Les panneaux photovoltaïques ont pris ces dernières années une place importante dans le secteur de l’énergie. Les performances de ces panneaux dépendent notamment de la qualité et de l’homogénéité du silicium utilisé et des impuretés qu’il contient. Pour obtenir du silicium photovoltaïque, on peut utiliser un procédé de solidification dirigée afin d’obtenir un lingot de silicium de grade photovoltaïque à partir de silicium de grade métallurgique. Cette approche reste aujourd’hui difficile à simuler efficacement en raison de l’aspect multi-échelle du procédé et du suivi de l’interface mobile avec des transferts de masse et de chaleur à l’interface solide/liquide. Cette thèse présente la mise en œuvre d’une méthode originale de maillage glissant proposée pour réaliser un suivi adaptatif de l’interface mobile, afin d’améliorer l’efficacité des simulations. Dans un premier temps, la modélisation de la solidification dirigée d’un corps pur avec un tel maillage glissant est validée à l’aide d’une solution analytique dans une configuration diffusive de référence. L’impact de la méthode proposée est ensuite étudié dans une configuration de type Bridgman vertical en présence de convection naturelle dans la phase liquide. Dans un second temps, on s’intéresse à la ségrégation des impuretés dans cette même configuration. Pour cela, on propose une modélisation spécifique du rejet d’impuretés à l’interface, et on étudie l’impact sur les simulations de la méthode de maillage glissant proposée. Les résultats et les gains de performance pour les simulations sont discutés en faisant varier des paramètres de calcul et par comparaison avec des données de la littérature. / In recent years, photovoltaic panels took a key role in the energy sector. The efficiency of these panels depends notably on the quality of the processed silicon ingots and on their homogeneity regarding the impurities they include. In order to process photovoltaic silicon, one can use a directional solidification process to obtain a solar grade silicon ingot from a metallurgical grade silicon feedstock. This approach is still nowadays hard to simulate with efficiency because of the multi-scales aspects of the process and because of the front tracking of the interface, where some heat and mass transfer occurs. This thesis presents the implementation of an original moving mesh method, proposed in order to perform an adaptive front tracking of the moving interface. The aim is to improve the efficiency of the numerical simulations. In a first time, the directional solidification model of a pure substance with such a moving mesh is validated against an analytical solution based on a purely diffusive reference configuration. The influence of the proposed method is then studied on a vertical Bridgman configuration with natural convection in the liquid phase. In a second time, the segregation of impurities is considered in the same configuration. For this study, a specific model for the rejection of impurities is proposed at the solid/liquid interface, and the influence of the proposed moving mesh method on the results is as well explored. Finally, the results and the performance improvements for the numerical simulations are discussed through variations of the calculation parameters and through comparisons against data from the literature.

Le contrôle précis des boucles de régulation existantes sur une machine frigorifique est essentiel à son bon fonctionnement. Il existe plusieurs méthodes de régulation parmi lesquelles on retrouve la plus ancienne et la plus connue : la commande PID (Proportionnelle, Intégrale et Dérivée). Malgré la simplicité apparente des relations mises en jeu, le régulateur PID est assez délicat à ajuster sur des processus présentant de fortes perturbations comme les installations frigorifiques. L’objectif du travail présenté est de mettre en œuvre une commande prédictive fonctionnelle (PFC) afin de réguler la surchauffe en sortie d’évaporateur, la pression de condensation et la puissance frigorifique sur une installation munie d’un compresseur à vitesse variable. L’utilisation d’une commande PFC nécessite de réaliser une prédiction de l’évolution à venir de la sortie du procédé. C’est un modèle interne qui fait office de modèle de connaissance. En assimilant le procédé à un système du premier ordre, la mise en œuvre de cette commande ne nécessite que trois paramètres : un gain statique, une constante de temps et un retard pur. L’originalité de la démarche développée a consisté à réaliser une modélisation physique de la machine afin de déterminer les paramètres précédents par une approche macroscopique. Une bibliothèque de modèles physiques a été élaborée permettant de simuler le comportement de différents évaporateurs, condenseurs, compresseurs ou vannes de détente. La commande développée a ensuite été implantée sur un automate industriel programmable et des expériences ont été réalisées sur deux machines différentes. La première est constituée de deux échangeurs à tubes et calandre et d’un compresseur à pistons, alors que la seconde comprend un évaporateur à plaques, une batterie à ailettes et un compresseur à vis. / An accurate control of fluids flow is essential in any refrigeration system. As the conventional Proportional-Integral-Derivative (PID) control with invariable parameters can lead to unsatisfactory performance because of the variation of refrigeration unit parameters under disturbances, the aim of the work presented here is to develop a method for using Predictive Functional Control (PFC) to regulate the evaporator superheat, the condensing pressure and the cooling capacity on a variable-speed refrigeration system. Using a predictive controller requires to predic future change at the output of the process. This prediction is based on an internal model used as known model. By assuming that the behaviour of refrigerating machine heat exchangers can be represented using a first-order model, the implementation of PFC requires only three parameters: gain, time constant and time delay. In order to determine these parameters an original method has been developed which is based on the physical modelling of the machine. Physical models for different types of evaporator, condenser, compressor or expansion valve have been established to quantify heat transfer and refrigerant flow rate in these components. The control system created has been incorporated into an industrial programmable logic controller and used for experiments on two different refrigerating machines: the first one is composed of two shell and tube heat exchangers and a reciprocating compressor, whereas the second one is composed of a plate evaporator, a finned-tube condenser and a screw compressor. The tests performed show that PFC controller succeed in maintaining a precise chilled liquid temperature.

<p>The aim of my work is to model a segment of a unit cell of a fuel cell stack using numerical methods which is classified as computational fluid dynamics and implementing the work in a commercial computational fluid dynamics package, FLUENT. The focus of my work is to study the thermal distribution within this segment. The results of the work aid in a better understanding of the fuel cell operation in this temperature range. At the time of my investigation experimental results were unavailable for validation and therefore my results are compared to previously published results published. The outcome of the results corresponds to this, where the current flux density increases with the increasing of operating temperature and fixed operating voltage and the temperature variation across the fuel cell at varying operating voltages. It is in the anticipation of determining actual and or unique material input parameters that this work is done and at which point this studies results would contribute to the understanding high temperature PEM fuel cell thermal behaviour, significantly.</p>

<p>The aim of my work is to model a segment of a unit cell of a fuel cell stack using numerical methods which is classified as computational fluid dynamics and implementing the work in a commercial computational fluid dynamics package, FLUENT. The focus of my work is to study the thermal distribution within this segment. The results of the work aid in a better understanding of the fuel cell operation in this temperature range. At the time of my investigation experimental results were unavailable for validation and therefore my results are compared to previously published results published. The outcome of the results corresponds to this, where the current flux density increases with the increasing of operating temperature and fixed operating voltage and the temperature variation across the fuel cell at varying operating voltages. It is in the anticipation of determining actual and or unique material input parameters that this work is done and at which point this studies results would contribute to the understanding high temperature PEM fuel cell thermal behaviour, significantly.</p>

The modern military aircraft can be defined as a System of Systems (SoS); several distinct systems operating simultaneously across boundary interfaces. As the on-board subsystems have become more complex and diverse, the development process has become more isolated. When considering thermal management of distributed heat loads, the aircraft has become a collection of individually optimised components and subsystems, rather than the implementation of a single system to perform a given task. Avionic thermal management is quickly becoming a limiting factor of aircraft performance, reliability and effectiveness. The challenge of avionic thermal management is growing with the increasing complexity and power density of avionic packages. The aircraft relies on a heat rejection growth capacity to accommodate the additional through-life avionic heat loads. Growth capacity is defined as an allowable thermal loading growth designed into the system by the underutilisation of spatial and cooling supply at aircraft introduction; however, this is a limited resource and aircraft subsystem cooling capability is reaching a critical point. The depleted growth capacity coupled with increased avionic power demands has led to component thermal failure. However, due to the poor resolution of existing data acquisition, experimental facilities or thermodynamic modeling, the exact inflight-operating conditions remain relatively unknown. The knowledge gap identified in this work is the lack of definitive methodology to generate high fidelity data of in-flight thermal conditions of fast-jet subsystems and provide evidence towards effective future thermal management technologies. It is shown that, through the development of a new methodology, the knowledge gap can be reduced and as an output of this approach the unknown system behaviour can be defined. A multidisciplinary approach to the replication, analysis and optimisation of a fast-jet TMS is detailed. The development of a new Ground Test Facility (GTF) allows previously unidentified system thermal behaviour to be evaluated at component, subsystem and system level. The development of new data to characterise current thermal performance of a fast jet TMS allows recommendations of several new technologies to be implemented through a component led integrative system optimisation. This approach is to consider the TMS as a single system to achieve a single goal of component thermal management. Three technologies are implemented to optimise avionic conditions through the minimisation of bleed air consumption, improve avionic reliability through increased avionic component isothermalisation and increase growth capacity through improved avionic heat exchanger fin utilisation. These component level technologies improved system level performance. A reduction in TMS bleed air consumption from 1225kg to 510kg was found to complete a typical flight profile. A peak predicted aircraft specific fuel consumption saving of 1.23% is seen at a cruise flight condition because of this approach to avionic thermal management.

Magister Scientiae - MSc / The aim of my work is to model a segment of a unit cell of a fuel cell stack using numerical methods which is classified as computational fluid dynamics and implementing the work in a commercial computational fluid dynamics package, FLUENT. The focus of my work is to study the thermal distribution within this segment. The results of the work aid in a better understanding of the fuel cell operation in this temperature range. At the time of my investigation experimental results were unavailable for validation and therefore my results are compared to previously published results published. The outcome of the results corresponds to this, where the current flux density increases with the increasing of operating temperature and fixed operating voltage and the temperature variation across the fuel cell at varying operating voltages. It is in the anticipation of determining actual and or unique material input parameters that this work is done and at which point this studies results would contribute to the understanding high temperature PEM fuel cell thermal behaviour, significantly. / South Africa

Avstängda kärnkraftverk berövar många människor av elektricitet och det skulle ha en negativ inverkan både på företagets framtoning och mänskliga aktiviteter. På grund av detta behöver tillgängligheten av utrustningen i alla byggnaderna som kärnkraftverken består ses till. HVAC-system (Heating, Ventilation and Air Conditioning) spelar en viktig roll när det gäller tillgänglighet av utrustning eftersom dessa system ser till pålitligheten är på topp genom att anpassade omgivningsförhållanden till utrustningen. Att designa ventilationssystemet rätt är därför mycket viktigt och måste göras noggrant. Denna rapport introducerar metodologin för att designa och optimera ett ventilationssystem för en av byggnaderna i ett kärnkraftverk. Utöver detta utvecklas och beskrivs en metodologi för att designa ett rökkontrollssystem för en byggnad som ingår i kärnkraftverket. Dessa metodologier har implementerats för en byggnad i en demineraliseringsstation, Hinkley Point C project. / During nuclear power plants shutdown many people could be deprived of electricity and it would have a negative impact both on the company’s image and on people activities. As a consequence, availability of equipments in the different buildings which compose the power plant needs to be assured. HVAC system (Heating, Ventilation and Air Conditioning) plays an important role on the reliability of these equipments as it makes sure that ambient conditions in the buildings fit the operating temperature range of the equipments. Consequently sizing a ventilation system is really important and it needs to be carried out seriously. This paper introduces the methodology to size and optimize a ventilation system for nuclear power plants’ building. This paper also develops the methodology used to size a smoke control system in a nuclear related building. Direct application of this methodology has been realised for a specific building which is the demineralization station of Hinkley Point C project.

Wards occupy significant proportions of hospital floor areas and due to their constant use, represent a worthwhile focus of study. Single-bed wards are specifically of interest owing to the isolation aspect they bring to infection control, including airborne pathogens, but threats posed by airborne pandemics and family-involvement in hospital care means cross-infection is still a potential problem. In its natural mode, ventilation driven by combined wind and buoyancy forces can lead to energy savings and achieve thermal comfort and high air change rates through secure openings. These are advantageous for controlling indoor airborne pathogens and external air and noise pollution. However, there is lack of detailed evidence and guidance is needed to gain optimum performance from available natural ventilation systems. This research is a proof of concept investigation into the feasibility and impact of natural ventilation systems targeting airflow rates, thermal comfort, heating energy and control of pathogenic bio-aerosols in hospital wards. In particular, it provides insights into the optimal areas of vent openings which could satisfy the complex three-pronged criteria of contaminant dilution, low heating energy and acceptable thermal comfort for occupants in a naturally ventilated single bed ward. The main aim of this thesis is the structured study of four systems categorised into three groups: Simple Natural Ventilation (SNV) in which single and dual-openings are used on the same external wall; Advanced Natural Ventilation (ANV) which is an emerging concept; and finally Natural Personalised Ventilation (NPV) which is an entirely new concept borne out of the limitations of previous systems and gaps in literature. The focus of this research is in the exploratory study of the weaknesses and potentials of the four systems, based on multi-criteria performances metrics within three architecturally distinct single-bed ward designs. In contributing to the body of existing knowledge, this thesis provides a better understanding of the performances of three existing systems while presenting the new NPV system. The analysis is based on dynamic thermal modelling and computational fluid dynamics and in the case of the NPV system, salt-bath experiments for validation and visualisation of transient flows. In all cases, wards were assumed to be free of mechanical ventilation systems that might influence the natural flow of air. The thesis meets three major objectives which have resulted in the following contributions to current knowledge: An understanding of the limitations and potentials of same-side openings, especially why and how dual-openings can be useful when retrofitted into existing wards. Detailed analysis of bulk airflow, thermal comfort, heating energy and room air distribution achievable from existing SNV and ANV systems, including insights to acceptable trickle ventilation rates, which will be particular useful in meeting minimum dilution and energy requirements in winter. This also includes qualitative predictions of the airflow pattern and direction obtainable from both systems. The innovation and study of a new natural ventilation system called Natural Personalised Ventilation (NPV) which provides fresh air directly over a patient s bed, creating a mixing regime in the space and evaluation of its comfort and energy performances. A low-energy solution for airborne infection control in clinical spaces is demonstrated by achieving buoyancy-driven mixing ventilation via the NPV system, and a derivative called ceiling-based natural ventilation (CBNV) is shown. A comparative analysis of four unique natural ventilation strategies including their performance rankings for airflow rates, thermal comfort, energy consumption and contaminant dilution or removal using an existing single-bed ward design as case study. Development of design and operational recommendations for future guidelines on utilising natural ventilation in single-bed wards either for refurbishment or for proposed designs. These contributions can be extended to other clinical and non-clinical spaces which are suitable to be naturally ventilated including treatment rooms, office spaces and waiting areas. The findings signify that natural ventilation is not only feasible for ward spaces but that there is opportunity for innovation in its application through further research. Future work could focus on related aspects like: impacts of fan-assisted ventilation for a hybrid flow regime; pre-heating of supply air; integration with passive heat recovery systems as well the use of full-scale experiments to fine-tune and validate findings.

No description available.

La capture de CO2 par adsorption sur des solides poreux (adsorbants) est une alternative prometteuse en raison de sa sélectivité et de sa faible consommation d’énergie. Nous avons étudié l'adsorption in-situ de CO2 sur des adsorbants solides en combinant la spectroscopie infrarouge par réflexion diffuse (DRIFT) avec la thermographie infrarouge afin de mieux comprendre les mécanismes d'interaction CO2-adsorbant et ainsi optimiser sa captation dans des procédés de capture en post-combustion. La thermographie IR est utilisée pour détecter la source de chaleur transitoire provenant de la surface de l’adsorbant au cours de l'adsorption de CO2. Un modèle de transfert de chaleur a été développé afin d’estimer les chaleurs d’adsorption. Un mini réacteur conçu pour la DRIFT nous a permis d’identifier les espèces adsorbées et d'étudier leur évolution sur la surface de l’adsorbant selon la température et l'atmosphère environnante. Enfin, le couplage d’informations provenant des deux approches nous a permis l’investigation haut-débit des paramètres clefs pour le choix des adsorbants les plus performants. / CO2 capture via adsorption process on porous materials (adsorbents) is a promising alternative due to its high selectivity and low energy penalties. We have investigated in-situ CO2 adsorption on solid adsorbents by combining Diffuse Reflectance Infrared Fourier Transform spectroscopy (DRIFT) with infrared thermography to better understand the mechanisms controlling CO2-adsorbent interactions and thus optimize its capture in post-combustion capture processes. Infrared thermography is used to detect the transient heat source coming from the adsorbent surface during CO2 adsorption. A heat transfer model has been developed in order to estimate the adsorption heats. A model chemical reactor designed for DRIFT allowed us to clearly evidence the adsorbed species and to study the surface species evolution according to the temperature and the surrounding atmosphere. Finally, the coupling of information coming from the two approaches allowed us a high-throughput investigation of key parameters for the selection of the most efficient adsorbents.