221 |
Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretchingZhao, X., Ye, L., Coates, Philip D., Caton-Rose, Philip D. 12 May 2013 (has links)
Yes / Highly oriented poly(lactic acid) (PLA)/thermoplastic polyurethane (TPU) blends were fabricated through solid hot stretching technology in an effort to improve the mechanical properties and blood biocompatibility of PLA as blood-contacting medical devices. It was found that the tensile strength and modulus of the blends can be improved dramatically by stretching. With the increase of draw ratio, the cold crystallization peak became smaller, and the glass transition and the melting peak moved to high temperature, while the crystallinity increased, and the grain size of PLA decreased, indicating of the stress-induced crystallization during drawing. The oriented blends exhibited structures with longitudinal striations which indicate the presence of micro-fibers. TPU phase was finely and homogeneously dispersed in the PLA, and after drawing, TPU domains were elongated to ellipsoid. The introduction of TPU and orientation could enhance the blood compatibility of PLA by prolonging kinetic clotting time, and decreasing hemolysis ratio and platelet activation.
|
222 |
Ceramic Si-C-N-O cellular structures by integrating Fused Filament Fabrication 3-D printing with Polymer Derived CeramicsKulkarni, Apoorv Sandeep 11 July 2022 (has links)
Ceramic additive manufacturing is gaining popularity with methods like selective laser sintering (SLS), binder jetting, direct ink writing and stereolithography, despite their disadvantages. Laser sintering and binder jetting are too expensive, while direct ink writing lacks resolution and stereolithography lacks scalability.
The project aims to combine one of the most versatile, affordable, and readily available 3D printing methods: fused filament fabrication (FFF) with polymer derived ceramics to produce cellular ceramics to overcome the disadvantages posed by the other methods. The process uses a two-step approach. The first step is to 3D print the part using a polymer FFF 3D printer with a thermoplastic polyurethane filament and the second step is to impregnate the part in a polysilazane preceramic polymer and then pyrolyze it in an inert environment up to 1200C. The resulting product is a high-resolution cellular ceramic of the composition SiOC(N).
This type of cellular ceramic can find an application in several fields such as scaffolds for bone tissue regeneration, liquid metal filtering, chemical and gas filtering, catalytic converters and electric applications. The process can provide an affordable alternative to the products used in these fields currently.
|
223 |
Chemical modification of starch in order to get thermoplastic propertiesHallbert, Emma, Wadman, Elsa January 2023 (has links)
There are numerous advantages of replacing traditional non-biodegradable synthetic plastics with bio-based plastics. Starch is globally available, cheap, renewable, and biodegradable. However, starch has a poor product performance and is relatively difficult to process, as conventional melt processing techniques cannot be used. By introducing thermoplastic properties to starch, the mechanical properties and processability can be enhanced. The aim of the project was to modify starch and give it thermoplastic properties. The implementation of this included various experiments, where aromatic, cyclic and aliphatic side groups were added to the biopolymer. The effect of the different side groups provided valuable insight into how the material properties changed. Subsequently, the thermoplastic properties of the modified starch were analyzed by different analytical methods, including Fourier-transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). In conclusion, the TGA showed lower thermal stability in the functionalized starch compared to native starch. Some indications of thermoplastic behavior were observed from the DSC. Trade-off between functionality and thermostability needs to be overlooked when aiming to increase thermoplastic behavior and future work should explore TEMPO oxidation, to obtain better results from the TGA. / Det finns många fördelar med att ersätta traditionella, icke-biologiskt nedbrytbara syntetiska plaster med biobaserade plaster. Stärkelse är globalt tillgängligt, billigt, förnybart och nedbrytbart. I nuläget har stärkelse dock en bristande produktprestanda och är relativt svår att bearbeta eftersom konventionella smält bearbetningstekniker inte kan användas. Genom att ge stärkelse termoplastiska egenskaper kan man förbättra de mekaniska egenskaperna och bearbetbarheten. Syftet med projektet var därför att modifiera stärkelse och introducera termoplastiska egenskaper. Genomförandet av detta innefattade flera olika experiment där aromatiska, cykliska och alifatiska sidogrupper tillsattes till stärkelsen. Effekten av de olika sidogrupperna gav värdefull insikt i hur materialegenskaperna förändrades. Därefter analyserades de termoplastiska egenskaperna hos den modifierade stärkelsen med olika analytiska metoder, inklusive Fourier-transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA) och Differential Scanning Calorimetry (DSC). Slutsatsen var att TGA visade en lägre termisk stabilitet hos den funktionaliserade stärkelsen jämfört med i den naturliga stärkelsen samt att vissa indikationer på termoplastiskt beteende observerades med hjälp av DSC analysen. En avvägning mellan funktionalitet och termisk stabilitet bör tas i beaktande i strävandet efter att öka termoplastiskt beteende. Framtida arbete inom ämnet rekommenderas att utforska TEMPO-oxidation för att uppnå bättre resultat från TGA.
|
224 |
Manufacturing process modelling of thermoplastic composite resistance weldingTalbot, Edith January 2005 (has links)
No description available.
|
225 |
Synthesis and Characterization of Poly(Alloocimene-b-Isobutylene) Thermoplastic ElastomersGergely, Attila Levente 11 September 2014 (has links)
No description available.
|
226 |
Anionically Polymerized Supramolecular Thermoplastic ElastomersKumar, Nishant C. 21 May 2015 (has links)
No description available.
|
227 |
TPU NANOCOMPOSITES WITH 1D AND 2D CARBONEOUS FILLERSYuan, Dian 03 June 2015 (has links)
No description available.
|
228 |
Thermoplastic Composite with Vapor Grown Carbon FiberLee, Jaewoo January 2005 (has links)
No description available.
|
229 |
Comparison between field and analytical results on the structural performance of deeply buried 30-inch diameter thermoplastic pipesMoran, Alan P. January 2001 (has links)
No description available.
|
230 |
Application of Photochemistry and Dynamic Chemistry in Designing Materials tuned through Macromolecular ArchitectureDe Alwis, Watuthanthrige Nethmi Thanurika 19 July 2021 (has links)
No description available.
|
Page generated in 0.0538 seconds