Submitted by Mario BC (mario@bc.ufrpe.br) on 2016-05-13T16:13:46Z No. of bitstreams: 1 Gleiciane Teodoro da Silva.pdf: 1478937 bytes, checksum: 57cb2700d2dfbad91830878601aa8ee0 (MD5) / Made available in DSpace on 2016-05-13T16:13:46Z (GMT). No. of bitstreams: 1 Gleiciane Teodoro da Silva.pdf: 1478937 bytes, checksum: 57cb2700d2dfbad91830878601aa8ee0 (MD5) Previous issue date: 2015-07-21 / The sear for innovation has become a condition for organizations to remain in the market. So it is a growing demand for increasingly sophisticated innovations that meet the capitalist market. Technological innovation is a factor that facilitates the development of production activities in the sector in which they are involved, from activities directed to the agricultural sector, even the most developed sectors, such as industry sector. Greater emphasis is given to the agricultural sector in this work, as from the 90 Brazilian agriculture has modernized ensuring higher productivity and lower production costs. The reality diverges when considered agricultural production in consortium with the family farm, and, in general, a manufacturing few technological resources. Thus, this research analyzes the technological innovation process in called Polo Agreste of Pernambuco Biodiesel Production, between the period 2004 and 2014. The work specifically investigates the technological innovation indicators of process and product, and to identify the types of innovation that characterize the production activity in the region and the support of institutions for the promotion of innovation. For this, it is used a methodology adapted from the Innovation Survey Manual (PINTEC), prepared by the Brazilian Institute of Geography and Statistics (IBGE) following the Oslo Manual guidelines adjusted to the reality of the country. The results show that the action of the research and teaching institutions spurred innovations in Polo biodiesel Wasteland, providing increased product innovation and contribution processes. This is an open innovation where institutions are interrelated facilitating the development of production activity. / A busca pela inovação se tornou uma condição para que as organizações se mantenham no mercado. Por isso, é crescente a demanda por inovações cada vez mais sofisticadas capazes de atender o mercado capitalista. A inovação tecnológica é um fator que facilita o desenvolvimento das atividades de produção no setor em que estão envolvidas, desde as atividades direcionadas ao setor agrícola, até os setores de maior desenvolvimento, como o setor da indústria. Ênfase maior é dada ao setor da agricultura neste trabalho, visto que a partir da década de 90 a agricultura brasileira tem se modernizado, garantindo maior produtividade e redução dos custos de produção. A realidade diverge quando considerada uma produção agrícola em consórcio com a agricultura familiar, sendo, no geral, uma fabricação de poucos recursos tecnológicos. Assim, esta pesquisa analisa o processo de inovação tecnológica no chamado Polo Agreste de Produção de Biodiesel de Pernambuco, entre o período de 2004 e 2014. O trabalho investiga especificamente os indicadores de inovação tecnológica de processo e de produto, além de verificar as tipologias de inovação que caracterizam a atividade de produção na região e o apoio das instituições para a promoção da inovação. Para isso, utiliza-se como metodologia uma adaptação do Manual da Pesquisa de Inovação (PINTEC), elaborado pelo Instituto Brasileiro de Geografia e Estatística (IBGE) que segue as diretrizes do Manual de Oslo ajustado para a realidade do país. Os resultados mostram que a ação das instituições de pesquisas e de ensino impulsionaram as inovações no Polo Agreste de biodiesel, proporcionando aumento na contribuição de inovação de produtos e de processos. Trata-se de uma inovação aberta onde as instituições se inter-relacionam facilitando o desenvolvimento da atividade de produção.

Através da nova interpretação e compreensão dos aspectos em relação moda identidade, design social, e da maneira como se encontra o comportamento da sociedade consumista, tende-se a elevar a demanda do indivíduo contemporâneo, preocupado com o futuro ambiental. O surgimento de novos cenários e atores indica uma maior visibilidade à postura de responsabilidade socioambiental na área de moda e possibilita a consolidação da sociedade contemporânea. Devido a estas premissas, esta pesquisa teve como objetivo propor procedimentos, utilizando como referência a metodologia projetual de Löbach para desenvolvimento de produtos sustentáveis têxteis a partir de sobras dos materiais das micro e pequenas confecções. A Metodologia utilizada foi a pesquisa bibliográfica, que constitui o procedimento básico para os estudos monográficos, e a pesquisa exploratória, pois não requer a formulação de hipóteses para serem testadas. Ela se restringe por definir objetivos, buscar mais informações sobre determinado assunto de estudo e identificar qual o melhor método a ser utilizado. No caso deste projeto, a ideia foi adaptar a sintetização de Löbach no processo de design, relacionando-o com o processo de resolução de problemas e o processo criativo, em quatro iniciativas essenciais: definir claramente o problema (preparação); reunir informações sobre o problema, analisá-las e relacioná-las criativamente entre si (geração); criar alternativas de soluções para o problema, julgando-as segundo critérios estabelecidos (avaliação) e desenvolver a alternativa mais adequada, concretizando a (realização). Após a elaboração do projeto, comprovou-se que a metodologia utilizada se mostrou viável para o desenvolvimento de produtos sustentáveis, voltados para a sociedade e consumo / Through the new interpretation and understanding of the aspects about fashion-identity, social design, and how the behavior of the consumer society, tend to increase the demand of the contemporary individual, worried about the future. The emergence of new models and actors indicates a greater visibility to the posture of social and environmental responsibility in the area of fashion and enables consolidation of a contemporary society. Due to these premises, this research aimed to propose procedures, using as a reference the design methodology of Löbach for development of sustainable textile products from leftovers from materials of micro and small manufacturing. The methodology used was bibliographical research to which constitutes the basic procedure for the monographic studies and exploratory research because it does not require the formulation of hypotheses to be tested. She is restricted by set goals, get more information about a particular subject to study and identify the best method to be used, in the case of this project, the idea was to adapt the Löbach synthesis in the design process, linking it with the problem-solving process and the creative process, on four key initiatives to clearly define the problem (preparation); gather information about the problem, analyze them and relate them creatively with each other (generation); create alternative solutions to the problem, judging the second criteria (evaluation) and develop the most suitable alternative, establishing the (realization). After the elaboration of the project proved that the methodology used proved to be viable for the development of sustainable products, geared to society and consumption

The thesis deals with the analysis of risks and ways of their solutions in the production process. Its main contribution is the design improvement of the production process of air conditioning systems in Lindab s. r. o. The thesis provides a comprehensive overview of the FMEA method with its elements aimed at process improvements, identifications of production risks, their causes, levels of severity, occurrence and detection. It is divided into a theoretical and practical part. The thesis is based on foreign literature and findings from research internship carried out in Lindab s. r. o. during studies at University of Economics, Prague.

The topic of this thesis is the choice of optimal production technology for the chosen representative. The aim of this work is to compare production on conventional machine and on NC and CNC machines. Both variants are evaluated in terms of efficiency, speed and economy of production. Outputs are based on recommended production procedures based on the number of pieces produced in the order.

The diploma thesis is focused on analyzing the range of suppliers in the IFE - CR, according to the used methods for finding the suitable candidates for implementing a returnable packaging. Apart from there are identify the materials, which could be used for reversible covers. The part of thesis is the proposal of covers and their economic evaluation and comparison with actual using containers. For getting the advantage of introducing the returnable packaging, the payback time of the project is determined. The characteristics of including area such as logistics, supply chain, production and used methods of analysis are part of the diploma thesis.

The master's thesis deals with risk prevention in the production of masterbatches in company Lifocolor, s.r.o. The theoretical part is focused on the overall risk management process, specifying individual methods of risk analysis. The following section pertains masterbatch production process. Analysis of history of disagreeable products, application of methods described in theoretical parts, their evaluation and design of corrective precautions are described in the practical part.

In this master´s thesis is after first part, which is study explosions and detonators work, solutions to technology of production case of delay. First is anatomize technology of construction where is solve the form of stock and material from which the case of delay should be produce. Next capitol is about the ways of production of this part. The output of the thesis is complete production processes at all levels of detonators and selection of machine according to technical and economical aspects.

This diploma thesis deals with the concept of creating a graphical user interface for the animation of a production process. The thesis is divided into theoretical and practical part. The theoretical part contains a research of the development of the software used for the process simulation. Further there are described the basics of using simulation and animation, its advantages and disadvantages. The theoretical part of this work is completed by the description of the technology and software, which was used for creating graphical interfaces for the animation. The practical part is focused on developing software interfaces. It describes the elements which were used in programming and there are explained basic functions of the software. The practical part is completed with a summary of the output data which the program offers the user. The thesis is accompanied by a CD, which contains the source code and the final vision of the program.

This document describes the design of new production technology specific part in an engineering company. The specific part is manufactured on a machining center by milling method. To create model was used SolidWorks software and to create CNC program was used SolidCAM program. There is production process created with new and old technologies. There is a comparison of both technologies in conclusion.

This master's thesis deals with optimalization of production flows and processes in se-lected part of the company ATONA s. r. o. Realized suggestions for improvement are based on finding the current state by the corresponding methods. New state is analysed with same methods and compared with original state, also benefits of the realized opti-mization are determined.