Diplomová práce se zabývá problematikou zvyšování produktivity pomocí metody štíhlé výroby zvané Lean. V dnešní době je potřeba udržet si přízeň zákazníka a finanční prosperitu firmy. Právě štíhlá výroba se zaměřuje na spokojenost zákazníka a na zvýšení finančního přínosu firmě, tím, že se snaží odstranit plýtvání, která se vyskytují v procesu. Lean Six Sigma je metoda, která se zaměřuje na spokojenost zákazníka (Lean) a na zdokonalování procesů (Six Sigma). Jejím cílem je zvýšit kvalitu a zároveň snížit náklady a dobu dodání. První část diplomové práce se zabývá nástroji štíhlé výroby a detailně popisuje metody, které budou použity v praxi. V praktické části diplomové práce byly využity nástroje Lean Six Sigma především metoda DMAIC, která je označována za systematický přístup k řešení problémů. Skládá se z pěti částí: definování, měření, analýza, zlepšení a kontrola.

This diploma thesis deals with methods and options of valuation of companies.An integral part of the valuation is also financial analysis, strategical analysis and financial plan for year 2015 - 2019. The aim is to valuate a specific company GMF Aquapark Prague a.s. which is an entrepreneur of water park in Čestlice near Prague. I used to valuation by discounted cash flow method and economic value added method. The company is valuated to date 31. 12. 2014.

This diploma thesis covers the topic of magnetic fluids and their utilisation in hydrodynamic dampers. The first part of the work consists of research on the current state of technology in hydraulic dampers with the focus on dampers using magnetorhelogical fluid. This chapter is followed by research on magnetic fluids with regard to their physical properties and mathematical description, which is used for CFD simulation of flow. The second part deals with the computational simulation of the flow of MR liquid in real MR damper in order to determine the damping characteristic and it's comparison with the experimental data.

This master’s thesis introduces a slide bearing analysis using the MBS software tool of FEV Virtual Engine, including real surface topography based on 3D roughness measurements. The first half of the thesis gives a brief overview about gasoline combustion engines, slide bearing usage in engines, slide bearing construction and about essential approaches for the characterization of elasto-hydrodynamic behavior. In the second half, the process of model building, rough surface measurement and preparation of analyses are described. At the end of this thesis, the results of the analyses are shown and discussed.

This thesis deals with the assessment of the location of the new transformer station 400/110 kV in terms of conditions in the 110 kV network, which will be supplied from this substation. The new 400/110 kV transformer station will replace the current transformer station 220/110 kV Tábor, which will be decommissioned in connection with the overall 220 kV system attenuation in the Czech power transmission system. On the basis of the load flow simulation of the 110 kV distribution network and calculations of the short-circuit conditions performed by simulation SW LUG two variants of the location of a new 400/110 kV transformer station were assessed. The 110 kV network calculations were focused on the evaluation of voltage conditions, the 110 kV lines loading in the standard operating scheme and in failure states according to the N-1 criterion, short-circuit conditions and losses. On the basis of the computational analyses, the technical measures necessary to ensure the reliable operation of the 110 kV network in the given area are designed and economically evaluated.

The diploma thesis is focused on proposal of workplace modification according to the lean manufacturing methodology (DMAIC). The target is to minimize the wasting and to increase the production efficiency based on LEAN tools implementation. The theoretical part of the thesis defines the basic terms, such as primarily lean production, DMAIC, wasting. In the practical part there is at problem analysis using the DMAIC method, then the proposal for improvement is solved, that contains reduction of wasting, process of the project, timetable, costs and implantation of the solution, finally there is evaluated the benefit.

This Master's thesis deals with the optimilization of the production process of the firm ADC Czech Republic s.r.o. The first part the tesiis focused on the research study of the issue, which is used in the practical part. The second one is devoted to brief introduction of the company ADD Czech Republic and the introduction of the product, that is engineered on the production line. The next chapter is divided into three parts. The first chapter creates an analysis of actual condition. The second deals with the implementation of the proposial. Finally, the third part is focused on other possible proposals, which have not been properly worked out

The diploma thesis is focused on determining the value of the production cooperative Kovoplast. To valuation will be used income-base method, Discounted Cash Flow. The value of the company will be determined at 31. 12. 2016.

This diploma thesis is divided into two main parts. The first part describes issues of the proposal of water management measures in land consolidation process. Second part deals with the conceptual proposal of water management measures in the specific cadastral area. This part also include graphic attachments.

The diploma thesis deals with the design of the flood protection of the village Hrušky (Vyškov district). The hydraulic analysis of the water flow on the rivers Litava (river station km 19,460 - 20,928) and Rakovec (river station km 0,000 - 0,638) was done. The hydraulic analysis was performed on the Q5, Q20 and Q100 flows. For analysis was used a 2D numerical flow model in HEC-RAS 5.0.6. Based on results was designed a flood protection including a dry reservoir. The input data for the diploma thesis was the 2013 study „Litava II – přírodě blízká protipovodňová opatření a obnova přirozené hydromorfologie a retenční kapacity toku a nivy v úseku ř. km 16,0 (Újezd u Brna) až ř. km 24,0 (Slavkov u Brna)“. The diploma thesis was processed as a real project in the design office of Regioprojekt Brno, s.r.o.