1 |
On low power test and DFT techniques for test set compactionRemersaro, Santiago 01 January 2008 (has links)
The objective of manufacturing test is to separate the faulty circuits from the good circuits after they have been manufactured. Three problems encompassed by this task will be mentioned here.
First, the reduction of the power consumed during test. The behavior of the circuit during test is modified due to scan insertion and other testing techniques. Due to this, the power consumed during test can be abnormally large, up to several times the power consumed during functional mode. This can result in a good circuit to fail the test or to be damaged due to heating.
Second, how to modify the design so that it is easily testable. Since not every possible digital circuit can be tested properly it is necessary to modify the design to alter its behavior during test. This modification should not alter the functional behavior of the circuit. An example of this is test point insertion, a technique aimed at reducing test time and decreasing the number of faulty circuits that pass the test.
Third, the creation of a test set for a given design that will both properly accomplish the task and require the least amount of time possible to be applied. The precision in separation of faulty circuits from good circuits depends on the application for which the circuit is intended and, if possible, must be maximized. The test application time is should be as low as possible to reduce test cost.
This dissertation contributes to the discipline of manufacturing test and will encompass advances in the afore mentioned areas. First, a method to reduce the power consumed during test is proposed. Second, in the design modification area, a new algorithm to compute test points is proposed. Third, in the test set creation area, a new algorithm to reduce test set application time is introduced. The three algorithms are scalable to current industrial design sizes. Experimental results for the three methods show their effectiveness.
|
2 |
Design for test methods to reduce test set sizeLiu, Yingdi 01 August 2018 (has links)
With rapid development in semiconductor technology, today's large and complex integrated circuits require a large amount of test data to achieve desired test coverage. Test cost, which is proportional to the size of the test set, can be reduced by generating a small number of highly effective test patterns. Automatic Test Pattern Generators (ATPGs) generate effective deterministic test patterns for different fault models and can achieve high test coverage. To reduce ATPG-produced test set size, design for test (DFT) methods can be used to further improve the ATPG process and apply generated test patterns in more efficient ways.
The first part of this dissertation introduces a test point insertion (TPI) technique that reduces the test pattern counts and test data volume of a design by adding additional hardware called control points. These dedicated control points are inserted at internal nodes of the design to resolve large internal conflicts during ATPG. Therefore, more faults can be detected by a single test pattern. To minimize silicon area needed to implement these control points, we propose a method that reuses some existing functional flip-flops as drivers of the control points, instead of inserting dedicated flip-flops for the control points. Experimental results on industrial designs indicate that the proposed technique can achieve significant test pattern reductions, similar to the control points using dedicated flip-flops.
The second part of this dissertation proposes a staggered ATPG scheme that produces deterministic test-per-clock-based staggered test patterns by using dedicated compactor scan chains to capture additional test responses during scan shift cycles that are used for regular scan cells to completely load each test pattern. These compactor scan chains are formed by dedicated capture-per-cycle observation test points inserted at suitable locations of the design. By leveraging this new scan infrastructure, more compacted test patterns can be generated, and more faults can also be systematically detected during the simulation process, thus reducing the overall test pattern count.
To meet the stringent test requirements for in-system test (especially for automotive test), a built-in self-test (BIST) approach, called Stellar BIST, is introduced in the last part of this dissertation. Stellar BIST employs a dedicated BIST infrastructure with additional on-system memory to store some parent test patterns (seeds). Derivative test patterns can be obtained by complementing selected bits of corresponding parent patterns through an on-chip Stellar BIST controller. A dedicated ATPG process is also proposed for generating a minimal set of test patterns that need to be stored and their effective derivative patterns that require short test application time. Furthermore, the proposed scheme can provide flexible trade-offs between stored test data volume and test application time.
|
3 |
Techniques for Seed Computation and Testability Enhancement for Logic Built-In Self TestBakshi, Dhrumeel 02 November 2012 (has links)
With the increase of device complexity and test-data volume required to guarantee adequate defect coverage, external testing is becoming increasingly difficult and expensive. Logic Built-in Self Test (LBIST) is a viable alternative test strategy as it helps reduce dependence on an elaborate external test equipment, enables the application of a large number of random tests, and allows for at-speed testing. The main problem with LBIST is suboptimal fault coverage achievable with random vectors. LFSR reseeding is used to increase the coverage. However, to achieve satisfactory coverage, one often needs a large number of seeds. Computing a small number of seeds for LBIST reseeding still remains a tremendous challenge, since the vectors needed to detect all faults may be spread across the huge LFSR vector space. In this work, we propose new methods to enable the computation of a small number of LFSR seeds to cover all stuck-at faults as a first-order satisfiability problem involving extended theories. We present a technique based on SMT (Satisfiability Modulo Theories) with the theory of bit-vectors to combine the tasks of test-generation and seed computation. We describe a seed reduction flow which is based on the `chaining' of faults instead of pre-computed vectors. We experimentally demonstrate that our method can produce very small sets of seeds for complete stuck-at fault coverage. Additionally, we present methods for inserting test-points to enhance the testability of a circuit in such a way as to allow even further reduction in the number of seeds. / Master of Science
|
4 |
Integrated Enhancement of Testability and Diagnosability for Digital CircuitsRahagude, Nikhil Prakash 29 November 2010 (has links)
While conventional test point insertions commonly used in design for testability can improve fault coverage, the test points selected may not necessarily be the best candidates to aid <em>silicon diagnosis</em>. In this thesis, test point insertions are conducted with the aim to detect more faults and also synergistically distinguish currently indistinguishable fault-pairs. We achieve this by identifying those points in the circuit, which are not only hard-to-test but also lie on distinguishable frontiers, as Testability-Diagnosability (TD) points. To this end, we propose a novel low-cost metric to identify such TD points. Further, we propose a new DFT + DFD architecture, which adds just one pin (to identify test/functional mode) and small additional combinational logic to the circuit under test. Our experiments indicate that the proposed architecture can distinguish 4x more previously indistinguishable fault-pairs than existing DFT architectures while maintaining similar fault coverages. Further, the experiments illustrate that quality results can be achieved with an area overhead of around 5%. Additional experiments conducted on hard-to-test circuits show an increase in <em>fault coverage</em> by 48% while maintaining similar diagnostic resolution.
Built-in Self Test (BIST) is a technique of adding additional blocks of hardware to the circuits to allow them to perform self-testing. This enables the circuits to test themselves thereby reducing the dependency on the expensive external automated test equipment (ATE). At the end of a test session, BIST generates a signature which is a compaction of the obtained output responses of the circuit for that session. Comparison of this signature with the reference signature categorizes the circuit as error free or buggy. While BIST provides a quick and low cost alternative to check circuit's correctness, diagnosis in BIST environment remains poor because of the limited information present in the lossily compacted final signature. The signature does not give any information about the possible defect location in the circuit. To facilitate diagnosis, researchers have proposed the use of two additional on-chip embedded memories,response memory to store reference responses and fail memory to store failing responses. We propose a novel architecture in which only one additional memory is required. Experimental results conducted on benchmark circuits substantiate that the same fault coverage can be maintained using just 5% of the available test vectors. This reduces the size of memory required to store responses which in turn reduces area overhead. Further, by adding test points to the circuit using our proposed architecture, we can improve the diagnostic resolution by 60% with respect to external testing. / Master of Science
|
Page generated in 0.1513 seconds