Spelling suggestions: "subject:"tender"" "subject:"tenderar""
1 |
A decision support system for the selection of the optimum contractorMoustafa, Ibrahim Mahmoud Mahdi January 2001 (has links)
No description available.
|
2 |
Analýza hospodárnosti výběrových řízení u zakázek malého rozsahu podle pravidel OP VKKubičková, Hana January 2011 (has links)
No description available.
|
3 |
Forschungsnachrichten10 December 2016 (has links) (PDF)
No description available.
|
4 |
Forschungsnachrichten19 December 2016 (has links) (PDF)
No description available.
|
5 |
Způsoby zadávání veřejných zakázek / Modes of public tendersVrbová, Hana January 2015 (has links)
The aim of this Master's thesis is to define the particular modes of public tenders in the Czech republic. The awarding of the public tenders represents special mean of concluding the public contracts governed by the Act N. 137/2006 Coll. This thesis concentrates mainly on the description of the particular methods of awarding the public tenders, the conditions required for their use as well as on the procurement procedure itself. The awarding procedure is characterized in accordance with the European judicial decisions, Czech case law and also the decisions of the Office for Protection of Competition. In relation to the newly adopted European directives the thesis analyses also the changes that are brought by these directives to the subject matter.
|
6 |
Kvalifikační předpoklady a hodnotící kritéria v zadávacím řízení / Qualifying requirements and evaluating criteria in public tendersSwaczynová, Barbara January 2013 (has links)
Qualifying requirements and evaluating criteria in public tenders The purpose of my thesis is to analyse selected areas of public tenders awarding, namely qualifying requirements and evaluating criteria, which are used for selection of the most advantageous contractor for performance of the public tender object. The thesis is composed of four main chapters. Chapter One summarizes the development of public tender legislation in the Czech Republic, defines current legislation both in the Czech Republic and in the European Union. Chapter Two defines basic terms of the public tenders area which are typical and characteristic only for public tenders and which are not used in other fields of Czech law. The two remaining chapters are devoted to the qualifying requirements and evaluating criteria, their role and types. Through qualifying requirements contractors are divided into those who are qualified to perform public tender and those who are not. Regarding its importance, it is necessary to stick to the binding provision of the Public Procurement Act while setting the qualifying requirements. Chapter Four is devoted to the evaluating criteria. On the basis of the evaluating criteria the contractor whose bid best fulfils the idea of performance of the contracting authority is chosen from those who are...
|
7 |
The contextualization of decision-making processes in the Limpopo provincial government tender boardMakhura, Mochiphisi Piet January 2005 (has links)
Thesis (MPA.) --University of Limpopo, 2005 / Refer to document
|
8 |
The History of the Master Builders Association of NSW: The First Hundred YearsElder, John January 2007 (has links)
Doctor of Philosophy (PhD) / The study of employer associations in Australia has focused on the activities of state employers’ federations and peak employer organisations in the federal sphere and on the effect on those organisations of Australia’s compulsory conciliation and arbitration system. The majority of literature has continued to mainly focus on national employer associations and on their difficulties in achieving national unity due to the differing views of their State branches. Despite their historic relevance, state employer associations that were established during the colonial era have been virtually ignored. Whilst single industry associations at the state level have also had to come to terms with the demands of Australia’s dual industrial relations systems, the role of the state systems and of the state-based employer associations appear to have attracted comparatively little academic interest. The effect on employer associations of the character and status of those who direct and influence their operations has received little, if any, analysis. Leading builders who were the major contractors of their time established the Master Builders Association of NSW (MBA/NSW) during the colonial era, and those that led the association throughout the turmoil of the 1890s, a major depression and two world wars continued to be the leading builders in the State of New South Wales. Following the Second World War, the character of the MBA/NSW changed with the absorption of suburban associations that comprised small to medium-sized builders. That development was compounded by the changes in the size, height and complexity of buildings within the Central Business District of Sydney and in other centres throughout the metropolitan area. Enormous capital was required to fund construction works and large corporations were formed and the bench-mark of what constituted a major contractor was raised considerably. Those events had an enormous impact on the character and operations of the MBA/NSW. This historical thesis seeks to explain why the MBA/NSW was successfully established in 1873 after two previous attempts; and, what accounts for its subsequent survival and growth. It analyses the various challenges that faced the MBA/NSW during its first one hundred years and the effect on that association of the policies and practices of iii architects, governments, trade unions and other employer associations. It traces the 1890 establishment of the Master Builders Federation of Australia (MBFA), the oldest federal industry association in Australia, by the MBA/NSW and its sister associations from other areas of Australia and analyses the manner in which the State-based Master Builders Associations each fought to retain their individual independence and reject any attempts to cede their powers so as to convert their federation into a national centralised body. The need for quick national responses of major building companies during the 1970s was addressed through a composite organization created by the Master Builder movement and the Australian Federation of Construction Contractors due to the continued refusal of the Master Builders associations to cede their powers to MBFA. The development of the trade union movement in the building industry in New South Wales is also analysed together with reference to the history of building industry awards in this State. The study also outlines the history of MBA/NSW initiatives and policies related to tendering and industrial relations which came under increasing pressure due to legal challenges from disciplined members and to changes arising from industrial and trade practices legislation. The practice of convening tender meetings, the introduction of Builders Licensing in New South Wales and, the origins of the MBA/NSW Group Apprenticeship Scheme are each described.
|
9 |
Abnormally Lowest Bids In Public Construction WorksKaracan, Volkan Hulusi 01 February 2008 (has links) (PDF)
The purpose of this thesis is to determine the importance of abnormally low
tenders for Turkey, understand the problems created by abnormally low tenders,
find reasons of them, develop various methods in reducing abnormally low tender
problem and determine the most appropriate method. In this thesis, reasons of
abnormally low tenders in Europe and Turkey were investigated. Various
recommendations were developed for solving the problem and validity of these
solutions was investigated. Different results were obtained due to the different
social structure of countries. Besides, abnormally low tender evaluation
questionnaire was used to find reasons of abnormally low tenders in Turkey. This
questionnaire reached to 430 firms or people and by detailed analysis of
questionnaire, reasons of abnormally low tenders were found out and some
solution methods were proposed.
|
10 |
The History of the Master Builders Association of NSW: The First Hundred YearsElder, John January 2007 (has links)
Doctor of Philosophy (PhD) / The study of employer associations in Australia has focused on the activities of state employers’ federations and peak employer organisations in the federal sphere and on the effect on those organisations of Australia’s compulsory conciliation and arbitration system. The majority of literature has continued to mainly focus on national employer associations and on their difficulties in achieving national unity due to the differing views of their State branches. Despite their historic relevance, state employer associations that were established during the colonial era have been virtually ignored. Whilst single industry associations at the state level have also had to come to terms with the demands of Australia’s dual industrial relations systems, the role of the state systems and of the state-based employer associations appear to have attracted comparatively little academic interest. The effect on employer associations of the character and status of those who direct and influence their operations has received little, if any, analysis. Leading builders who were the major contractors of their time established the Master Builders Association of NSW (MBA/NSW) during the colonial era, and those that led the association throughout the turmoil of the 1890s, a major depression and two world wars continued to be the leading builders in the State of New South Wales. Following the Second World War, the character of the MBA/NSW changed with the absorption of suburban associations that comprised small to medium-sized builders. That development was compounded by the changes in the size, height and complexity of buildings within the Central Business District of Sydney and in other centres throughout the metropolitan area. Enormous capital was required to fund construction works and large corporations were formed and the bench-mark of what constituted a major contractor was raised considerably. Those events had an enormous impact on the character and operations of the MBA/NSW. This historical thesis seeks to explain why the MBA/NSW was successfully established in 1873 after two previous attempts; and, what accounts for its subsequent survival and growth. It analyses the various challenges that faced the MBA/NSW during its first one hundred years and the effect on that association of the policies and practices of iii architects, governments, trade unions and other employer associations. It traces the 1890 establishment of the Master Builders Federation of Australia (MBFA), the oldest federal industry association in Australia, by the MBA/NSW and its sister associations from other areas of Australia and analyses the manner in which the State-based Master Builders Associations each fought to retain their individual independence and reject any attempts to cede their powers so as to convert their federation into a national centralised body. The need for quick national responses of major building companies during the 1970s was addressed through a composite organization created by the Master Builder movement and the Australian Federation of Construction Contractors due to the continued refusal of the Master Builders associations to cede their powers to MBFA. The development of the trade union movement in the building industry in New South Wales is also analysed together with reference to the history of building industry awards in this State. The study also outlines the history of MBA/NSW initiatives and policies related to tendering and industrial relations which came under increasing pressure due to legal challenges from disciplined members and to changes arising from industrial and trade practices legislation. The practice of convening tender meetings, the introduction of Builders Licensing in New South Wales and, the origins of the MBA/NSW Group Apprenticeship Scheme are each described.
|
Page generated in 0.042 seconds