, i.e., energetically favorable, for the adsorption of Co under the conditions that this work was carried out.

Este trabalho investigou a técnica de solução coloidal(gelcasting) em meio polimérico para a obtenção de partículas de óxido de cério, visando seu emprego como catalisadores na combustão do metano. A formulação do sistema coloidal foi baseada na hidrólise de sais, como acetilacetonato de cério e nitrato de cério em presença de aditivos tais como polivinilbutiral (PVB), polivinilpirrolidona (PVP) e polivinilacetato (PVA), nas concentrações de 5, 10 e 15%, em meio alcoólico ou aquoso. Essas soluções, contendo os íons de interesse, foram submetidas a um tratamento térmico a 650°C, por 30 minutos, com taxa de aquecimento de 2°C/min. Após o tratamento térmico, os produtos obtidos foram caracterizados quanto a sua morfologia, área superficial, cristalinidade, perda de massa e atividade catalítica. As amostras obtidas a partir de acetilacetonato de cério mostraram-se mais reativas do que as obtidas a partir de nitrato de cério na catálise da combustão do metano, pois apresentaram maiores conversões e atingiram maiores temperaturas durante o processo, o que é de extrema importância uma vez que a combustão catalítica do metano é utilizada para a geração de energia térmica. Durante o processo de combustão, utilizando-se as partículas obtidas a partir de acetilacetonato de cério, observou-se a liberação de grandes quantidades de compostos nitrogenados quando comparado aos resultados dos ensaios com as partículas obtidas com nitrato de cério. Após a combustão do metano, as amostras sofreram significativa alteração na área superficial, provavelmente devido à intensidade do calor liberado, o que deu origem a maior aglomeração dos particulados. / This study investigatedto obtainparticles ofcerium oxide, for use as catalysts for thecombustion of methaneusing the techniqueofthroughpolymericcolloidal solution (gelcasting).Obtaining thecolloidal systemisbased onhydrolysis ofsalts such asceriumacetylacetonate,cerium nitratein the presence ofadditives such aspolyvinylbutyral(PVB),polyvinylpyrrolidone (PVP) and polyvinyl acetate(PVA),at concentrations of 5, 10 and 15% inaqueousoralcoholic medium. Thesesolutions containingionsof interestwere subjected to aheat treatment at 650°C for30 minutes, with heating rate of2°C/min.After heat treatment, the fibers were characterized accordingto their morphology, surface area, crystallinity, weight loss andcatalytic activity. Samplesobtained fromceriumacetylacetonatewere morereactivethan theceriumnitrateto thecombustion of methane, as showed greaterconversions andhigher temperaturesreachedduring the process, which is of utmost importancesince thecombustioncatalyticmethaneis usedfor generatingthermal energy.Duringthe combustion processusing theobtained fromparticlesof ceriumacetylacetonate, there was the release of largequantities ofnitrogencomparedto the results ofassays withthe particles obtainedwithcerium nitrate.Afterthe reactionwith methane, the samples underwentsignificantchange insurface area, probably dueto the intensity of heat of this reaction, which helps to agglomerate the particles.

It is essential to characterize and quantify naturally occurring morphometric changes in the human brain when investigating the onset or progression of neurodegenerative disorders. The aim of this thesis is to characterize the properties and measure the performance of several popular automated magnetic resonance image analysis tools dedicated to brain morphometry. The thesis begins with an overview of morphometric analysis methods, followed by a literature review focusing on cortical parcellation protocols. Our work identified unanimous protocol weaknesses across all packages in particular issues when addressing cortical variability. The next chapters present a ground truth dataset and a dedicated software to analyse manually parcellated data. The dataset (https://datashare.is.ed.ac.uk/handle/10283/2936) includes 10 healthy middle-aged subjects, whose metrics we used as reference against automated tools. To develop the ground truth dataset, we also present a manual parcellation protocol (https://datashare.is.ed.ac.uk/handle/10283/3148) providing step-by-step instructions for outlining three cortical gyri known to vary with ageing and dementia: the superior frontal gyrus, the cingulate gyrus and the supramarginal gyrus. The software, Masks2Metrics (https://datashare.is.ed.ac.uk/handle/10283/3018), was built in Matlab to calculate cortical thickness, white matter surface area, and grey matter volume from 3D binary masks. Characterizing these metrics allowed further understanding of the assumptions made by software when creating and measuring anatomical parcels. Next, we present results from processing the raw T1-weighted volumes in the latest versions of several automated image analysis tools-FreeSurfer (versions 5.1 and 6.0), BrainGyrusMapping, and BrainSuite (version 13a)- against our ground truth. Tool repeatability for the same system was confirmed as multiple runs yielded identical results. Compared to our ground truth, the closest results were generated by BrainGyrusMapping for volume metrics and by FreeSurfer 6.0 for thickness and surface area metrics. In conclusion, our work sheds light on the significance of clearly detailed parcellation protocols and accurate morphometric tools due to the implications that they both will have. We therefore recommend extra caution when selecting image analysis tools for a study, and the use of independent publicly available ground truth datasets and metrics tools to assist with the selection process.