The theses is focused on efficient use of numerical methods in development of low-voltage switching devices, namely to create a physically correct and reliable numerical model of the temperature field to find an application in the design of the current path of a device for various operating conditions. The creation of this numerical model requires not only correct inclusion of all modes of heat transfer - conduction, convection and radiation, but also correct solution of problematic transient resistance - both electrical and thermal in electrical contacts at different stages of usage. Therefore an essential part of the theses forms a thorough experimental analysis of the necessary material properties and dependencies which forms input data for the numerical model that is based on the finite volume method. The last part of the theses deals with debugging and verification of numerical model to correspond with experimentally obtained data. The result of the theses is the numerical model which is able to solve correctly both steady and various transient states of swiching devices.

The aim of this work is to describe news in Autodesk Inventor Professional 2008. In second part of the work there are described the possibilities of technical drawing in Autodesk Inventor. In third part there is mentioned basic information about ANSYS Workbench. There is thermal simulation of asynchronous motor too.

This master´s thesis deals with ventilation of synchronous generators with a cylindrical rotor. For the design of ventilation we apply basic physical laws in the field of hydromechanics and thermomechanics. Therefore the first chapters are devoted to these subjects. They are followed by the description of ventilation systems and a thermal net is created and solved for one of them consisting of the thermal resistance and sources. The final part deals with a program, which I developed in Visual Basic 2008 Express Edition. This program enables to calculate the ventilation and heating of individual parts of the machine after entering basic machine dimensions and losses.

Práce se zabývá konstrukcí a využitím tepelných sítí k simulaci oteplení elektrických motorů velkých výkonú. Po úvodu do termiky a teorie proudění je popsána konstrukce tří různých typů sítí pro odlišné ventilační schémata motoru. Dále jsou popsány optimalizační metody a jejich možnosti k tepelné optimalizaci motorů. Je vybrána a vysvělena Marquard-Levenbergova metoda a na konkrétním případě je vysvětleno její použití a výhody pro optimalizaci chlazení elektrického motoru. V závěru se práce zabývá také citlivostí teplotních sití na jednotlivé vstupní parametry, porovnáním simulací s měřenými výsledky a také vlivem teplotních závislosti jenotlivých prvků sítě.

This master's thesis deals with the temperature-rise of selected parts of the low-voltage switchgear. The theoretical part describes the physical principles and the basic mechanisms of heat transfer. The next part describes the possible effect of elevated temperature on the device inside the switchgear. The master's thesis is awarded by ABB Ltd., so another part is dedicated to MNS switchgear. The following part describes the permitted limit of temperature-rise of switchgear in accordance with IEC 61439-1. In the practical part is a calculation temperature-rise of selected part of switchgear based on IEC 60890. Model in SOLIDWORKS Flow Simulation was created for the same part of the switchgear and thermal analysis was performed. The values of allowable temperature rise of individual parts are compared with the results obtained by calculations and simulations. In the last part is verified the possibility of calculating the temperature-rise in the EPLAN software.

The private sector has an increasingly important role in limiting the temperature rise to below the crucial 1.5°C of the Paris Agreement. In order to assess how well a portfolio is aligned to the goals of the Paris Agreement, benchmarks need be used. The creation of benchmarks is complex and varying methodologies with associated opinions exist. The purpose of this thesis is to examine two different approaches for creating benchmarks; Single scenario and Warming function. The usability of the benchmarks is examined from the perspective of a financial institution. The methodology is based on a literature review of earlier research. Using empirical data the different methods are tested in a smaller Case study and on a larger data set. The results give insights in different advantages and disadvantages of the methods. Using a Single scenario approach allows for a more granular analysis, however it is criticized for being misleading as the result is easily manipulated. The Warming function is less granular, as almost all companies in the empirical data are assessed against the same benchmark - creating unfair results for companies active in sectors with different demands on emission reduction. In order to gain sectoral granularity the Warming function methodology need to be investigated further. By lowering the demands on the final benchmarks, the adaptation to different sectors can increase inthe Warming function approach. / Den privata sektorn har en växande roll i kampen för att begränsa den globala uppvärmningen till Parisavtalets kritiska gräns på 1,5°C. För att utvärdera hur väl ett företag presterar klimatmässigt jämfört med kraven i Parisavtalet behövs jämförelsemått. Skapandet av jämförelsemått är komplext och en mängd olika metodologier existerar med olika grader av popularitet. Syftet med denna uppsats är att undersöka två olika tillvägagångssätt för att skapa jämförelsemått; Single scenario och Warming function. Användarbarheten av metodologierna utvärderas från perspektivet av en finansiell institution. Metodologin baseras på en litteraturstudie av tidigare undersökningar. Warming function och Single scenario utvärderas i en mindre fallstudie och i tester på ett större data set med hjälp av empiriska data. Resultatet ger insikter i olika för- och nackdelar med metoderna. Att använda Single scenario tillåter en mer granulär analys, dock kritiseras denna metod för att vara missledande då de slutgiltiga resultaten är enkla att manipulera. Warming functio när mindre granulär då de flesta företagen utvärderas mot samma jämförelsemått vilket skapar orättvisa resultat för företag som är aktiva i sektorer med olika höga krav på utsläppsminskning. För att öka granulariteten måste metodologin för Warming function undersökas djupare. Genom att sänka kraven på de slutgiltiga jämförelsemåtten kan sektoranpassade jämförelsemått öka i Warming function.

O objetivo deste estudo foi avaliar os efeitos da irradiação do canal radicular pelo laser de diodo, quando associado à terapêutica endodôntica tradicional: no aumento da temperatura na superfície radicular externa; nas alterações morfológicas da dentina do canal radicular; no selamento marginal apical após obturação do canal radicular e no potencial de redução microbiana. O aumento de temperatura foi monitorado durante a irradiação do canal radicular de incisivos inferiores por câmera termográfica. Os parâmetros de irradiação foram: grupo de emissão contínua (CW): P=2,5 W e grupo de emissão pulsada ?P=1,25 W. A avaliação das alterações morfológicas por MEV das amostras irradiadas nas condições acima citadas foram comparadas com amostras não irradiadas. O grau de infiltração marginal apical foi mensurado em amostras irradiadas (CW; P = 2,5 W) ou não irradiadas, e obturadas por um dos três cimentos endodônticos: N-Rickert, AH Plus ou Apexit. O grau de penetração linear foi medido após o período de imersão das amostras na solução de azul de metileno. O potencial de redução microbiana promovido pela associação do laser à terapêutica endodôntica tradicional foi avaliado em dentes portadores de infecção endodôntica primária por técnicas de cultura e PCR. A irrigação de NaOCl 0,5 % e uso de hidróxido de cálcio (grupo controle) foram associados à irradiação no grupo laser (CW; P=2,5 W). Foram avaliadas: a redução do número de UFC dos anaeróbios viáveis, a quantidade de E. faecalis e de lactobacilos/amostra, e a proporção de E. faecalis e de lactobacilos/microrganismos viáveis. O aumento de temperatura na superfície radicular externa durante a irradiação do canal radicular nos regimes de emissão contínuo e pulsado não excedeu o limite crítico de 10 ºC. A variação de 10 temperatura mediana máxima na região apical usando o método de Wilcoxon (p < 0,05) foi de 8,6 °C na irradiação contínua e de 3,3 °C na emissão pulsada. O tempo de resfriamento de 20 segundos foi determinado entre os 5 ciclos de irradiação. As alterações morfológicas promovidas pela irradiação do canal revelaram fusão da dentina e obliteração dos túbulos dentinários especialmente no terço apical, em ambas as condições de irradiação. A irradiação do canal radicular pelo laser de diodo reduziu significativamente o grau de infiltração marginal apical nos canais obturados pelo cimento Apexit (Kruskal Wallis p < 0,05). A prevalência dos anaeróbios viáveis ao final do tratamento foi menor no grupo laser do que no grupo controle, embora não tivesse sido constatada diferença significante entre os grupos (Mann-Whitney p > 0,05). O porcentual de lactobacilos/microrganismos viáveis no início do tratamento foi 22 % reduzindo a zero ao final, no grupo controle. Esse microrganismo não foi detectado no grupo laser. A proporção de Enterococcus/microrganismos viáveis variou de 36 %-50 % no grupo controle, e 22 %-0 % no grupo laser, no início e final do tratamento, respectivamente. Nas condições testadas, os resultados sugerem que o laser de diodo mostrouse uma ferramenta possível de ser incorporada à Endodontia, contudo os efeitos biológicos são similares à terapêutica endodôntica tradicional bem executada. / The aim of this study was to evaluate the effects of diode laser irradiation associated with endodontic therapy. The aspects analyzed were: temperature rise at the external root surface, morphological changes at the dentine root walls, apical marginal leakage after root sealing, and microbiological reduction after laser irradiation. The temperature rise in inferior incisor teeth was monitored using a thermographic camera. Two laser treatment parameters were investigated: continuous emission mode (CW) with P = 2.5 W and pulsed emission mode (PL) with average power?P = 1.25 W. The morphological changes of irradiated samples were analyzed by SEM for both treatment modes and compared with a non-irradiated control group. The apical marginal leakage was measured after the immersion in methylene blue solution for irradiated (CW; P = 2.5 W) and non-irradiated samples sealed by one of the following endodontic sealers: N-Rickert, AH Plus or Apexit. The reduction in microbiological activity after conventional endodontic therapy and after laser irradiation was evaluated in primary endodontic infection using culture and PCR techniques, where the control group used conventional 0.5 % NaOCl solution and calcium hydroxide treatment was compared with laser irradiation (CW; P = 2.5 W). The reduction of viable anaerobic microorganisms, the quantity of E. faecalis and Lactobacillus per samples, and the rate of E. faecalis and Lactobacillus per viable microorganism were analyzed. The temperature rise at external root surface during root canal irradiation in both continuous and pulsed emission modes was demonstrated not exceed the safety limit of 10 ºC. The maximum median temperature variation was 8.6 °C (CW) at the continuous emission mode and 1.6 °C at pulsed mode (PL) (Wilcoxon, p < 0.05). The optimal ?resting time? between each of five irradiation cycles was 12 determined to be 20 seconds to allow for tissue cooling and hence to prevent potential dangerous rises in the tissue temperature. SEM analysis revealed melting of dentine and closure of dentinal tubules especially at apical third for both irradiation conditions. The apical marginal leakage was significant reduced in the irradiated samples sealed with Apexit (Kruskal Wallis, p < 0.05). The prevalence of the viable anaerobic microorganisms exhibited reduced with time in both the control and laser groups with no statistical difference (Mann-Whitney p > 0.05). The Lactobacillus rate per viable microorganisms in the control group was 22 % at the beginning of the treatment and decreasing to zero at the end. This microorganism was not detected in laser group. The rate of Enterococcus per viable microorganism ranged 36 % to 50 % in the control group and 22 % to 0 % in laser group at the begin and the end of treatments, respectively. The conclusion is that diode laser technology is suitable for applications in endodontic therapy under the conditions tested in this study, however, the biological effects are similar to well done conventional endodontic therapy.

Dans le contexte de la montée des préoccupations écologiques, le développement de véhicules de transports routiers s’oriente vers le développement de véhicules moins polluants à entraînement électrique comme les Véhicules Électriques Hybrides (VEHs) et les Véhicules tout Électriques (VEs). Avec l’augmentation des puissances requises et la réduction de l’espace disponible, la gestion thermique devient une préoccupation de plus en plus importante lors du développement des composants embarqués comme les moteurs/générateurs électriques, onduleurs, batteries et faisceaux électriques. Parmi eux, le faisceau électrique de puissance qui est typiquement composé de câbles électriques, de connecteurs et de boîtes de distribution de puissance ne peut être conçu de manière appropriée qu’à la suite d’une analyse thermique, électrique, chimique et mécanique approfondie.Cette thèse est écrite pour contribuer à l’optimisation de la conception électrothermique de faisceaux de câbles par des simulations afin de réduire la quantité de tests expérimentaux nécessaires pour leur développement. Des modèles théoriques pour la prédiction du comportement électrique et thermique de câbles électriques et des faisceaux de câbles sont passés en revue et adaptés aux exigences automobiles. La validation est accomplie en comparant les résultats de simulation avec ceux d’analyses élément finie (FEA) et de données de mesure. Une partie majeure de cette thèse aborde la simulation thermique de câbles électriques de longueur infinie suspendus dans l’air, prenant en compte les dépendances en température des résistances de conducteurs et la non-linéarité du coefficient de transfert thermique total à la surface du câble. L’influence des courants de blindage et de courants arbitraires dans les conducteurs sur la montée en température des câbles électriques est considérée dans des circuits thermiques équivalents et illustré par des exemples pratiques. / In the context of growing ecological concerns, the development of road transport vehicles moves itself toward the development of less polluting vehicles with electric drives such as Hybrid Electric Vehicles (HEVs) and full Electric Vehicles (EVs). With rising power requirements and reducing available space, thermal management is becoming an increasingly important concern during development of on-board vehicle components such as electric motor(s)/generator(s), power inverter(s), battery pack(s) and cable harnesses. Among them, the cable harness which is typically composed of electrical cables, connectors and power distribution boxes can only be designed properly after a detailed thermal, electrical, chemical and mechanical analysis.This thesis is written to contribute to the optimization of the electro-thermal design of cable harnesses through simulations and reduce the amount of experimental testing needed during their development. Theoretical models for the prediction of the electrical and thermal behavior of electric cables and cable harnesses are reviewed and adapted for automotive requirements. Validation is accomplished by comparing simulation results with Finite Element Analysis (FEA) and measurement data. A major part of this thesis addresses the thermal simulation of electrical cables of infinite length installed in air, taking into account the temperature dependencies of conductor resistances and non-linearity of the total heat transfer coefficient at the cable surface. The influence of shielding currents and arbitrary current loads in the conductors on the temperature rises within electric cables is also considered using thermal ladder networks and illustrated by practical examples. Because shielding currents in vehicles are not only caused by induced currents but also by functional electrical currents generated by low-voltage power sources, new theoretical studies and experimental observations for the estimation of these currents as a function of the vehicle electrical architecture and circuit characteristics are presented. A primary finding reveals that keeping the resistance of grounding connections low compared to that of the shielding connections is an appropriate but expensive means for limiting the transfer of functional currents in the shielding circuits. Finally, a complete and modular model for the prediction of transient temperatures along the length of cable harness sections is developed and validated based on the outcomes of all previous findings.

O objetivo deste estudo foi avaliar os efeitos da irradiação do canal radicular pelo laser de diodo, quando associado à terapêutica endodôntica tradicional: no aumento da temperatura na superfície radicular externa; nas alterações morfológicas da dentina do canal radicular; no selamento marginal apical após obturação do canal radicular e no potencial de redução microbiana. O aumento de temperatura foi monitorado durante a irradiação do canal radicular de incisivos inferiores por câmera termográfica. Os parâmetros de irradiação foram: grupo de emissão contínua (CW): P=2,5 W e grupo de emissão pulsada ?P=1,25 W. A avaliação das alterações morfológicas por MEV das amostras irradiadas nas condições acima citadas foram comparadas com amostras não irradiadas. O grau de infiltração marginal apical foi mensurado em amostras irradiadas (CW; P = 2,5 W) ou não irradiadas, e obturadas por um dos três cimentos endodônticos: N-Rickert, AH Plus ou Apexit. O grau de penetração linear foi medido após o período de imersão das amostras na solução de azul de metileno. O potencial de redução microbiana promovido pela associação do laser à terapêutica endodôntica tradicional foi avaliado em dentes portadores de infecção endodôntica primária por técnicas de cultura e PCR. A irrigação de NaOCl 0,5 % e uso de hidróxido de cálcio (grupo controle) foram associados à irradiação no grupo laser (CW; P=2,5 W). Foram avaliadas: a redução do número de UFC dos anaeróbios viáveis, a quantidade de E. faecalis e de lactobacilos/amostra, e a proporção de E. faecalis e de lactobacilos/microrganismos viáveis. O aumento de temperatura na superfície radicular externa durante a irradiação do canal radicular nos regimes de emissão contínuo e pulsado não excedeu o limite crítico de 10 ºC. A variação de 10 temperatura mediana máxima na região apical usando o método de Wilcoxon (p < 0,05) foi de 8,6 °C na irradiação contínua e de 3,3 °C na emissão pulsada. O tempo de resfriamento de 20 segundos foi determinado entre os 5 ciclos de irradiação. As alterações morfológicas promovidas pela irradiação do canal revelaram fusão da dentina e obliteração dos túbulos dentinários especialmente no terço apical, em ambas as condições de irradiação. A irradiação do canal radicular pelo laser de diodo reduziu significativamente o grau de infiltração marginal apical nos canais obturados pelo cimento Apexit (Kruskal Wallis p < 0,05). A prevalência dos anaeróbios viáveis ao final do tratamento foi menor no grupo laser do que no grupo controle, embora não tivesse sido constatada diferença significante entre os grupos (Mann-Whitney p > 0,05). O porcentual de lactobacilos/microrganismos viáveis no início do tratamento foi 22 % reduzindo a zero ao final, no grupo controle. Esse microrganismo não foi detectado no grupo laser. A proporção de Enterococcus/microrganismos viáveis variou de 36 %-50 % no grupo controle, e 22 %-0 % no grupo laser, no início e final do tratamento, respectivamente. Nas condições testadas, os resultados sugerem que o laser de diodo mostrouse uma ferramenta possível de ser incorporada à Endodontia, contudo os efeitos biológicos são similares à terapêutica endodôntica tradicional bem executada. / The aim of this study was to evaluate the effects of diode laser irradiation associated with endodontic therapy. The aspects analyzed were: temperature rise at the external root surface, morphological changes at the dentine root walls, apical marginal leakage after root sealing, and microbiological reduction after laser irradiation. The temperature rise in inferior incisor teeth was monitored using a thermographic camera. Two laser treatment parameters were investigated: continuous emission mode (CW) with P = 2.5 W and pulsed emission mode (PL) with average power?P = 1.25 W. The morphological changes of irradiated samples were analyzed by SEM for both treatment modes and compared with a non-irradiated control group. The apical marginal leakage was measured after the immersion in methylene blue solution for irradiated (CW; P = 2.5 W) and non-irradiated samples sealed by one of the following endodontic sealers: N-Rickert, AH Plus or Apexit. The reduction in microbiological activity after conventional endodontic therapy and after laser irradiation was evaluated in primary endodontic infection using culture and PCR techniques, where the control group used conventional 0.5 % NaOCl solution and calcium hydroxide treatment was compared with laser irradiation (CW; P = 2.5 W). The reduction of viable anaerobic microorganisms, the quantity of E. faecalis and Lactobacillus per samples, and the rate of E. faecalis and Lactobacillus per viable microorganism were analyzed. The temperature rise at external root surface during root canal irradiation in both continuous and pulsed emission modes was demonstrated not exceed the safety limit of 10 ºC. The maximum median temperature variation was 8.6 °C (CW) at the continuous emission mode and 1.6 °C at pulsed mode (PL) (Wilcoxon, p < 0.05). The optimal ?resting time? between each of five irradiation cycles was 12 determined to be 20 seconds to allow for tissue cooling and hence to prevent potential dangerous rises in the tissue temperature. SEM analysis revealed melting of dentine and closure of dentinal tubules especially at apical third for both irradiation conditions. The apical marginal leakage was significant reduced in the irradiated samples sealed with Apexit (Kruskal Wallis, p < 0.05). The prevalence of the viable anaerobic microorganisms exhibited reduced with time in both the control and laser groups with no statistical difference (Mann-Whitney p > 0.05). The Lactobacillus rate per viable microorganisms in the control group was 22 % at the beginning of the treatment and decreasing to zero at the end. This microorganism was not detected in laser group. The rate of Enterococcus per viable microorganism ranged 36 % to 50 % in the control group and 22 % to 0 % in laser group at the begin and the end of treatments, respectively. The conclusion is that diode laser technology is suitable for applications in endodontic therapy under the conditions tested in this study, however, the biological effects are similar to well done conventional endodontic therapy.

The progress in ultrasound techniques goes hand in hand with increasing of diagnostic machine acoustic outputs. Ultrasound biological effects can adversely influence the development of human fetus. Recent studies of thermal effect on biological tissues are usually based on simulation of simple ultrasound transducers. The aim of this work is to build a flexible model of diagnostic system to simulate temperature increase during fetal development. Different types of ultrasound probes were used for generation of acoustic field with simulated piezoelectric element properties. Optimized linear and phased arrays were modeled with dynamic beam steering and focus. Computer simulations were concentrated on extreme conditions in obstetric ultrasonography and 3D tissue model was compared with real ultrasound probes measurements. To detect temperature increase, the bone tissue phantom was used. Results point out potential risks for fetus with diagnostic ultrasound probes. Based on the results of this work, practical recommendations increasing safety of obstetric examinations were drawn.