51 |
Design patterns for healthcare and secure overnight centres of truck drivers (trucking centre).Sonnenberg, Gustav. January 2007 (has links)
Thesis (MTech. degree in Architectural Technology (Management)) / Revision of the Road Transportation Act 74 of 1977, with the de-regulation of the long-haul trucking industry, caused a fast growing, highly competitive industry, where the road transport industry revolves around cost of delivery and delivery times. Unreasonable customer expectations place a burden on truck drivers who are mostly uneducated and mostly ignorant of the hazardous conditions under which they work. The study therefore investigates the causes and development of hazard patterns (with frequencies of accidents), the circumstances and conditions of long-haul trucking that make the establishment of trucking centres necessary, as well as the requirements of truck drives, employers and owner-drivers to see if the proposed trucking centres will be rejected or accepted by them. The proposed centres would provide safe rest periods, healthy food, continuous health and traffic education and would allow for social interaction between visitors at these centres. These conditions would contribute to the reduction of number of road accidents and stem the spread of sexually transmitted diseases.
|
52 |
Freight terminal layout and operationsGue, Kevin R. 08 1900 (has links)
No description available.
|
53 |
Development of a tipper body subframe : a pre-study at SSABHägglund, Mattias January 2014 (has links)
This thesis is performed on master level and covers an assignment given by the Value Added Services(VAS) department at SSAB (Oxelösund, Sweden). The thesis has been carried out by Mattias Hägglundduring the fall of 2014 atMälardalen University. The transportation industry has over time developed to be more efficient and environmentally aware. Looking at the truck industry shows that the development is strong and constant, new solutions and improvements is being introduced every year. One result of this is reduced fuel consumption and/or increased loading capacity. In the mining industry for example, can a few hundred kilos extra payload make a big different at the end of the day. This constant development seen in many fields is something that SSAB wants to take part in. By using product diversification canthe VAS department reach new customers and secure sales of SSAB steel. Subframes, being a natural step from tipper bodies, are worth to consider as a possible project start-up. Combined with SSABs current tipper body program could a new subframe make its way to the market. This project have adapted a new product development process in order to come up with a subframe design not yet physically tested, but theoretically superior to conventional subframes. Each development phase of this process is explained and executed in the report, giving the reader a detailed step-by-step overview. The projects result builds on the knowledge attained from the course of the project and simulation results. With the use of a CAD-program and by applying FEM, have a number of concepts been analysed with regards to their strength and rigidity. The simulation results have made it possible to design a final solution where a number of demands and desired properties have been fulfilled. The result from this thesis work have reduced the weight by 7%, increased rigidity about 20% and substantially improved the strength in comparison to a typical subframe. This shows that there are possibilities to improve on the current subframe design, and that there is cause for SSAB to make further research and development in the subject of tipper body subframes.
|
54 |
The trucking industry and the implementation of the commercial driver's licenseDick, Robert M. January 2008 (has links)
Thesis (Ph. D.)--University of Nevada, Reno, 2008. / "December, 2008." Includes bibliographical references (leaves 164-179). Online version available on the World Wide Web.
|
55 |
Commercial Motor Vehicle Driver Safety: An Application of Ethics TheoryDouglas, Matthew Aaron 08 1900 (has links)
Safety is an important aspect of ethical, socially responsible logistics. Current U.S. motor carrier (MC) safety research topical coverage includes the effects of individual and environmental influences, carrier safety management, and regulatory compliance on carrier safety and driver fatigue/safety performance. Interestingly, little research on the subject of truck drivers' safety attitudes and behaviors exists and the underlying decision-making processes that guide drivers' safety-related behaviors have received little attention. Furthermore, researchers have not provided an integrated framework that explains individual, organizational, and regulatory factors' impact on drivers' safety decision-making and performance. Truck drivers' safety judgments, decisions, and actions must adhere to societal safety norms. To that end, ethical decision-making theory that draws from the deontological and teleological traditions in moral philosophy provides a theoretical foundation and integrated framework necessary to better understand drivers' safety decision-making processes. The current research sought to determine how drivers rely on safety norms and perceived consequences in forming safety judgments and behavioral intentions. Furthermore, the study was designed to explore how various factors (i.e., individual, organizational, and regulatory) influence drivers' safety decision-making processes. Specifically, the study sought to answer the broad question, "How do commercial motor vehicle drivers make safety-related decisions, and how do individual, organizational, and regulatory factors influence drivers' safety decision-making processes?" An experimental two-factor design (2×2) was used to manipulate safety norms (i.e., "deontologically unsafe situation" and "deontologically safe situation") and consequences (i.e., "positive consequences" and "negative consequences"). Multivariate statistical analysis revealed that drivers primarily rely on deontological evaluations in forming safety judgments. Furthermore, drivers primarily relied on safety judgments when forming behavioral intentions. Drivers' attitudes toward unsafe actions and the effectiveness of driver-related safety regulations were also influential to drivers' judgments and intentions, respectively. The empirical findings demonstrate to managers that communication and education of safety norms may be highly effective to improve safety in unique occupational contexts where employees are given high levels of responsibility with little physical supervision, and where judgment errors can have devastating consequences for multiple stakeholders.
|
56 |
Odpružení kabiny nákladního vozidla / Truck Cabin SuspensionHradský, Martin January 2019 (has links)
The diploma thesis, which belongs to the area of vehicle dynamics, deals with the issue of suspension of trucks cabins. In particular, it focuses on the suspension of a race truck cab such as the Rally Dakar. Includes an overview of truck suspension (especially cabs), driving comfort assessment methods and the impact of vibration on human. To verify the suitability of using different cab suspension concepts, a multibody model was built in program MSC ADAMS. Suitable primary suspension has been found appropriate for this model. Cab suspension was tested for driving safety, but first for driving comfort.
|
57 |
Carton Clamp Methodologies and the Effects on Load Containment and RetentionBlumer, Tyler D 01 December 2013 (has links)
ABSTRACT
Carton Clamp Test Methodologies and the Effects on
Load Containment and Retention
Tyler Don Blumer
A carton clamp is an alternative device for moving packages and material. Instead of using iron tines like that of a conventional forklift, a carton clamp uses two large aluminum platens to slightly compress and secure the load for handling. This is advantageous as it allows operators to move layers of a unitized load individually, and eliminates the need for a pallet when handling full unitized loads. When using a carton clamp attachment, it is often difficult for operators to accurately gauge the amount of force being applied to the load. The required clamping force changes depending on the size, shape, and weight of the load. This creates the potential for under-clamping (slippage) and over-clamping (compressive damage). Seeing a market need for a reliable means of testing, two organizations set out to develop a testing protocol.
A rift formed between schools of thought regarding the correct testing procedure. ISTA provides a sterile, calculated, and stationary simulation of carton clamp handling in its ISTA 6-SAMS test protocol. ASTM offers a more holistic, dynamic, observational approach in its mobile ASTM 6055 standard protocol. One school of thought is suggested to imply that a package should be developed to be handled by the carton clamp (ASTM). The other school of thought is that the carton clamp attachment should be properly adjusted to the package specimen (ISTA).
Previous studies have been performed citing the ISTA standard and using a specialized carton clamping device vibration device that is calibrated for laboratory research. Arguably, this method, though repeatable in nature, does not accurately simulate carton clamp handling found in industry. Likewise, the equipment investment is cost prohibitive for those in industry wishing to duplicate such a study. ASTM uses a carton clamp truck as used in industry, but does not specify any specific parameters making repeatability between laboratories and practitioners ambiguous.
This study examined whether or not a common ground can be reached; implementing a carton clamp lift truck as found in industry allowing for mobile (hazard course) testing. A modified version of ISTA 3B will be paired off against ASTM 6055 for evaluating both column and cross stack pallet patterns with a variety of treatments. This study attempted to determine if carton clamps as found in industry are capable and repeatable enough to provide consistent data. Similarly, this study examined the test methodologies effect on load containment via stretch film force, load retention via unitized load slippage, and the effects of ride height and driver interaction. The study sought to understand if these effects are uniform across the unitized load, or if particular layers of the load more affected than others.
|
58 |
Design nákladního automobilu s elektrickým pohonem / Design of Electric Cargo TruckBlahynka, Roman January 2014 (has links)
This master‘s thesis pertains to the design of a cargo truck with battery electric drivetrain. The presented design offers a solution which respects the technical requirements of such a vehicle, ergonomic needs of its crew, and demands on the aesthetics of a modern commercial vehicle. In consideration of the chosen drivetrain, this solution is proposed as a concept with an outlook of 10 to 15 years in the future. In keeping with the specified goals, this vehicle offers a novel appearance which attempts to characterize the electric drivetrain with certain visual elements, includes solutions that are readily available or currently in development, and optimizes ergonomics for maximum user comfort and safety.
|
59 |
OPTIMIZATION OF VEHICLE DYNAMICS FOR ENHANCED CLASS 8 TRUCK PLATOONINGBrady Black (9500207) 16 December 2020 (has links)
<div>The heavy duty transportation sector is projected to grow in the coming decades. Increasing the fuel economy of class 8 vehicles would simultaneously decrease CO2 emissions and decrease the annual fuel expenditures that account for nearly a quarter of cargo companies' annual budgets. Most technology that has aimed to do this has primarily been focused on either improvements in engine efficiency or reduction of aerodynamic drag. This thesis addresses a somewhat different approach: the optimization of vehicle dynamics in order to realize fuel savings. </div><div><br></div><div>Through partnerships with Peloton Technology and Cummins, tests and simulations were conducted on corridors with grades up to 5% that indicate fuel savings of up to 14.4% can be achieved through the combination of three strategies: two-truck platooning, long-horizon predictive cruise control (LHPCC), and simultaneous shifting. Two-truck platooning is the act of drafting a rear truck behind a front truck. It has been shown that this not only reduces the drag of the follow vehicle, but also that of the lead vehicle. LHPCC is an optimization of the lead truck's velocity over a given corridor to get "from point A to point B" in the most efficient way possible whilst doing so with a trip time constraint. Last is the use of simultaneous shifting, which allows the follow vehicle to maintain the proper platoon gap distance behind</div><div>the lead truck.</div>
|
60 |
Automotive rearview mirror in plasticAlriksson, Kristofer January 2011 (has links)
The purpose of this thesis work was to carry out initial studies on Scania’s possibility to have plastic rearview mirror glasses as that for example may reduce costs and problems for Scania’s customers and enable another design of the mirror assembly. It was performed by studying the legislative and Scania demands regarding rearview mirrors to write a test program, find and order plastic mirrors, and then perform the tests and evaluate the mirrors to see if they seem good enough for Scania’s trucks. A Scania technical regulation for rearview mirror glass was also written. The tested mirrors were a Scania glass mirror as reference, a PC mirror from Sabic, a PC and a PMMA mirror from Specchidea, a mirror from SMR automotive, an ABS mirror from Ficocipa/Renault, an ABS mirror from Ford and a PC plastic from Bayer and they were tested for scratch resistance, temperature variations, impact resistance, corrosion and chemical resistance in that order. If a sample did not pass a certain test, it was not subjected to the next one. Of all samples it was only the SMR mirror and the reference glass mirror that passed the first test (scratch resistance). The others became too scratched and were not tested further. The SMR and the glass mirror also withstood all the following tests very good, the SMR mirror was the best one of the tested mirrors. Probably the SMR mirror was the best one because many of the other mirrors did not seem to have been made for outdoor conditions and because it seemed to be the most modern mirror with a good abrasion resistant coating. It was concluded that there is a future for plastic mirror glasses, that it would be interesting to do more tests on the mirrors, for example a UV test and a distortion test, and to test more mirrors as a new generation of plastic mirror glass seem to be underway. It would also be interesting to know how much cheaper and lighter the whole mirror assembly can become by changing to plastic mirror glass, which weighs 68% less than a glass mirror.
|
Page generated in 0.0436 seconds