Le groupe Mäder s’est lancé depuis quelques années dans une nouvelle thématique, la polymérisation « dual-cure ». Il s’agit d’un processus photo-thermique couplant réactivité photochimique et thermique. Cette thématique vise des applications pour lesquelles le produit est épais et/ou fortement chargé. La photopolymérisation étant limitée en profondeur, le processus thermique permet de compléter la polymérisation au coeur de l’échantillon ou encore dans les zones non accessibles par la technologie UV/LED. Cette thématique a fait l’œuvre d’une première thèse (2007-2010) menée par le doctorant Adrien Criqui au sein du Département de Photochimie Général (DPG). Au cours de cette thèse, la polymérisation radicalaire photo-thermique à partir d’aldéhydes a été étudiée. Des résultats concluant ont été obtenus donnant naissance à une technologie innovante notamment avec des applications sous air. Dès lors, il s’est posé la question de savoir si les aldéhydes pouvaient être utilisés dans la polymérisation cationique photo-thermique. La première année de thèse a donc commencé par l’étude du potentiel des aldéhydes dans la polymérisation cationique photo-thermique de résine époxydes. Les aldéhydes ont montrés qu’ils sont de bons photosensibilisateurs de la photopolymérisation cationique amorcée par un sel d’iodonium. Certaines structures aldéhydes couplées à un sel d’iodonium ont conduit à une polymérisation thermique. Les vitesses de polymérisation sont néanmoins trop lentes pour pouvoir être exploitées. La voie des aldéhydes a donc été abandonnée suite à ces résultats. Malgré ceci, ce sujet a fait l’œuvre d’une étude mécanistique qui a permit de conclure que le couple sel d’iodonium/aldéhyde réagit selon un mécanisme redox au courant duquel l’auto-oxydation de l’aldéhyde est indispensable. La réduction du photoamorceur par le radical issu de l’auto-oxydation de l’aldéhyde permet d’amorcer la polymérisation cationique. Par la suite, une importante bibliographie sur la polymérisation cationique des époxydes a été réalisée, le but étant de rechercher de nouveaux systèmes amorceurs. Plusieurs systèmes ont alors été retenus à savoir, les acides de Lewis et de Brönsted ainsi que les espèces cationiques. Les acides de Lewis étudiés n’ont pas apportés de résultats satisfaisants et ont donc été abandonnés. Parmi les acides de Brönsted, les acides sulfoniques ont été sélectionné. Des résultats mitigés ont été obtenus. En effet, soit la polymérisation s’est montrée trop rapide et non contrôlable soit trop lente. Le mécanisme de polymérisation amorcé par ces espèces ne semble pas adapté aux résines époxydes. La synthèse d’une structure appropriée a été envisagée mais pour des raisons stratégiques a été par la suite abandonnée. Plusieurs structures d’espèces cationiques ont été étudiées, à la fois des espèces commerciales (ex : triphénylcarbénium, …) ainsi que des espèces synthétisées au laboratoire (ex : xanthénium, …). Les travaux effectués sur ces systèmes amorceurs ont montrés qu’un amorçage indirect avec formation de l’amorceur in situ était une voie à privilégier.A partir de ce constat, deux technologies ont été étudiées. La première, à caractère purement académique, concerne une voie redox. Un système déjà publié basé sur le système sel d’iodonium/sel de cuivre/acétoïne a été ré-évalué. Les résultats obtenus ne correspondant pas au mécanisme publié, une étude mécanistique a été réalisée afin de proposer un nouveau mécanisme réactionnel. Le mécanisme de réaction est basé sur une réaction de décomposition, probablement par complexation, du sel d’iodonium par un sel de cuivre. Le produit de décomposition formé étant sensible à l’hydrolyse, il est possible d’accélérer la vitesse de polymérisation par la présence d’un composé hydroxylé type acétoïne. [...] / In the past few years, The Mäder Group has launched a new theme, " dual- cure " polymerization and process. This process is a coupling between photochemical and thermal reactivity. This theme is designed for applications where the product is thick and/or loaded with fillers. The photopolymerization is limited in depth and then the thermal process is used to complete the polymerization of the sample or in the non-irradiated areas. This theme has been the work of a first PhD (2007-2010) conducted by the student Adrien Criqui in the “Département de Photochimie Générale (DPG)”. In this PhD, the photo- and thermal radical polymerization with aldehydes was studied. Results have given birth to an innovative technology, particularly with applications under air. Therefore, it wonder if aldehydes could be used in the photo- and thermal cationic polymerization.The first year of PhD has begun with the study of the potential of aldehydes in the photo- and thermal cationic polymerization of epoxy resin. Aldehydes have shown that they are good photosensitizers of the cationic photopolymerization initiated by an iodonium salt. Some aldehydes coupled with an iodonium salt led to thermal polymerization. However rates of polymerization are too slow to be exploited. The way of aldehydes has been aborted due to these results. Despite this, this topic has been the work of a mechanistic study that led to the conclusion that the iodonium/aldehyde salt couple reacts according to a redox mechanism in which the auto-oxidation of the aldehyde is essential. The reduction of the photoinitiator by the radical derived from the auto- oxidation of the aldehyde aollow to initiate cationic polymerization.Subsequently, an extensive bibliography on the cationic polymerization of epoxides was carried out with the aim to find new initiator systems. Therefore, several systems have been selected i.e., Lewis and Brösted acids, and cationic species. Lewis acids studied gave no satisfactory results and were therefore given up. Among the Bronsted acids, sulfonic acids were selected. Mixed results were obtained. Sometimes the polymerization has been too fast and sometimes too slow. The polymerization mechanism initiated by these species does not seem suitable for epoxy resins. The synthesis of a suitable sulfonic acid was considered but for strategic reasons was later dropped. Several structures of cationic species have been also studied, both commercial species (eg: triphenylcarbenium , ... ) as well as synthesized species (eg: xanthénium ...). Work on these initiator systems convinced to use an indirect method to initiate polymerization.From this, two technologies have been studied. The first, relates to a redox pathway. A published system based on iodonium salt/copper salt/acetoïne combination has been re-evaluated. Results do not match the published mechanism. A new mechanistic has been proposed. The reaction mechanism is based on a decomposition reaction, presumably by complexation, of the iodonium salt with a copper salt. The decomposition product formed is susceptible to hydrolysis. Rates of polymerization have been accelerated the by the presence of a hydroxy compound like acetoïne. From the knowledges, ways of controlling the rate of polymerization (eg: complexing metal salt) and a new initiator system have been proposed. The second technology relates to a bi-component consisting of a photoinitiator/thermal initiator and a co- initiator. The reaction between the initiator and co-initiator allows initiating the polymerization. The polymerization rate can be controlled from the structure of initiator and co-initiator. The initiator is also a photoinitiator, the photo- and thermal nature is ensured. Two classes of co-initiators have been studied from a fundamental point of view (hydroperoxides and vinyl ether). It has been shown that hydroperoxides reduce initiator by an electron transfer. [...]

This study is divided into three parts. Part I deals with the mechanism of the self-initiated polymerization (or thermal polymerization) of styrene in the gas phase. In this work, we present the first direct evidence for the thermally self-initiated polymerization of styrene in the gas phase. Our approach is based on on-line analysis of the gas phase Oligomers by mass-selected ion mobility. The mobility measurements provide structural information on the ionized oligomers based on their collision cross-sections (Ω) which depend on the geometric shapes of the ions. Theoretical calculations of possible structural candidates of the Oligomers ions are then used to compute angle averaged Ω for comparison with the measured ones. The agreement between the measured and calculated Ω of the candidate structures provides reliable assignments to the structures of the oligomers. Furthermore, collisional-induced dissociations of the mass-selected oligomer ions provide further support for the structures obtained from the mobility measurements. Our results indicate that the gas phase polymerization of styrene proceeds via essentially the same initiation mechanism (the Mayo mechanism) as in condensed phase polymerization. The structural evidence, the mechanism of formation and the observed fragmentation pathway of the growing dimers and trimers in the gas phase are presentedIn Part II the solvation of a variety of metal cations by benzene clusters have been studied using laser vaporization, cluster beam and time-of-flight mass spectrometry techniques. In this work strong magic numbers were observed for clusters containing 10, 13 and 14 benzene molecules depending on the nature of the metal cation involved. The metal cations exhibiting preference solvation by 14 benzene molecules show a strong tendency to form sandwich structures with two benzene molecules. The interpretation of these results in view of the proposed structures and the growth patterns of the clusters are presented. In Part III, the work is focused on the investigation of the intracluster ion molecule reactions following the generation of Mg+ within the polar clusters (water, methanol, ether and acetonitrile).

The stable free radical polymerization methodology for production of controlled macromolecules was investigated using a novel monomer, 2-vinylnaphthalene. Initial polymerizations resulted in molecular weight distributions typical of conventional free radical polymerization techniques (>2.0). Manipulation of the initiator concentration and the molar ratio of initiator to nitroxide demonstrated no significant control over the resulting polymer products. Analysis of the polymerization kinetics for a 2-vinylnaphthalene polymerization performed in the presence and absence of the free radical initiator revealed identical monomer consumption profiles as well as pseudo first order kinetics indicating a significant degree of the thermal polymerization was occurring at the polymerization temperature (130°C). Comparison of the thermal polymerization propensity of 2-vinylnaphthalene and styrene revealed an increased tendency for 2-vinylnapthahlene to undergo thermal polymerization. Styrene is considered highly active in its propensity to thermally polymerize. However, an Arhenius analysis using in situ FTIR was employed to determine the activation energy for the thermal polymerization of styrene and 2-vinylnaphthalene. The 2-vinylnaphthalene activation energy for thermal polymerization was determined for the first time to be almost 30 kJ/mol less than styrene. A novel modified Mayo mechanism was proposed for the 2-vinylnaphthalene thermal initiation mechanism. Moreover, this thermal initiation was employed to initiate nitroxide mediated polymerizations of styrene. This first use of a 2-vinylnaphthalene initiating system resulted in polystyrene with a large macrocyclic initiating fragment. The presence of the initiating moiety was studied using both UV-Vis spectroscopy and 1H NMR spectroscopy. The extension of stable free radical polymerization to the acrylate monomer family was examined using a novel nitroxide mediator, N-tert-butyl-N-[1-diethylphosphono-(2,2-dimethylpropyl)] nitroxide (DEPN). The synthesis of DEPN was monitored using in situ FTIR spectroscopy to determine optimum reaction conditions. The purified nitroxide was subsequently employed in the synthesis of various block and random acrylate copolymers. The production of a unique amphiphilic block copolymer consisting of acrylic sequences was achieved. Poly(t-butyl acrylate-b-2ethylhexyl acrylate-b-t-butyl acrylate) was synthesized using the SFRP process. The t-butyl functionalities were subsequently removed in a post-polymerization acid catalyzed hydrolysis. The effect of steric bulk and electronic factors on the resulting SFRP process was also investigated and revealed similar polymerization kinetics for various alkyl acrylates. However, addition of a hydroxyl containing monomer, 2-hydroxyethyl acrylate, resulted in an increase in the polymerization rate up to 2 times. The rate enhancement was attributed to hydrogen bonding effects and this was confirmed using the unprecedented addition of dodecanol, which also demonstrated a significant rate enhancement. Block copolymers were also achieved using a novel difunctional nitroxide synthesized from 4-hydroxy TEMPO and 1,6-hexamethylene diisocyanate. The identity of the nitroxide was confirmed using mass spectrometry and 1H NMR. The dinitroxide was used in the polymerization of styrene and subsequently used to produce symmetric ABA triblock copolymers with t-butyl styrene using a unique two-step polymerization route. In addition, the dinitroxide demonstrated an increased tendency for decomposition due to the complex mediation equilibrium. The decomposition was studied using GPC to evaluate the decomposition effects on the polymerization. Results of the research efforts presented herein are written as individual research reports with contributing authors and pertinent literature reviews presented at the beginning of each chapter. / Ph. D.